* [PR PATCH] New packages: python3-openpyxl-3.0.7, python3-et-xmlfile-1.1, python3…
@ 2021-09-05 16:11 mrkcee
2021-09-06 11:34 ` [PR PATCH] [Updated] " mrkcee
0 siblings, 1 reply; 2+ messages in thread
From: mrkcee @ 2021-09-05 16:11 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1624 bytes --]
There is a new pull request by mrkcee against master on the void-packages repository
https://github.com/mrkcee/void-packages openpyxl
https://github.com/void-linux/void-packages/pull/32846
New packages: python3-openpyxl-3.0.7, python3-et-xmlfile-1.1, python3…
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (x86_64-glibc)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
A patch file from https://github.com/void-linux/void-packages/pull/32846.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-openpyxl-32846.patch --]
[-- Type: text/x-diff, Size: 3082 bytes --]
From 901c7c65e3563ef059b69fda2a4c379496bfdafd Mon Sep 17 00:00:00 2001
From: mrkcee <mrkcee@protonmail.com>
Date: Mon, 6 Sep 2021 00:06:18 +0800
Subject: [PATCH] New packages: python3-openpyxl-3.0.7, python3-et-xmlfile-1.1,
python3-jdcal-1.4.1
---
srcpkgs/python3-et-xmlfile/template | 18 ++++++++++++++++++
srcpkgs/python3-jdcal/template | 17 +++++++++++++++++
srcpkgs/python3-openpyxl/template | 18 ++++++++++++++++++
3 files changed, 53 insertions(+)
create mode 100644 srcpkgs/python3-et-xmlfile/template
create mode 100644 srcpkgs/python3-jdcal/template
create mode 100644 srcpkgs/python3-openpyxl/template
diff --git a/srcpkgs/python3-et-xmlfile/template b/srcpkgs/python3-et-xmlfile/template
new file mode 100644
index 000000000000..658961fa8494
--- /dev/null
+++ b/srcpkgs/python3-et-xmlfile/template
@@ -0,0 +1,18 @@
+# Template file for 'python3-et-xmlfile'
+pkgname=python3-et-xmlfile
+version=1.1
+revision=1
+wrksrc=et_xmlfile-$version
+build_style=python3-module
+hostmakedepends="python3 python3-setuptools"
+makedepends="python3-lxml python3-pytest"
+short_desc="Low memory library for creating large XML files"
+maintainer="mrkcee <mrkcee@protonmail.com>"
+license="MIT"
+homepage="https://foss.heptapod.net/openpyxl/et_xmlfile"
+distfiles="${homepage}/-/archive/1.1/et_xmlfile-${version}.tar.gz"
+checksum=3d3486a2ef43dc099d7b64cb247f1a9595edd39225e4398b6538d55ce1f8a36b
+
+post_install() {
+ vlicense LICENCE.rst
+}
diff --git a/srcpkgs/python3-jdcal/template b/srcpkgs/python3-jdcal/template
new file mode 100644
index 000000000000..b0c6161ec05b
--- /dev/null
+++ b/srcpkgs/python3-jdcal/template
@@ -0,0 +1,17 @@
+# Template file for 'python3-jdcal'
+pkgname=python3-jdcal
+version=1.4.1
+revision=1
+wrksrc="${pkgname#python3-}-$version"
+build_style=python3-module
+hostmakedepends="python3 python3-setuptools"
+short_desc="Julian dates from proleptic Gregorian and Julian calendars"
+maintainer="mrkcee <mrkcee@protonmail.com>"
+license="BSD-2-Clause"
+homepage="https://github.com/phn/jdcal"
+distfiles="${homepage}/archive/refs/tags/v${version}.tar.gz"
+checksum=6cb87959fb9293bdd577967419af735a1a0aee3ce778c443acb219b2668c6597
+
+post_install() {
+ vlicense LICENSE.txt
+}
diff --git a/srcpkgs/python3-openpyxl/template b/srcpkgs/python3-openpyxl/template
new file mode 100644
index 000000000000..a71aa0e44336
--- /dev/null
+++ b/srcpkgs/python3-openpyxl/template
@@ -0,0 +1,18 @@
+# Template file for 'python3-openpyxl'
+pkgname=python3-openpyxl
+version=3.0.7
+revision=1
+wrksrc="${pkgname#python3-}-${version}"
+build_style=python3-module
+hostmakedepends="python3 python3-setuptools"
+depends="python3-Pillow python3-et-xmlfile python3-jdcal"
+short_desc="Python library to read/write Excel 2010 xlsx/xlsm/xltx/xltm files"
+maintainer="mrkcee <mrkcee@protonmail.com>"
+license="MIT"
+homepage="https://foss.heptapod.net/openpyxl/openpyxl"
+distfiles="${homepage}/-/archive/${version}/openpyxl-${version}.tar.gz"
+checksum=9e4d563e98ce4b0f64beb7de29a9a4ddeac6c5aaf13bfef105c89611daae7b0f
+
+post_install() {
+ vlicense LICENCE.rst
+}
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PR PATCH] [Updated] New packages: python3-openpyxl-3.0.7, python3-et-xmlfile-1.1, python3…
2021-09-05 16:11 [PR PATCH] New packages: python3-openpyxl-3.0.7, python3-et-xmlfile-1.1, python3… mrkcee
@ 2021-09-06 11:34 ` mrkcee
0 siblings, 0 replies; 2+ messages in thread
From: mrkcee @ 2021-09-06 11:34 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1629 bytes --]
There is an updated pull request by mrkcee against master on the void-packages repository
https://github.com/mrkcee/void-packages openpyxl
https://github.com/void-linux/void-packages/pull/32846
New packages: python3-openpyxl-3.0.7, python3-et-xmlfile-1.1, python3…
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (x86_64-glibc)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
A patch file from https://github.com/void-linux/void-packages/pull/32846.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-openpyxl-32846.patch --]
[-- Type: text/x-diff, Size: 4852 bytes --]
From 901c7c65e3563ef059b69fda2a4c379496bfdafd Mon Sep 17 00:00:00 2001
From: mrkcee <mrkcee@protonmail.com>
Date: Mon, 6 Sep 2021 00:06:18 +0800
Subject: [PATCH 1/2] New packages: python3-openpyxl-3.0.7,
python3-et-xmlfile-1.1, python3-jdcal-1.4.1
---
srcpkgs/python3-et-xmlfile/template | 18 ++++++++++++++++++
srcpkgs/python3-jdcal/template | 17 +++++++++++++++++
srcpkgs/python3-openpyxl/template | 18 ++++++++++++++++++
3 files changed, 53 insertions(+)
create mode 100644 srcpkgs/python3-et-xmlfile/template
create mode 100644 srcpkgs/python3-jdcal/template
create mode 100644 srcpkgs/python3-openpyxl/template
diff --git a/srcpkgs/python3-et-xmlfile/template b/srcpkgs/python3-et-xmlfile/template
new file mode 100644
index 000000000000..658961fa8494
--- /dev/null
+++ b/srcpkgs/python3-et-xmlfile/template
@@ -0,0 +1,18 @@
+# Template file for 'python3-et-xmlfile'
+pkgname=python3-et-xmlfile
+version=1.1
+revision=1
+wrksrc=et_xmlfile-$version
+build_style=python3-module
+hostmakedepends="python3 python3-setuptools"
+makedepends="python3-lxml python3-pytest"
+short_desc="Low memory library for creating large XML files"
+maintainer="mrkcee <mrkcee@protonmail.com>"
+license="MIT"
+homepage="https://foss.heptapod.net/openpyxl/et_xmlfile"
+distfiles="${homepage}/-/archive/1.1/et_xmlfile-${version}.tar.gz"
+checksum=3d3486a2ef43dc099d7b64cb247f1a9595edd39225e4398b6538d55ce1f8a36b
+
+post_install() {
+ vlicense LICENCE.rst
+}
diff --git a/srcpkgs/python3-jdcal/template b/srcpkgs/python3-jdcal/template
new file mode 100644
index 000000000000..b0c6161ec05b
--- /dev/null
+++ b/srcpkgs/python3-jdcal/template
@@ -0,0 +1,17 @@
+# Template file for 'python3-jdcal'
+pkgname=python3-jdcal
+version=1.4.1
+revision=1
+wrksrc="${pkgname#python3-}-$version"
+build_style=python3-module
+hostmakedepends="python3 python3-setuptools"
+short_desc="Julian dates from proleptic Gregorian and Julian calendars"
+maintainer="mrkcee <mrkcee@protonmail.com>"
+license="BSD-2-Clause"
+homepage="https://github.com/phn/jdcal"
+distfiles="${homepage}/archive/refs/tags/v${version}.tar.gz"
+checksum=6cb87959fb9293bdd577967419af735a1a0aee3ce778c443acb219b2668c6597
+
+post_install() {
+ vlicense LICENSE.txt
+}
diff --git a/srcpkgs/python3-openpyxl/template b/srcpkgs/python3-openpyxl/template
new file mode 100644
index 000000000000..a71aa0e44336
--- /dev/null
+++ b/srcpkgs/python3-openpyxl/template
@@ -0,0 +1,18 @@
+# Template file for 'python3-openpyxl'
+pkgname=python3-openpyxl
+version=3.0.7
+revision=1
+wrksrc="${pkgname#python3-}-${version}"
+build_style=python3-module
+hostmakedepends="python3 python3-setuptools"
+depends="python3-Pillow python3-et-xmlfile python3-jdcal"
+short_desc="Python library to read/write Excel 2010 xlsx/xlsm/xltx/xltm files"
+maintainer="mrkcee <mrkcee@protonmail.com>"
+license="MIT"
+homepage="https://foss.heptapod.net/openpyxl/openpyxl"
+distfiles="${homepage}/-/archive/${version}/openpyxl-${version}.tar.gz"
+checksum=9e4d563e98ce4b0f64beb7de29a9a4ddeac6c5aaf13bfef105c89611daae7b0f
+
+post_install() {
+ vlicense LICENCE.rst
+}
From 6d25705b6c54e5d2dd742bbae017e9438719a13b Mon Sep 17 00:00:00 2001
From: mrkcee <mrkcee@protonmail.com>
Date: Mon, 6 Sep 2021 19:34:10 +0800
Subject: [PATCH 2/2] Removed python3-jdcal dependency
---
srcpkgs/python3-jdcal/template | 17 -----------------
srcpkgs/python3-openpyxl/template | 2 +-
2 files changed, 1 insertion(+), 18 deletions(-)
delete mode 100644 srcpkgs/python3-jdcal/template
diff --git a/srcpkgs/python3-jdcal/template b/srcpkgs/python3-jdcal/template
deleted file mode 100644
index b0c6161ec05b..000000000000
--- a/srcpkgs/python3-jdcal/template
+++ /dev/null
@@ -1,17 +0,0 @@
-# Template file for 'python3-jdcal'
-pkgname=python3-jdcal
-version=1.4.1
-revision=1
-wrksrc="${pkgname#python3-}-$version"
-build_style=python3-module
-hostmakedepends="python3 python3-setuptools"
-short_desc="Julian dates from proleptic Gregorian and Julian calendars"
-maintainer="mrkcee <mrkcee@protonmail.com>"
-license="BSD-2-Clause"
-homepage="https://github.com/phn/jdcal"
-distfiles="${homepage}/archive/refs/tags/v${version}.tar.gz"
-checksum=6cb87959fb9293bdd577967419af735a1a0aee3ce778c443acb219b2668c6597
-
-post_install() {
- vlicense LICENSE.txt
-}
diff --git a/srcpkgs/python3-openpyxl/template b/srcpkgs/python3-openpyxl/template
index a71aa0e44336..c1f3a3a02de1 100644
--- a/srcpkgs/python3-openpyxl/template
+++ b/srcpkgs/python3-openpyxl/template
@@ -5,7 +5,7 @@ revision=1
wrksrc="${pkgname#python3-}-${version}"
build_style=python3-module
hostmakedepends="python3 python3-setuptools"
-depends="python3-Pillow python3-et-xmlfile python3-jdcal"
+depends="python3-Pillow python3-et-xmlfile"
short_desc="Python library to read/write Excel 2010 xlsx/xlsm/xltx/xltm files"
maintainer="mrkcee <mrkcee@protonmail.com>"
license="MIT"
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-09-06 11:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-05 16:11 [PR PATCH] New packages: python3-openpyxl-3.0.7, python3-et-xmlfile-1.1, python3… mrkcee
2021-09-06 11:34 ` [PR PATCH] [Updated] " mrkcee
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).