* Re: [PR PATCH] [Updated] pipewire: update to 0.3.28
2021-05-20 11:26 [PR PATCH] pipewire: update to 0.3.28 st3r4g
@ 2021-05-20 18:25 ` st3r4g
2021-05-20 18:29 ` st3r4g
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: st3r4g @ 2021-05-20 18:25 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 3935 bytes --]
There is an updated pull request by st3r4g against master on the void-packages repository
https://github.com/st3r4g/void-packages pipewire-0.3.28
https://github.com/void-linux/void-packages/pull/31012
pipewire: update to 0.3.28
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
- The main change here is the move of default configs to `/usr/share`. `xbps` handled this well in my case (I had all default configs, which were deleted as expected). Can anyone verify that modified configs are left?
- I have briefly tried the filter-chains (`pipewire -c filter-chain/<X>.conf` runs a pipewire client that creates these "effect nodes") and they require ladspa plugins (one is not even packaged I think) but I don't think they should be hard dependencies. Also, some are borked still (e.g. `demonic.conf` currently only works with a `audio.channels = 1` workaround).
<details>
<summary>File diff</summary>
```
--- /tmp/old 2021-05-20 01:30:21.627554276 +0200
+++ /tmp/new 2021-05-20 01:30:37.523553285 +0200
@@ -1,14 +1,3 @@
-/etc/pipewire/client-rt.conf
-/etc/pipewire/client.conf
-/etc/pipewire/jack.conf
-/etc/pipewire/media-session.d/alsa-monitor.conf
-/etc/pipewire/media-session.d/bluez-monitor.conf
-/etc/pipewire/media-session.d/media-session.conf
-/etc/pipewire/media-session.d/v4l2-monitor.conf
-/etc/pipewire/pipewire-pulse.conf
-/etc/pipewire/pipewire.conf
-/etc/pipewire/media-session.d/with-jack
-/etc/pipewire/media-session.d/with-pulseaudio
/usr/bin/pipewire
/usr/bin/pipewire-media-session
/usr/bin/pipewire-pulse
@@ -165,6 +154,22 @@
/usr/share/man/man1/pw-mon.1
/usr/share/man/man1/pw-profiler.1
/usr/share/man/man5/pipewire.conf.5
+/usr/share/pipewire/client-rt.conf
+/usr/share/pipewire/client.conf
+/usr/share/pipewire/filter-chain/demonic.conf
+/usr/share/pipewire/filter-chain/sink-dolby-surround.conf
+/usr/share/pipewire/filter-chain/sink-eq6.conf
+/usr/share/pipewire/filter-chain/sink-matrix-spatialiser.conf
+/usr/share/pipewire/filter-chain/source-rnnoise.conf
+/usr/share/pipewire/jack.conf
+/usr/share/pipewire/media-session.d/alsa-monitor.conf
+/usr/share/pipewire/media-session.d/bluez-monitor.conf
+/usr/share/pipewire/media-session.d/media-session.conf
+/usr/share/pipewire/media-session.d/v4l2-monitor.conf
+/usr/share/pipewire/media-session.d/with-jack
+/usr/share/pipewire/media-session.d/with-pulseaudio
+/usr/share/pipewire/pipewire-pulse.conf
+/usr/share/pipewire/pipewire.conf
/usr/bin/pw-midiplay -> /usr/bin/pw-cat
/usr/bin/pw-midirecord -> /usr/bin/pw-cat
/usr/bin/pw-play -> /usr/bin/pw-cat
```
</details>
A patch file from https://github.com/void-linux/void-packages/pull/31012.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.28-31012.patch --]
[-- Type: text/x-diff, Size: 3929 bytes --]
From f3e2b0953ba35e228784b1db20546a4207a7f99c Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Thu, 20 May 2021 13:13:52 +0200
Subject: [PATCH] pipewire: update to 0.3.28
---
srcpkgs/pipewire/patches/6df32666b4.patch | 62 +++++++++++++++++++++++
srcpkgs/pipewire/template | 5 +-
2 files changed, 64 insertions(+), 3 deletions(-)
create mode 100644 srcpkgs/pipewire/patches/6df32666b4.patch
diff --git a/srcpkgs/pipewire/patches/6df32666b4.patch b/srcpkgs/pipewire/patches/6df32666b4.patch
new file mode 100644
index 000000000000..8eea42116ad6
--- /dev/null
+++ b/srcpkgs/pipewire/patches/6df32666b4.patch
@@ -0,0 +1,62 @@
+From 6df32666b44b5174aace3dcff39f39a58eba508f Mon Sep 17 00:00:00 2001
+From: Wim Taymans <wtaymans@redhat.com>
+Date: Thu, 20 May 2021 11:22:04 +0200
+Subject: [PATCH] filter-chain: check external ports only once
+
+When we duplicate the pipeline to match the channels, only check
+if a port was used only once for the first instance. Makes
+demonic filter work again.
+---
+ src/modules/module-filter-chain.c | 18 ++++--------------
+ 1 file changed, 4 insertions(+), 14 deletions(-)
+
+diff --git a/src/modules/module-filter-chain.c b/src/modules/module-filter-chain.c
+index b1e727069..bb346b6d8 100644
+--- src/modules/module-filter-chain.c
++++ src/modules/module-filter-chain.c
+@@ -972,16 +972,6 @@ static int parse_link(struct graph *graph, struct spa_json *json)
+ pw_log_error("unknown input port %s", input);
+ return -ENOENT;
+ }
+- if (in_port->external != SPA_ID_INVALID) {
+- pw_log_info("%s already used as graph input %d, use mixer",
+- input, in_port->external);
+- return -EINVAL;
+- }
+- if (out_port->external != SPA_ID_INVALID) {
+- pw_log_info("%s already used as graph output %d, use copy",
+- output, out_port->external);
+- return -EINVAL;
+- }
+ if (in_port->n_links > 0) {
+ pw_log_info("Can't have more than 1 link to %s, use a mixer", input);
+ return -ENOTSUP;
+@@ -1334,10 +1324,10 @@ static int setup_graph(struct graph *graph, struct spa_json *inputs, struct spa_
+ } else {
+ desc = port->node->desc;
+ d = desc->desc;
+- if (port->external != SPA_ID_INVALID) {
++ if (i == 0 && port->external != SPA_ID_INVALID) {
+ pw_log_error("input port %s[%d]:%s already used as input %d, use mixer",
+ port->node->name, i, d->PortNames[port->p],
+- graph->n_input);
++ port->external);
+ res = -EBUSY;
+ goto error;
+ }
+@@ -1382,10 +1372,10 @@ static int setup_graph(struct graph *graph, struct spa_json *inputs, struct spa_
+ } else {
+ desc = port->node->desc;
+ d = desc->desc;
+- if (port->external != SPA_ID_INVALID) {
++ if (i == 0 && port->external != SPA_ID_INVALID) {
+ pw_log_error("output port %s[%d]:%s already used as output %d, use copy",
+ port->node->name, i, d->PortNames[port->p],
+- graph->n_output);
++ port->external);
+ res = -EBUSY;
+ goto error;
+ }
+--
+GitLab
+
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index a38a16e3e975..43e3c1cfc9b4 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,6 +1,6 @@
# Template file for 'pipewire'
pkgname=pipewire
-version=0.3.27
+version=0.3.28
revision=1
build_style=meson
configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
@@ -18,8 +18,7 @@ license="MIT"
homepage="https://pipewire.org/"
changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=657db1b9a29ae17a9f1d9782a45bda2ba5a893fef55e1ca26453e8f7f2d4e64e
-conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+checksum=1d9271e121a5049aef379e9bb7c50524faa6f971e668806637d7b9df1b7cab88
build_options="sdl2"
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: pipewire: update to 0.3.28
2021-05-20 11:26 [PR PATCH] pipewire: update to 0.3.28 st3r4g
2021-05-20 18:25 ` [PR PATCH] [Updated] " st3r4g
@ 2021-05-20 18:29 ` st3r4g
2021-05-21 0:05 ` ericonr
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: st3r4g @ 2021-05-20 18:29 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 212 bytes --]
New comment by st3r4g on void-packages repository
https://github.com/void-linux/void-packages/pull/31012#issuecomment-845363512
Comment:
of course the commit that fixes the `demonic.conf` bug has a cursed hash
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: pipewire: update to 0.3.28
2021-05-20 11:26 [PR PATCH] pipewire: update to 0.3.28 st3r4g
2021-05-20 18:25 ` [PR PATCH] [Updated] " st3r4g
2021-05-20 18:29 ` st3r4g
@ 2021-05-21 0:05 ` ericonr
2021-05-21 7:39 ` [PR PATCH] [Updated] " st3r4g
2021-05-21 19:02 ` [PR PATCH] [Merged]: " ericonr
4 siblings, 0 replies; 6+ messages in thread
From: ericonr @ 2021-05-21 0:05 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 356 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/31012#issuecomment-845560153
Comment:
I think the commit message could mention that the configs have been moved to `/usr/share`.
Altered configs are indeed kept around, and the package is working fine for me. Haven't tested the filter chains. Thanks!
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PR PATCH] [Updated] pipewire: update to 0.3.28
2021-05-20 11:26 [PR PATCH] pipewire: update to 0.3.28 st3r4g
` (2 preceding siblings ...)
2021-05-21 0:05 ` ericonr
@ 2021-05-21 7:39 ` st3r4g
2021-05-21 19:02 ` [PR PATCH] [Merged]: " ericonr
4 siblings, 0 replies; 6+ messages in thread
From: st3r4g @ 2021-05-21 7:39 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 3954 bytes --]
There is an updated pull request by st3r4g against master on the void-packages repository
https://github.com/st3r4g/void-packages pipewire-0.3.28
https://github.com/void-linux/void-packages/pull/31012
pipewire: update to 0.3.28
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
- The main change here is the move of default configs to `/usr/share`. `xbps` handled this well in my case (I had all default configs, which were deleted as expected). Can anyone verify that modified configs are left?
- I have briefly tried the filter-chains (`pipewire -c filter-chain/<X>.conf` runs a pipewire client that creates these "effect nodes") and they require ladspa plugins (one is not even packaged I think) but I don't think they should be hard dependencies. Also, some are borked still (e.g. `demonic.conf` ~~currently only works with a `audio.channels = 1` workaround~~ patch imported).
<details>
<summary>File diff</summary>
```
--- /tmp/old 2021-05-20 01:30:21.627554276 +0200
+++ /tmp/new 2021-05-20 01:30:37.523553285 +0200
@@ -1,14 +1,3 @@
-/etc/pipewire/client-rt.conf
-/etc/pipewire/client.conf
-/etc/pipewire/jack.conf
-/etc/pipewire/media-session.d/alsa-monitor.conf
-/etc/pipewire/media-session.d/bluez-monitor.conf
-/etc/pipewire/media-session.d/media-session.conf
-/etc/pipewire/media-session.d/v4l2-monitor.conf
-/etc/pipewire/pipewire-pulse.conf
-/etc/pipewire/pipewire.conf
-/etc/pipewire/media-session.d/with-jack
-/etc/pipewire/media-session.d/with-pulseaudio
/usr/bin/pipewire
/usr/bin/pipewire-media-session
/usr/bin/pipewire-pulse
@@ -165,6 +154,22 @@
/usr/share/man/man1/pw-mon.1
/usr/share/man/man1/pw-profiler.1
/usr/share/man/man5/pipewire.conf.5
+/usr/share/pipewire/client-rt.conf
+/usr/share/pipewire/client.conf
+/usr/share/pipewire/filter-chain/demonic.conf
+/usr/share/pipewire/filter-chain/sink-dolby-surround.conf
+/usr/share/pipewire/filter-chain/sink-eq6.conf
+/usr/share/pipewire/filter-chain/sink-matrix-spatialiser.conf
+/usr/share/pipewire/filter-chain/source-rnnoise.conf
+/usr/share/pipewire/jack.conf
+/usr/share/pipewire/media-session.d/alsa-monitor.conf
+/usr/share/pipewire/media-session.d/bluez-monitor.conf
+/usr/share/pipewire/media-session.d/media-session.conf
+/usr/share/pipewire/media-session.d/v4l2-monitor.conf
+/usr/share/pipewire/media-session.d/with-jack
+/usr/share/pipewire/media-session.d/with-pulseaudio
+/usr/share/pipewire/pipewire-pulse.conf
+/usr/share/pipewire/pipewire.conf
/usr/bin/pw-midiplay -> /usr/bin/pw-cat
/usr/bin/pw-midirecord -> /usr/bin/pw-cat
/usr/bin/pw-play -> /usr/bin/pw-cat
```
</details>
A patch file from https://github.com/void-linux/void-packages/pull/31012.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-0.3.28-31012.patch --]
[-- Type: text/x-diff, Size: 3970 bytes --]
From 6e846aede33f96c137384c9ac20fb30ff512044d Mon Sep 17 00:00:00 2001
From: Stefano Ragni <stefano.ragni@outlook.com>
Date: Thu, 20 May 2021 13:13:52 +0200
Subject: [PATCH] pipewire: update to 0.3.28
Default config files moved to /usr/share
---
srcpkgs/pipewire/patches/6df32666b4.patch | 62 +++++++++++++++++++++++
srcpkgs/pipewire/template | 5 +-
2 files changed, 64 insertions(+), 3 deletions(-)
create mode 100644 srcpkgs/pipewire/patches/6df32666b4.patch
diff --git a/srcpkgs/pipewire/patches/6df32666b4.patch b/srcpkgs/pipewire/patches/6df32666b4.patch
new file mode 100644
index 000000000000..8eea42116ad6
--- /dev/null
+++ b/srcpkgs/pipewire/patches/6df32666b4.patch
@@ -0,0 +1,62 @@
+From 6df32666b44b5174aace3dcff39f39a58eba508f Mon Sep 17 00:00:00 2001
+From: Wim Taymans <wtaymans@redhat.com>
+Date: Thu, 20 May 2021 11:22:04 +0200
+Subject: [PATCH] filter-chain: check external ports only once
+
+When we duplicate the pipeline to match the channels, only check
+if a port was used only once for the first instance. Makes
+demonic filter work again.
+---
+ src/modules/module-filter-chain.c | 18 ++++--------------
+ 1 file changed, 4 insertions(+), 14 deletions(-)
+
+diff --git a/src/modules/module-filter-chain.c b/src/modules/module-filter-chain.c
+index b1e727069..bb346b6d8 100644
+--- src/modules/module-filter-chain.c
++++ src/modules/module-filter-chain.c
+@@ -972,16 +972,6 @@ static int parse_link(struct graph *graph, struct spa_json *json)
+ pw_log_error("unknown input port %s", input);
+ return -ENOENT;
+ }
+- if (in_port->external != SPA_ID_INVALID) {
+- pw_log_info("%s already used as graph input %d, use mixer",
+- input, in_port->external);
+- return -EINVAL;
+- }
+- if (out_port->external != SPA_ID_INVALID) {
+- pw_log_info("%s already used as graph output %d, use copy",
+- output, out_port->external);
+- return -EINVAL;
+- }
+ if (in_port->n_links > 0) {
+ pw_log_info("Can't have more than 1 link to %s, use a mixer", input);
+ return -ENOTSUP;
+@@ -1334,10 +1324,10 @@ static int setup_graph(struct graph *graph, struct spa_json *inputs, struct spa_
+ } else {
+ desc = port->node->desc;
+ d = desc->desc;
+- if (port->external != SPA_ID_INVALID) {
++ if (i == 0 && port->external != SPA_ID_INVALID) {
+ pw_log_error("input port %s[%d]:%s already used as input %d, use mixer",
+ port->node->name, i, d->PortNames[port->p],
+- graph->n_input);
++ port->external);
+ res = -EBUSY;
+ goto error;
+ }
+@@ -1382,10 +1372,10 @@ static int setup_graph(struct graph *graph, struct spa_json *inputs, struct spa_
+ } else {
+ desc = port->node->desc;
+ d = desc->desc;
+- if (port->external != SPA_ID_INVALID) {
++ if (i == 0 && port->external != SPA_ID_INVALID) {
+ pw_log_error("output port %s[%d]:%s already used as output %d, use copy",
+ port->node->name, i, d->PortNames[port->p],
+- graph->n_output);
++ port->external);
+ res = -EBUSY;
+ goto error;
+ }
+--
+GitLab
+
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index a38a16e3e975..43e3c1cfc9b4 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,6 +1,6 @@
# Template file for 'pipewire'
pkgname=pipewire
-version=0.3.27
+version=0.3.28
revision=1
build_style=meson
configure_args="-Dman=enabled -Dgstreamer=enabled -Ddocs=enabled -Dsystemd=disabled
@@ -18,8 +18,7 @@ license="MIT"
homepage="https://pipewire.org/"
changelog="https://gitlab.freedesktop.org/pipewire/pipewire/-/raw/master/NEWS"
distfiles="https://gitlab.freedesktop.org/pipewire/pipewire/-/archive/${version}/pipewire-${version}.tar.gz"
-checksum=657db1b9a29ae17a9f1d9782a45bda2ba5a893fef55e1ca26453e8f7f2d4e64e
-conf_files="/etc/pipewire/*.conf /etc/pipewire/media-session.d/*.conf"
+checksum=1d9271e121a5049aef379e9bb7c50524faa6f971e668806637d7b9df1b7cab88
build_options="sdl2"
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PR PATCH] [Merged]: pipewire: update to 0.3.28
2021-05-20 11:26 [PR PATCH] pipewire: update to 0.3.28 st3r4g
` (3 preceding siblings ...)
2021-05-21 7:39 ` [PR PATCH] [Updated] " st3r4g
@ 2021-05-21 19:02 ` ericonr
4 siblings, 0 replies; 6+ messages in thread
From: ericonr @ 2021-05-21 19:02 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 3792 bytes --]
There's a merged pull request on the void-packages repository
pipewire: update to 0.3.28
https://github.com/void-linux/void-packages/pull/31012
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
- The main change here is the move of default configs to `/usr/share`. `xbps` handled this well in my case (I had all default configs, which were deleted as expected). Can anyone verify that modified configs are left?
- I have briefly tried the filter-chains (`pipewire -c filter-chain/<X>.conf` runs a pipewire client that creates these "effect nodes") and they require ladspa plugins (one is not even packaged I think) but I don't think they should be hard dependencies. Also, some are borked still (e.g. `demonic.conf` ~~currently only works with a `audio.channels = 1` workaround~~ patch imported).
<details>
<summary>File diff</summary>
```
--- /tmp/old 2021-05-20 01:30:21.627554276 +0200
+++ /tmp/new 2021-05-20 01:30:37.523553285 +0200
@@ -1,14 +1,3 @@
-/etc/pipewire/client-rt.conf
-/etc/pipewire/client.conf
-/etc/pipewire/jack.conf
-/etc/pipewire/media-session.d/alsa-monitor.conf
-/etc/pipewire/media-session.d/bluez-monitor.conf
-/etc/pipewire/media-session.d/media-session.conf
-/etc/pipewire/media-session.d/v4l2-monitor.conf
-/etc/pipewire/pipewire-pulse.conf
-/etc/pipewire/pipewire.conf
-/etc/pipewire/media-session.d/with-jack
-/etc/pipewire/media-session.d/with-pulseaudio
/usr/bin/pipewire
/usr/bin/pipewire-media-session
/usr/bin/pipewire-pulse
@@ -165,6 +154,22 @@
/usr/share/man/man1/pw-mon.1
/usr/share/man/man1/pw-profiler.1
/usr/share/man/man5/pipewire.conf.5
+/usr/share/pipewire/client-rt.conf
+/usr/share/pipewire/client.conf
+/usr/share/pipewire/filter-chain/demonic.conf
+/usr/share/pipewire/filter-chain/sink-dolby-surround.conf
+/usr/share/pipewire/filter-chain/sink-eq6.conf
+/usr/share/pipewire/filter-chain/sink-matrix-spatialiser.conf
+/usr/share/pipewire/filter-chain/source-rnnoise.conf
+/usr/share/pipewire/jack.conf
+/usr/share/pipewire/media-session.d/alsa-monitor.conf
+/usr/share/pipewire/media-session.d/bluez-monitor.conf
+/usr/share/pipewire/media-session.d/media-session.conf
+/usr/share/pipewire/media-session.d/v4l2-monitor.conf
+/usr/share/pipewire/media-session.d/with-jack
+/usr/share/pipewire/media-session.d/with-pulseaudio
+/usr/share/pipewire/pipewire-pulse.conf
+/usr/share/pipewire/pipewire.conf
/usr/bin/pw-midiplay -> /usr/bin/pw-cat
/usr/bin/pw-midirecord -> /usr/bin/pw-cat
/usr/bin/pw-play -> /usr/bin/pw-cat
```
</details>
^ permalink raw reply [flat|nested] 6+ messages in thread