[PR PATCH] chezmoi: update to 2.6.0, enable cgo.

[PR PATCH] chezmoi: update to 2.6.0, enable cgo.

[classabbyamp]

[-- Attachment #1: Type: text/plain, Size: 2225 bytes --]

There is a new pull request by classabbyamp against master on the void-packages repository

https://github.com/classabbyamp/void-packages chezmoi-2.6.0
https://github.com/void-linux/void-packages/pull/33298

chezmoi: update to 2.6.0, enable cgo.
> `$DATE` should be the date of the build in RFC3339 format, e.g. `2019-11-23T18:29:25Z`. The command `date -u +%Y-%m-%dT%H:%M:%SZ` will return a suitable value.

Added the `-X main.date=$DATE` ldflag based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

> Please enable cgo, if possible. chezmoi can be built and run without cgo, but the `.chezmoi.username` and `.chezmoi.group` template variables may not be set correctly on some systems.

Enabled cgo based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33298.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-chezmoi-2.6.0-33298.patch --]
[-- Type: text/x-diff, Size: 1397 bytes --]

From f1fd3720dc41fc267e91eae2f25b393d5004f10a Mon Sep 17 00:00:00 2001
From: Abigail G <dev@kb6.ee>
Date: Sun, 3 Oct 2021 12:25:20 -0400
Subject: [PATCH] chezmoi: update to 2.6.0, enable cgo.

---
 srcpkgs/chezmoi/template | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/srcpkgs/chezmoi/template b/srcpkgs/chezmoi/template
index 071c5a5a74af..be6623986605 100644
--- a/srcpkgs/chezmoi/template
+++ b/srcpkgs/chezmoi/template
@@ -1,18 +1,21 @@
 # Template file for 'chezmoi'
 pkgname=chezmoi
-version=2.5.1
+version=2.6.0
 revision=1
 build_style=go
 go_import_path="github.com/twpayne/chezmoi/v2"
 go_build_tags="noembeddocs noupgrade"
-go_ldflags="-X main.version=${version} -X main.commit=v${version} -X main.builtBy=xbps
+go_ldflags="-X main.version=${version} -X main.commit=v${version}
+ -X main.date=$(date -u +%Y-%m-%dT%H:%M:%SZ) -X main.builtBy=xbps
  -X github.com/twpayne/chezmoi/cmd.DocsDir=/usr/share/doc/chezmoi"
 short_desc="Manage your dotfiles across multiple machines, securely"
 maintainer="Abigail G <dev@kb6.ee>"
 license="MIT"
 homepage="https://chezmoi.io/"
 distfiles="https://github.com/twpayne/chezmoi/archive/v${version}.tar.gz"
-checksum=94ad37776ec47fd2865f3bcf56a090592e92d56558811d10fb0a331e146b899f
+checksum=e9550626bf30b95f3517e3c4592a25fd2ec1978b5ed0665a4f2b1a42ce4d8dec
+
+export CGO_ENABLED=1
 
 post_install() {
 	vlicense LICENSE

Re: [PR PATCH] [Updated] chezmoi: update to 2.6.0, enable cgo.

[classabbyamp]

[-- Attachment #1: Type: text/plain, Size: 2230 bytes --]

There is an updated pull request by classabbyamp against master on the void-packages repository

https://github.com/classabbyamp/void-packages chezmoi-2.6.0
https://github.com/void-linux/void-packages/pull/33298

chezmoi: update to 2.6.0, enable cgo.
> `$DATE` should be the date of the build in RFC3339 format, e.g. `2019-11-23T18:29:25Z`. The command `date -u +%Y-%m-%dT%H:%M:%SZ` will return a suitable value.

Added the `-X main.date=$DATE` ldflag based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

> Please enable cgo, if possible. chezmoi can be built and run without cgo, but the `.chezmoi.username` and `.chezmoi.group` template variables may not be set correctly on some systems.

Enabled cgo based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33298.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-chezmoi-2.6.0-33298.patch --]
[-- Type: text/x-diff, Size: 1397 bytes --]

From e4ad1f0d442f8388d060a0f2b643ab63f105f5f3 Mon Sep 17 00:00:00 2001
From: Abigail G <dev@kb6.ee>
Date: Sun, 3 Oct 2021 12:25:20 -0400
Subject: [PATCH] chezmoi: update to 2.6.1, enable cgo.

---
 srcpkgs/chezmoi/template | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/srcpkgs/chezmoi/template b/srcpkgs/chezmoi/template
index 071c5a5a74af..ed94487b6f46 100644
--- a/srcpkgs/chezmoi/template
+++ b/srcpkgs/chezmoi/template
@@ -1,18 +1,21 @@
 # Template file for 'chezmoi'
 pkgname=chezmoi
-version=2.5.1
+version=2.6.1
 revision=1
 build_style=go
 go_import_path="github.com/twpayne/chezmoi/v2"
 go_build_tags="noembeddocs noupgrade"
-go_ldflags="-X main.version=${version} -X main.commit=v${version} -X main.builtBy=xbps
+go_ldflags="-X main.version=${version} -X main.commit=v${version}
+ -X main.date=$(date -u +%Y-%m-%dT%H:%M:%SZ) -X main.builtBy=xbps
  -X github.com/twpayne/chezmoi/cmd.DocsDir=/usr/share/doc/chezmoi"
 short_desc="Manage your dotfiles across multiple machines, securely"
 maintainer="Abigail G <dev@kb6.ee>"
 license="MIT"
 homepage="https://chezmoi.io/"
 distfiles="https://github.com/twpayne/chezmoi/archive/v${version}.tar.gz"
-checksum=94ad37776ec47fd2865f3bcf56a090592e92d56558811d10fb0a331e146b899f
+checksum=9703edbe369a498feb82173bda6400f23b7d1624154f84aa0beccf19462f082f
+
+export CGO_ENABLED=1
 
 post_install() {
 	vlicense LICENSE

Re: chezmoi: update to 2.6.1, enable cgo.

[ericonr]

[-- Attachment #1: Type: text/plain, Size: 447 bytes --]

New comment by ericonr on void-packages repository

https://github.com/void-linux/void-packages/pull/33298#issuecomment-933095314

Comment:
cgo broke rclone on musl, at least. So we need to watch out for that.

I've tested x86_64, armv6l and aarch64 musl, none of the resulting binaries seem to contain text relocations, which musl doesn't support. I'd appreciate if you could document that in the commit message as a point of future reference.

Re: [PR PATCH] [Updated] chezmoi: update to 2.6.1, enable cgo.

[classabbyamp]

[-- Attachment #1: Type: text/plain, Size: 2230 bytes --]

There is an updated pull request by classabbyamp against master on the void-packages repository

https://github.com/classabbyamp/void-packages chezmoi-2.6.0
https://github.com/void-linux/void-packages/pull/33298

chezmoi: update to 2.6.1, enable cgo.
> `$DATE` should be the date of the build in RFC3339 format, e.g. `2019-11-23T18:29:25Z`. The command `date -u +%Y-%m-%dT%H:%M:%SZ` will return a suitable value.

Added the `-X main.date=$DATE` ldflag based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

> Please enable cgo, if possible. chezmoi can be built and run without cgo, but the `.chezmoi.username` and `.chezmoi.group` template variables may not be set correctly on some systems.

Enabled cgo based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33298.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-chezmoi-2.6.0-33298.patch --]
[-- Type: text/x-diff, Size: 1456 bytes --]

From 40b2da813804e530ffc28942b96a9dcdebbd279d Mon Sep 17 00:00:00 2001
From: Abigail G <dev@kb6.ee>
Date: Sun, 3 Oct 2021 12:25:20 -0400
Subject: [PATCH] chezmoi: update to 2.6.1, enable cgo.

Note: if this package breaks on musl, disable cgo for musl
---
 srcpkgs/chezmoi/template | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/srcpkgs/chezmoi/template b/srcpkgs/chezmoi/template
index 071c5a5a74af..ed94487b6f46 100644
--- a/srcpkgs/chezmoi/template
+++ b/srcpkgs/chezmoi/template
@@ -1,18 +1,21 @@
 # Template file for 'chezmoi'
 pkgname=chezmoi
-version=2.5.1
+version=2.6.1
 revision=1
 build_style=go
 go_import_path="github.com/twpayne/chezmoi/v2"
 go_build_tags="noembeddocs noupgrade"
-go_ldflags="-X main.version=${version} -X main.commit=v${version} -X main.builtBy=xbps
+go_ldflags="-X main.version=${version} -X main.commit=v${version}
+ -X main.date=$(date -u +%Y-%m-%dT%H:%M:%SZ) -X main.builtBy=xbps
  -X github.com/twpayne/chezmoi/cmd.DocsDir=/usr/share/doc/chezmoi"
 short_desc="Manage your dotfiles across multiple machines, securely"
 maintainer="Abigail G <dev@kb6.ee>"
 license="MIT"
 homepage="https://chezmoi.io/"
 distfiles="https://github.com/twpayne/chezmoi/archive/v${version}.tar.gz"
-checksum=94ad37776ec47fd2865f3bcf56a090592e92d56558811d10fb0a331e146b899f
+checksum=9703edbe369a498feb82173bda6400f23b7d1624154f84aa0beccf19462f082f
+
+export CGO_ENABLED=1
 
 post_install() {
 	vlicense LICENSE

Re: [PR PATCH] [Updated] chezmoi: update to 2.6.1, enable cgo.

[classabbyamp]

[-- Attachment #1: Type: text/plain, Size: 2230 bytes --]

There is an updated pull request by classabbyamp against master on the void-packages repository

https://github.com/classabbyamp/void-packages chezmoi-2.6.0
https://github.com/void-linux/void-packages/pull/33298

chezmoi: update to 2.6.1, enable cgo.
> `$DATE` should be the date of the build in RFC3339 format, e.g. `2019-11-23T18:29:25Z`. The command `date -u +%Y-%m-%dT%H:%M:%SZ` will return a suitable value.

Added the `-X main.date=$DATE` ldflag based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

> Please enable cgo, if possible. chezmoi can be built and run without cgo, but the `.chezmoi.username` and `.chezmoi.group` template variables may not be set correctly on some systems.

Enabled cgo based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/33298.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-chezmoi-2.6.0-33298.patch --]
[-- Type: text/x-diff, Size: 1493 bytes --]

From 6415c654f0762f31cbe293c0641064cb0dc174af Mon Sep 17 00:00:00 2001
From: Abigail G <dev@kb6.ee>
Date: Sun, 3 Oct 2021 12:25:20 -0400
Subject: [PATCH] chezmoi: update to 2.6.1, enable cgo.

Note: if this package breaks on musl, disable cgo for musl
(see void-linux/void-packages#33298)
---
 srcpkgs/chezmoi/template | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/srcpkgs/chezmoi/template b/srcpkgs/chezmoi/template
index 071c5a5a74af..ed94487b6f46 100644
--- a/srcpkgs/chezmoi/template
+++ b/srcpkgs/chezmoi/template
@@ -1,18 +1,21 @@
 # Template file for 'chezmoi'
 pkgname=chezmoi
-version=2.5.1
+version=2.6.1
 revision=1
 build_style=go
 go_import_path="github.com/twpayne/chezmoi/v2"
 go_build_tags="noembeddocs noupgrade"
-go_ldflags="-X main.version=${version} -X main.commit=v${version} -X main.builtBy=xbps
+go_ldflags="-X main.version=${version} -X main.commit=v${version}
+ -X main.date=$(date -u +%Y-%m-%dT%H:%M:%SZ) -X main.builtBy=xbps
  -X github.com/twpayne/chezmoi/cmd.DocsDir=/usr/share/doc/chezmoi"
 short_desc="Manage your dotfiles across multiple machines, securely"
 maintainer="Abigail G <dev@kb6.ee>"
 license="MIT"
 homepage="https://chezmoi.io/"
 distfiles="https://github.com/twpayne/chezmoi/archive/v${version}.tar.gz"
-checksum=94ad37776ec47fd2865f3bcf56a090592e92d56558811d10fb0a331e146b899f
+checksum=9703edbe369a498feb82173bda6400f23b7d1624154f84aa0beccf19462f082f
+
+export CGO_ENABLED=1
 
 post_install() {
 	vlicense LICENSE

Re: chezmoi: update to 2.6.1, enable cgo.

[classabbyamp]

[-- Attachment #1: Type: text/plain, Size: 166 bytes --]

New comment by classabbyamp on void-packages repository

https://github.com/void-linux/void-packages/pull/33298#issuecomment-933115984

Comment:
@ericonr how's that?

Re: chezmoi: update to 2.6.1, enable cgo.

[ericonr]

[-- Attachment #1: Type: text/plain, Size: 160 bytes --]

New comment by ericonr on void-packages repository

https://github.com/void-linux/void-packages/pull/33298#issuecomment-938648120

Comment:
Looks good, thanks!

Re: [PR PATCH] [Merged]: chezmoi: update to 2.6.1, enable cgo.

[ericonr]

[-- Attachment #1: Type: text/plain, Size: 2058 bytes --]

There's a merged pull request on the void-packages repository

chezmoi: update to 2.6.1, enable cgo.
https://github.com/void-linux/void-packages/pull/33298

Description:
> `$DATE` should be the date of the build in RFC3339 format, e.g. `2019-11-23T18:29:25Z`. The command `date -u +%Y-%m-%dT%H:%M:%SZ` will return a suitable value.

Added the `-X main.date=$DATE` ldflag based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

> Please enable cgo, if possible. chezmoi can be built and run without cgo, but the `.chezmoi.username` and `.chezmoi.group` template variables may not be set correctly on some systems.

Enabled cgo based on [upstream](https://github.com/twpayne/chezmoi/blob/master/docs/CONTRIBUTING.md#packaging).

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->