* [PR PATCH] hexchat: update to 2.16.0 and maintainer change
@ 2021-10-02 20:43 0x5c
2021-10-02 21:01 ` [PR PATCH] [Updated] " 0x5c
2021-10-03 3:46 ` [PR PATCH] [Merged]: " Vaelatern
0 siblings, 2 replies; 3+ messages in thread
From: 0x5c @ 2021-10-02 20:43 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2217 bytes --]
There is a new pull request by 0x5c against master on the void-packages repository
https://github.com/0x5c/void-packages hexchat
https://github.com/void-linux/void-packages/pull/33273
hexchat: update to 2.16.0 and maintainer change
- Remove obsolete [host]makedep 'libxml2-devel' as hexchat does not use libxml2
- Add makedep 'python3-cffi'
- Add hostmakedep 'python3-cffi' for crossbuilds
- Update configure args for dbus and tls (upstream renamed them)
- Remove configure args for building the text interface (now disabled by default by upstream)
- Add configure arg for libcanbera
- Remove patch for cross compile (introduced in 32a4badf)
The file it applies to is now unrecognisable, and the patch *seems* unneeded
- Change the maintainer from Orphan
- Remove obsolete 'update' file (project has moved to github releases)
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/33273.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hexchat-33273.patch --]
[-- Type: text/x-diff, Size: 6147 bytes --]
From a9a8a80c9a1b23809d121ba95b9d45fc3b3bce08 Mon Sep 17 00:00:00 2001
From: 0x5c <dev@0x5c.io>
Date: Sat, 2 Oct 2021 16:31:29 -0400
Subject: [PATCH] hexchat: update to 2.16.0 and maintainer change
- Remove obsolete [host]makedep 'libxml2-devel' as hexchat does not use libxml2
- Add makedep 'python3-cffi'
- Add hostmakedep 'python3-cffi' for crossbuilds
- Update configure args for dbus and tls (upstream renamed them)
- Remove configure args for building the text interface (now disabled by default by upstream)
- Add configure arg for libcanbera
- Remove patch for cross compile (introduced in 32a4badf)
The file it applies to is now unrecognisable, and the patch *seems* unneeded
- Change the maintainer from Orphan
- Remove obsolete 'update' file (project has moved to github releases)
---
srcpkgs/hexchat/changelog-DNC | 12 ++++++++++++
srcpkgs/hexchat/depchanges-DNC | 3 +++
srcpkgs/hexchat/newflags-DNC | 17 +++++++++++++++++
srcpkgs/hexchat/patches/perl-link.patch | 20 --------------------
srcpkgs/hexchat/template | 20 ++++++++++----------
srcpkgs/hexchat/update | 2 --
6 files changed, 42 insertions(+), 32 deletions(-)
create mode 100644 srcpkgs/hexchat/changelog-DNC
create mode 100644 srcpkgs/hexchat/depchanges-DNC
create mode 100644 srcpkgs/hexchat/newflags-DNC
delete mode 100644 srcpkgs/hexchat/patches/perl-link.patch
delete mode 100644 srcpkgs/hexchat/update
diff --git a/srcpkgs/hexchat/changelog-DNC b/srcpkgs/hexchat/changelog-DNC
new file mode 100644
index 000000000000..76312d3a89b7
--- /dev/null
+++ b/srcpkgs/hexchat/changelog-DNC
@@ -0,0 +1,12 @@
+- Remove obsolete [host]makedep 'libxml2-devel' as hexchat does not use libxml2
+- Add makedep 'python3-cffi'
+- Add hostmakedep 'python3-cffi' for crossbuilds
+- Update configure args for dbus and tls (upstream renamed them)
+- Remove configure args for building the text interface (now disabled by default by upstream)
+- Add configure arg for libcanbera
+- Remove patch for cross compile (introduced in 32a4badf)
+ The file it applies to is now unrecognisable, and the patch *seems* unneeded
+
+- Change the maintainer from Orphan
+
+- Remove obsolete 'update' file (project has moved to github releases)
diff --git a/srcpkgs/hexchat/depchanges-DNC b/srcpkgs/hexchat/depchanges-DNC
new file mode 100644
index 000000000000..3da286a3089e
--- /dev/null
+++ b/srcpkgs/hexchat/depchanges-DNC
@@ -0,0 +1,3 @@
+makedeps:
+X libxml2-devel
++ python3-cffi
diff --git a/srcpkgs/hexchat/newflags-DNC b/srcpkgs/hexchat/newflags-DNC
new file mode 100644
index 000000000000..9e118e0c22a2
--- /dev/null
+++ b/srcpkgs/hexchat/newflags-DNC
@@ -0,0 +1,17 @@
+-Ddbus=enabled <- -Dwith-dbus=true
+? -Dtls=enabled <- -Dwith-ssl=true
+X -Dwith-text=false
+? -Dwith-perl=perl <- -Dwith-perl=/usr/bin/perl
+-Dwith-python=python3
+-Dwith-lua=$(vopt_if LuaJIT luajit lua)
+
+new?
+
+-Dlibcanberra=enabled
+-Dtheme-manager=true
+
+
+for backup:
+configure_args="-Dwith-dbus=true -Dwith-ssl=true -Dwith-text=false
+ -Dwith-perl=/usr/bin/perl -Dwith-python=python3
+ -Dwith-lua=$(vopt_if LuaJIT luajit lua)"
diff --git a/srcpkgs/hexchat/patches/perl-link.patch b/srcpkgs/hexchat/patches/perl-link.patch
deleted file mode 100644
index 66390dedd5f4..000000000000
--- a/srcpkgs/hexchat/patches/perl-link.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/plugins/perl/meson.build 2018-08-15 13:30:17.108881970 +0200
-+++ b/plugins/perl/meson.build 2018-08-15 13:30:36.682882751 +0200
-@@ -39,7 +39,7 @@
- perl_ldflags = []
- perl_rpath = ''
- foreach flag : ret.stdout().strip().split(' ')
-- if flag.startswith('-L') or flag.startswith('-l')
-+ if flag.startswith('-l')
- perl_ldflags += flag
- endif
- if flag.startswith('-Wl,-rpath,')
-@@ -52,6 +52,8 @@
- endif
- endforeach
-
-+perl_ldflags += '-L${XBPS_CROSS_BASE}/usr/lib/perl5/core_perl/CORE'
-+
- perl_cflags += [
- # Perl has its own 'config.h' that we must override
- # TODO: Just rename ours to something more unique.
diff --git a/srcpkgs/hexchat/template b/srcpkgs/hexchat/template
index 8bd4b443f7d9..f2e356f54736 100644
--- a/srcpkgs/hexchat/template
+++ b/srcpkgs/hexchat/template
@@ -1,23 +1,23 @@
# Template file for 'hexchat'
pkgname=hexchat
-version=2.14.3
-revision=6
+version=2.16.0
+revision=1
build_style=meson
-configure_args="-Dwith-dbus=true -Dwith-ssl=true -Dwith-text=false
+configure_args="-Ddbus=enabled -Dtls=enabled -Dwith-text=false
-Dwith-perl=/usr/bin/perl -Dwith-python=python3
- -Dwith-lua=$(vopt_if LuaJIT luajit lua)"
+ -Dwith-lua=$(vopt_if LuaJIT luajit lua) -Dlibcanberra=enabled"
hostmakedepends="gettext pkg-config glib-devel"
makedepends="gtk+-devel openssl-devel dbus-glib-devel perl libnotify-devel
- libcanberra-devel libxml2-devel pciutils-devel libproxy-devel
- iso-codes python3-devel $(vopt_if LuaJIT LuaJIT-devel lua53-devel)"
+ libcanberra-devel pciutils-devel libproxy-devel iso-codes
+ python3-devel python3-cffi $(vopt_if LuaJIT LuaJIT-devel lua53-devel)"
depends="desktop-file-utils enchant2"
short_desc="GTK+ based IRC client successor of Xchat"
-maintainer="Orphaned <orphan@voidlinux.org>"
+maintainer="0x5c <dev@0x5c.io>"
license="GPL-2.0-or-later"
homepage="https://hexchat.github.io/"
changelog="https://hexchat.readthedocs.org/en/latest/changelog.html"
-distfiles="https://dl.hexchat.net/hexchat/${pkgname}-${version}.tar.xz"
-checksum=901a9d13db5a4da69b827f6093306bbd16863dc49016f7668bd3e4506512e882
+distfiles="https://github.com/hexchat/hexchat/archive/v${version}.tar.gz"
+checksum=5c7f35317bb3bc437fc5fb57392ddc13ba11c173718cdfe4de89d69c30a40b06
build_options="LuaJIT"
lib32disabled=yes
@@ -27,7 +27,7 @@ case "$XBPS_TARGET_MACHINE" in
esac
if [ "$CROSS_BUILD" ]; then
- hostmakedepends+=" dbus-glib-devel libxml2-devel gdk-pixbuf perl
+ hostmakedepends+=" dbus-glib-devel python3-cffi gdk-pixbuf perl
shared-mime-info"
fi
diff --git a/srcpkgs/hexchat/update b/srcpkgs/hexchat/update
deleted file mode 100644
index c2af9761bb72..000000000000
--- a/srcpkgs/hexchat/update
+++ /dev/null
@@ -1,2 +0,0 @@
-pkgname=HexChat
-site=https://dl.hexchat.net/hexchat/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PR PATCH] [Updated] hexchat: update to 2.16.0 and maintainer change
2021-10-02 20:43 [PR PATCH] hexchat: update to 2.16.0 and maintainer change 0x5c
@ 2021-10-02 21:01 ` 0x5c
2021-10-03 3:46 ` [PR PATCH] [Merged]: " Vaelatern
1 sibling, 0 replies; 3+ messages in thread
From: 0x5c @ 2021-10-02 21:01 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2222 bytes --]
There is an updated pull request by 0x5c against master on the void-packages repository
https://github.com/0x5c/void-packages hexchat
https://github.com/void-linux/void-packages/pull/33273
hexchat: update to 2.16.0 and maintainer change
- Remove obsolete [host]makedep 'libxml2-devel' as hexchat does not use libxml2
- Add makedep 'python3-cffi'
- Add hostmakedep 'python3-cffi' for crossbuilds
- Update configure args for dbus and tls (upstream renamed them)
- Remove configure args for building the text interface (now disabled by default by upstream)
- Add configure arg for libcanbera
- Remove patch for cross compile (introduced in 32a4badf)
The file it applies to is now unrecognisable, and the patch *seems* unneeded
- Change the maintainer from Orphan
- Remove obsolete 'update' file (project has moved to github releases)
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/33273.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-hexchat-33273.patch --]
[-- Type: text/x-diff, Size: 4154 bytes --]
From cc4ef094ad530a96015c9585d3beda1fb2696455 Mon Sep 17 00:00:00 2001
From: 0x5c <dev@0x5c.io>
Date: Sat, 2 Oct 2021 16:58:59 -0400
Subject: [PATCH] hexchat: update to 2.16.0 and change maintainer
- Remove obsolete [host]makedep 'libxml2-devel'
as hexchat does not use libxml2
- Add makedep 'python3-cffi'
- Add hostmakedep 'python3-cffi' for crossbuilds
- Update configure args for dbus and tls (upstream renamed them)
- Remove configure args for building the text interface
(now disabled by default by upstream)
- Add configure arg for libcanbera
- Remove patch for cross compile (introduced in 32a4badf)
The file it applies to is now unrecognisable,
and the patch *seems* unneeded
- Change the maintainer from Orphan
- Remove obsolete 'update' file (project has moved to github releases)
---
srcpkgs/hexchat/patches/perl-link.patch | 20 --------------------
srcpkgs/hexchat/template | 20 ++++++++++----------
srcpkgs/hexchat/update | 2 --
3 files changed, 10 insertions(+), 32 deletions(-)
delete mode 100644 srcpkgs/hexchat/patches/perl-link.patch
delete mode 100644 srcpkgs/hexchat/update
diff --git a/srcpkgs/hexchat/patches/perl-link.patch b/srcpkgs/hexchat/patches/perl-link.patch
deleted file mode 100644
index 66390dedd5f4..000000000000
--- a/srcpkgs/hexchat/patches/perl-link.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/plugins/perl/meson.build 2018-08-15 13:30:17.108881970 +0200
-+++ b/plugins/perl/meson.build 2018-08-15 13:30:36.682882751 +0200
-@@ -39,7 +39,7 @@
- perl_ldflags = []
- perl_rpath = ''
- foreach flag : ret.stdout().strip().split(' ')
-- if flag.startswith('-L') or flag.startswith('-l')
-+ if flag.startswith('-l')
- perl_ldflags += flag
- endif
- if flag.startswith('-Wl,-rpath,')
-@@ -52,6 +52,8 @@
- endif
- endforeach
-
-+perl_ldflags += '-L${XBPS_CROSS_BASE}/usr/lib/perl5/core_perl/CORE'
-+
- perl_cflags += [
- # Perl has its own 'config.h' that we must override
- # TODO: Just rename ours to something more unique.
diff --git a/srcpkgs/hexchat/template b/srcpkgs/hexchat/template
index 8bd4b443f7d9..f2e356f54736 100644
--- a/srcpkgs/hexchat/template
+++ b/srcpkgs/hexchat/template
@@ -1,23 +1,23 @@
# Template file for 'hexchat'
pkgname=hexchat
-version=2.14.3
-revision=6
+version=2.16.0
+revision=1
build_style=meson
-configure_args="-Dwith-dbus=true -Dwith-ssl=true -Dwith-text=false
+configure_args="-Ddbus=enabled -Dtls=enabled -Dwith-text=false
-Dwith-perl=/usr/bin/perl -Dwith-python=python3
- -Dwith-lua=$(vopt_if LuaJIT luajit lua)"
+ -Dwith-lua=$(vopt_if LuaJIT luajit lua) -Dlibcanberra=enabled"
hostmakedepends="gettext pkg-config glib-devel"
makedepends="gtk+-devel openssl-devel dbus-glib-devel perl libnotify-devel
- libcanberra-devel libxml2-devel pciutils-devel libproxy-devel
- iso-codes python3-devel $(vopt_if LuaJIT LuaJIT-devel lua53-devel)"
+ libcanberra-devel pciutils-devel libproxy-devel iso-codes
+ python3-devel python3-cffi $(vopt_if LuaJIT LuaJIT-devel lua53-devel)"
depends="desktop-file-utils enchant2"
short_desc="GTK+ based IRC client successor of Xchat"
-maintainer="Orphaned <orphan@voidlinux.org>"
+maintainer="0x5c <dev@0x5c.io>"
license="GPL-2.0-or-later"
homepage="https://hexchat.github.io/"
changelog="https://hexchat.readthedocs.org/en/latest/changelog.html"
-distfiles="https://dl.hexchat.net/hexchat/${pkgname}-${version}.tar.xz"
-checksum=901a9d13db5a4da69b827f6093306bbd16863dc49016f7668bd3e4506512e882
+distfiles="https://github.com/hexchat/hexchat/archive/v${version}.tar.gz"
+checksum=5c7f35317bb3bc437fc5fb57392ddc13ba11c173718cdfe4de89d69c30a40b06
build_options="LuaJIT"
lib32disabled=yes
@@ -27,7 +27,7 @@ case "$XBPS_TARGET_MACHINE" in
esac
if [ "$CROSS_BUILD" ]; then
- hostmakedepends+=" dbus-glib-devel libxml2-devel gdk-pixbuf perl
+ hostmakedepends+=" dbus-glib-devel python3-cffi gdk-pixbuf perl
shared-mime-info"
fi
diff --git a/srcpkgs/hexchat/update b/srcpkgs/hexchat/update
deleted file mode 100644
index c2af9761bb72..000000000000
--- a/srcpkgs/hexchat/update
+++ /dev/null
@@ -1,2 +0,0 @@
-pkgname=HexChat
-site=https://dl.hexchat.net/hexchat/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PR PATCH] [Merged]: hexchat: update to 2.16.0 and maintainer change
2021-10-02 20:43 [PR PATCH] hexchat: update to 2.16.0 and maintainer change 0x5c
2021-10-02 21:01 ` [PR PATCH] [Updated] " 0x5c
@ 2021-10-03 3:46 ` Vaelatern
1 sibling, 0 replies; 3+ messages in thread
From: Vaelatern @ 2021-10-03 3:46 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2072 bytes --]
There's a merged pull request on the void-packages repository
hexchat: update to 2.16.0 and maintainer change
https://github.com/void-linux/void-packages/pull/33273
Description:
- Remove obsolete [host]makedep 'libxml2-devel' as hexchat does not use libxml2
- Add makedep 'python3-cffi'
- Add hostmakedep 'python3-cffi' for crossbuilds
- Update configure args for dbus and tls (upstream renamed them)
- Remove configure args for building the text interface (now disabled by default by upstream)
- Add configure arg for libcanbera
- Remove patch for cross compile (introduced in 32a4badf)
The file it applies to is now unrecognisable, and the patch *seems* unneeded
- Change the maintainer from Orphan
- Remove obsolete 'update' file (project has moved to github releases)
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-10-03 3:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-02 20:43 [PR PATCH] hexchat: update to 2.16.0 and maintainer change 0x5c
2021-10-02 21:01 ` [PR PATCH] [Updated] " 0x5c
2021-10-03 3:46 ` [PR PATCH] [Merged]: " Vaelatern
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).