* [PR PATCH] Added occt and version bump
@ 2021-07-10 11:20 foopub
2021-07-10 12:45 ` gmsh: " ericonr
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: foopub @ 2021-07-10 11:20 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1829 bytes --]
There is a new pull request by foopub against master on the void-packages repository
https://github.com/foopub/void-packages master
https://github.com/void-linux/void-packages/pull/31884
Added occt and version bump
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
OpenCASCADE is needed for a lot of the functionality of gmsh, and it's suggested as one of the dependencies here: https://gitlab.onelab.info/gmsh/gmsh/-/wikis/Gmsh-compilation
I think it's reasonable to compile support for it by default.
A patch file from https://github.com/void-linux/void-packages/pull/31884.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-master-31884.patch --]
[-- Type: text/x-diff, Size: 1698 bytes --]
From 1b7a280967d21537944c15712a0b20e2daeac056 Mon Sep 17 00:00:00 2001
From: foo <krowlaxs@gmail.com>
Date: Sat, 10 Jul 2021 12:01:51 +0100
Subject: [PATCH] Added occt and version bump
---
srcpkgs/gmsh/template | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/gmsh/template b/srcpkgs/gmsh/template
index 0a499e40b139..616e140277b1 100644
--- a/srcpkgs/gmsh/template
+++ b/srcpkgs/gmsh/template
@@ -1,13 +1,13 @@
# Template file for 'gmsh'
pkgname=gmsh
-version=4.7.1
+version=4.8.4
revision=1
wrksrc="${pkgname}-${version}-source"
build_style=cmake
configure_args="-DENABLE_SYSTEM_CONTRIB=ON
-DENABLE_HXT=$(vopt_if hxt ON OFF)
-DENABLE_ZIPPER=$(vopt_if zipper ON OFF)"
-makedepends="freetype-devel glu-devel gmp-devel
+makedepends="freetype-devel glu-devel gmp-devel $(vopt_if occt occt-devel)
$(vopt_if fltk fltk-devel) blas-devel lapack-devel"
short_desc="Three-dimensional finite element mesh generator"
maintainer="Nathan Owens <ndowens@artixlinux.org>"
@@ -15,13 +15,14 @@ license="GPL-2.0-or-later"
homepage="https://gmsh.info"
changelog="http://gmsh.info/CHANGELOG.txt"
distfiles="https://gmsh.info/src/gmsh-${version}-source.tgz"
-checksum=c984c295116c757ed165d77149bd5fdd1068cbd7835e9bcd077358b503891c6a
+checksum=760dbdc072eaa3c82d066c5ba3b06eacdd3304eb2a97373fe4ada9509f0b6ace
-build_options="fltk hxt zipper"
-build_options_default="hxt"
+build_options="fltk occt hxt zipper"
+build_options_default="hxt occt"
desc_option_hxt="Enable HXT library"
desc_option_fltk="Enable FLTK GUI support"
+desc_option_occt="Enable OpenCASCADE support"
desc_option_zipper="Enable zip file compression/decompression"
CFLAGS="-fcommon"
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gmsh: Added occt and version bump
2021-07-10 11:20 [PR PATCH] Added occt and version bump foopub
@ 2021-07-10 12:45 ` ericonr
2021-07-10 14:21 ` [PR PATCH] [Updated] " foopub
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: ericonr @ 2021-07-10 12:45 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 258 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/31884#issuecomment-877632016
Comment:
Fix the commit message to be `gmsh: update to ...` and explain the reason for adding occt in the commit message body.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PR PATCH] [Updated] gmsh: Added occt and version bump
2021-07-10 11:20 [PR PATCH] Added occt and version bump foopub
2021-07-10 12:45 ` gmsh: " ericonr
@ 2021-07-10 14:21 ` foopub
2021-07-10 14:22 ` foopub
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: foopub @ 2021-07-10 14:21 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1840 bytes --]
There is an updated pull request by foopub against master on the void-packages repository
https://github.com/foopub/void-packages master
https://github.com/void-linux/void-packages/pull/31884
gmsh: Added occt and version bump
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
OpenCASCADE is needed for a lot of the functionality of gmsh, and it's suggested as one of the dependencies here: https://gitlab.onelab.info/gmsh/gmsh/-/wikis/Gmsh-compilation
I think it's reasonable to compile support for it by default.
A patch file from https://github.com/void-linux/void-packages/pull/31884.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-master-31884.patch --]
[-- Type: text/x-diff, Size: 1949 bytes --]
From 796321aa86c84571bdf8c9d5d1eb28a28fdf8e65 Mon Sep 17 00:00:00 2001
From: foo <krowlaxs@gmail.com>
Date: Sat, 10 Jul 2021 12:01:51 +0100
Subject: [PATCH] gmsh: update to 4.8.4
OpenCASCADE is needed for a lot of the functionality of gmsh (i.e. in FreeCAD), and it's suggested as one of the dependencies here: https://gitlab.onelab.info/gmsh/gmsh/-/wikis/Gmsh-compilation
I think it's reasonable to compile support for it by default.
---
srcpkgs/gmsh/template | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/gmsh/template b/srcpkgs/gmsh/template
index 0a499e40b139..616e140277b1 100644
--- a/srcpkgs/gmsh/template
+++ b/srcpkgs/gmsh/template
@@ -1,13 +1,13 @@
# Template file for 'gmsh'
pkgname=gmsh
-version=4.7.1
+version=4.8.4
revision=1
wrksrc="${pkgname}-${version}-source"
build_style=cmake
configure_args="-DENABLE_SYSTEM_CONTRIB=ON
-DENABLE_HXT=$(vopt_if hxt ON OFF)
-DENABLE_ZIPPER=$(vopt_if zipper ON OFF)"
-makedepends="freetype-devel glu-devel gmp-devel
+makedepends="freetype-devel glu-devel gmp-devel $(vopt_if occt occt-devel)
$(vopt_if fltk fltk-devel) blas-devel lapack-devel"
short_desc="Three-dimensional finite element mesh generator"
maintainer="Nathan Owens <ndowens@artixlinux.org>"
@@ -15,13 +15,14 @@ license="GPL-2.0-or-later"
homepage="https://gmsh.info"
changelog="http://gmsh.info/CHANGELOG.txt"
distfiles="https://gmsh.info/src/gmsh-${version}-source.tgz"
-checksum=c984c295116c757ed165d77149bd5fdd1068cbd7835e9bcd077358b503891c6a
+checksum=760dbdc072eaa3c82d066c5ba3b06eacdd3304eb2a97373fe4ada9509f0b6ace
-build_options="fltk hxt zipper"
-build_options_default="hxt"
+build_options="fltk occt hxt zipper"
+build_options_default="hxt occt"
desc_option_hxt="Enable HXT library"
desc_option_fltk="Enable FLTK GUI support"
+desc_option_occt="Enable OpenCASCADE support"
desc_option_zipper="Enable zip file compression/decompression"
CFLAGS="-fcommon"
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gmsh: Added occt and version bump
2021-07-10 11:20 [PR PATCH] Added occt and version bump foopub
2021-07-10 12:45 ` gmsh: " ericonr
2021-07-10 14:21 ` [PR PATCH] [Updated] " foopub
@ 2021-07-10 14:22 ` foopub
2021-07-12 6:14 ` [PR PATCH] [Updated] " ericonr
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: foopub @ 2021-07-10 14:22 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 144 bytes --]
New comment by foopub on void-packages repository
https://github.com/void-linux/void-packages/pull/31884#issuecomment-877645847
Comment:
Done
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PR PATCH] [Updated] gmsh: Added occt and version bump
2021-07-10 11:20 [PR PATCH] Added occt and version bump foopub
` (2 preceding siblings ...)
2021-07-10 14:22 ` foopub
@ 2021-07-12 6:14 ` ericonr
2021-07-12 6:14 ` ericonr
2021-07-12 6:14 ` [PR PATCH] [Merged]: " ericonr
5 siblings, 0 replies; 7+ messages in thread
From: ericonr @ 2021-07-12 6:14 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1841 bytes --]
There is an updated pull request by ericonr against master on the void-packages repository
https://github.com/foopub/void-packages master
https://github.com/void-linux/void-packages/pull/31884
gmsh: Added occt and version bump
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
OpenCASCADE is needed for a lot of the functionality of gmsh, and it's suggested as one of the dependencies here: https://gitlab.onelab.info/gmsh/gmsh/-/wikis/Gmsh-compilation
I think it's reasonable to compile support for it by default.
A patch file from https://github.com/void-linux/void-packages/pull/31884.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-master-31884.patch --]
[-- Type: text/x-diff, Size: 1886 bytes --]
From 316225de9ccc85fe8a1b5e325ac0ee8e3547c4cb Mon Sep 17 00:00:00 2001
From: foo <krowlaxs@gmail.com>
Date: Sat, 10 Jul 2021 12:01:51 +0100
Subject: [PATCH] gmsh: update to 4.8.4
OpenCASCADE is needed for a lot of the functionality of gmsh (i.e. in
FreeCAD), and it's suggested as one of the dependencies here:
https://gitlab.onelab.info/gmsh/gmsh/-/wikis/Gmsh-compilation
---
srcpkgs/gmsh/template | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/gmsh/template b/srcpkgs/gmsh/template
index 0a499e40b139..616e140277b1 100644
--- a/srcpkgs/gmsh/template
+++ b/srcpkgs/gmsh/template
@@ -1,13 +1,13 @@
# Template file for 'gmsh'
pkgname=gmsh
-version=4.7.1
+version=4.8.4
revision=1
wrksrc="${pkgname}-${version}-source"
build_style=cmake
configure_args="-DENABLE_SYSTEM_CONTRIB=ON
-DENABLE_HXT=$(vopt_if hxt ON OFF)
-DENABLE_ZIPPER=$(vopt_if zipper ON OFF)"
-makedepends="freetype-devel glu-devel gmp-devel
+makedepends="freetype-devel glu-devel gmp-devel $(vopt_if occt occt-devel)
$(vopt_if fltk fltk-devel) blas-devel lapack-devel"
short_desc="Three-dimensional finite element mesh generator"
maintainer="Nathan Owens <ndowens@artixlinux.org>"
@@ -15,13 +15,14 @@ license="GPL-2.0-or-later"
homepage="https://gmsh.info"
changelog="http://gmsh.info/CHANGELOG.txt"
distfiles="https://gmsh.info/src/gmsh-${version}-source.tgz"
-checksum=c984c295116c757ed165d77149bd5fdd1068cbd7835e9bcd077358b503891c6a
+checksum=760dbdc072eaa3c82d066c5ba3b06eacdd3304eb2a97373fe4ada9509f0b6ace
-build_options="fltk hxt zipper"
-build_options_default="hxt"
+build_options="fltk occt hxt zipper"
+build_options_default="hxt occt"
desc_option_hxt="Enable HXT library"
desc_option_fltk="Enable FLTK GUI support"
+desc_option_occt="Enable OpenCASCADE support"
desc_option_zipper="Enable zip file compression/decompression"
CFLAGS="-fcommon"
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gmsh: Added occt and version bump
2021-07-10 11:20 [PR PATCH] Added occt and version bump foopub
` (3 preceding siblings ...)
2021-07-12 6:14 ` [PR PATCH] [Updated] " ericonr
@ 2021-07-12 6:14 ` ericonr
2021-07-12 6:14 ` [PR PATCH] [Merged]: " ericonr
5 siblings, 0 replies; 7+ messages in thread
From: ericonr @ 2021-07-12 6:14 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 193 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/31884#issuecomment-878002763
Comment:
I fixed the commit message and merged, thanks a lot!
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PR PATCH] [Merged]: gmsh: Added occt and version bump
2021-07-10 11:20 [PR PATCH] Added occt and version bump foopub
` (4 preceding siblings ...)
2021-07-12 6:14 ` ericonr
@ 2021-07-12 6:14 ` ericonr
5 siblings, 0 replies; 7+ messages in thread
From: ericonr @ 2021-07-12 6:14 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1687 bytes --]
There's a merged pull request on the void-packages repository
gmsh: Added occt and version bump
https://github.com/void-linux/void-packages/pull/31884
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
OpenCASCADE is needed for a lot of the functionality of gmsh, and it's suggested as one of the dependencies here: https://gitlab.onelab.info/gmsh/gmsh/-/wikis/Gmsh-compilation
I think it's reasonable to compile support for it by default.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-07-12 6:14 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-10 11:20 [PR PATCH] Added occt and version bump foopub
2021-07-10 12:45 ` gmsh: " ericonr
2021-07-10 14:21 ` [PR PATCH] [Updated] " foopub
2021-07-10 14:22 ` foopub
2021-07-12 6:14 ` [PR PATCH] [Updated] " ericonr
2021-07-12 6:14 ` ericonr
2021-07-12 6:14 ` [PR PATCH] [Merged]: " ericonr
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).