* Re: [PR PATCH] [Updated] New package: ax25-tools-0.0.10rc5
2021-09-01 20:08 [PR PATCH] New package: ax25-tools-0.0.10rc5 Emru1
@ 2021-09-01 20:42 ` Emru1
2021-09-01 22:15 ` Emru1
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Emru1 @ 2021-09-01 20:42 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1599 bytes --]
There is an updated pull request by Emru1 against master on the void-packages repository
https://github.com/Emru1/void-packages ax25-tools
https://github.com/void-linux/void-packages/pull/32800
New package: ax25-tools-0.0.10rc5
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/32800.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-ax25-tools-32800.patch --]
[-- Type: text/x-diff, Size: 1079 bytes --]
From 009821340298bcf1d89c6b77a9cf69343000f870 Mon Sep 17 00:00:00 2001
From: Emil Tomczyk <emil.tomczyk@skni.umcs.pl>
Date: Wed, 1 Sep 2021 22:42:11 +0200
Subject: [PATCH] New package: ax25-tools-0.0.10rc5
---
srcpkgs/ax25-tools/template | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 srcpkgs/ax25-tools/template
diff --git a/srcpkgs/ax25-tools/template b/srcpkgs/ax25-tools/template
new file mode 100644
index 000000000000..fa6ba15a7f0a
--- /dev/null
+++ b/srcpkgs/ax25-tools/template
@@ -0,0 +1,13 @@
+# Template file for 'ax25-tools'
+pkgname=ax25-tools
+version=0.0.10rc5
+revision=1
+wrksrc="ax25-tools-${version/rc/-rc}"
+build_style=gnu-configure
+makedepends="zlib-devel libax25-devel"
+short_desc="Package containing many essential tools for hamradio on Linux"
+maintainer="Emil Tomczyk <emil.tomczyk@skni.umcs.pl>"
+license="GPL-2.0-only"
+homepage="https://www.linux-ax25.org/wiki/Main_Page"
+distfiles="https://www.linux-ax25.org/pub/ax25-tools/${wrksrc}.tar.gz"
+checksum=92a9cb8b58a86dcb9f55630fc54c9a46c58a20fc93bed524b8c111190b36aa06
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PR PATCH] [Updated] New package: ax25-tools-0.0.10rc5
2021-09-01 20:08 [PR PATCH] New package: ax25-tools-0.0.10rc5 Emru1
2021-09-01 20:42 ` [PR PATCH] [Updated] " Emru1
@ 2021-09-01 22:15 ` Emru1
2022-06-05 2:14 ` github-actions
2022-06-19 2:15 ` [PR PATCH] [Closed]: " github-actions
3 siblings, 0 replies; 5+ messages in thread
From: Emru1 @ 2021-09-01 22:15 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1599 bytes --]
There is an updated pull request by Emru1 against master on the void-packages repository
https://github.com/Emru1/void-packages ax25-tools
https://github.com/void-linux/void-packages/pull/32800
New package: ax25-tools-0.0.10rc5
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/32800.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-ax25-tools-32800.patch --]
[-- Type: text/x-diff, Size: 7609 bytes --]
From 1e0e21671200b878f0b43f20ca60b680656c9b4e Mon Sep 17 00:00:00 2001
From: Emil Tomczyk <emil.tomczyk@skni.umcs.pl>
Date: Thu, 2 Sep 2021 00:14:39 +0200
Subject: [PATCH] New package: ax25-tools-0.0.10rc5
---
srcpkgs/ax25-tools/patches/musl.patch | 154 ++++++++++++++++++++++++++
srcpkgs/ax25-tools/template | 13 +++
2 files changed, 167 insertions(+)
create mode 100644 srcpkgs/ax25-tools/patches/musl.patch
create mode 100644 srcpkgs/ax25-tools/template
diff --git a/srcpkgs/ax25-tools/patches/musl.patch b/srcpkgs/ax25-tools/patches/musl.patch
new file mode 100644
index 000000000000..53a8ac88f800
--- /dev/null
+++ b/srcpkgs/ax25-tools/patches/musl.patch
@@ -0,0 +1,154 @@
+Common subdirectories: tcpip/.deps and tcpip_a/.deps
+diff --color --new-file -Np1 tcpip/talkd.h tcpip_a/talkd.h
+*** a/tcpip/talkd.h 1970-01-01 01:00:00.000000000 +0100
+--- b/tcpip/talkd.h 2021-09-01 23:25:25.059430912 +0200
+***************
+*** 0 ****
+--- 1,127 ----
++
++ /*
++ * Copyright (c) 1983, 1993
++ * The Regents of the University of California. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in the
++ * documentation and/or other materials provided with the distribution.
++ * 4. Neither the name of the University nor the names of its contributors
++ * may be used to endorse or promote products derived from this software
++ * without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++ * SUCH DAMAGE.
++ *
++ * @(#)talkd.h 8.1 (Berkeley) 6/2/93
++ */
++
++ #ifndef _PROTOCOLS_TALKD_H
++ #define _PROTOCOLS_TALKD_H 1
++
++ /*
++ * This describes the protocol used by the talk server and clients.
++ *
++ * The talk server acts a repository of invitations, responding to
++ * requests by clients wishing to rendezvous for the purpose of
++ * holding a conversation. In normal operation, a client, the caller,
++ * initiates a rendezvous by sending a CTL_MSG to the server of
++ * type LOOK_UP. This causes the server to search its invitation
++ * tables to check if an invitation currently exists for the caller
++ * (to speak to the callee specified in the message). If the lookup
++ * fails, the caller then sends an ANNOUNCE message causing the server
++ * to broadcast an announcement on the callee's login ports requesting
++ * contact. When the callee responds, the local server uses the
++ * recorded invitation to respond with the appropriate rendezvous
++ * address and the caller and callee client programs establish a
++ * stream connection through which the conversation takes place.
++ */
++
++ #include <sys/types.h>
++ #include <sys/socket.h>
++ #include <stdint.h>
++
++ #include <features.h>
++ #ifndef __GLIBC__
++ struct osockaddr
++ {
++ unsigned short int sa_family;
++ unsigned char sa_data[14];
++ };
++ #else
++ #include <bits/types/struct_osockaddr.h>
++ #endif
++
++ /*
++ * Client->server request message format.
++ */
++ typedef struct {
++ unsigned char vers; /* protocol version */
++ unsigned char type; /* request type, see below */
++ unsigned char answer; /* not used */
++ unsigned char pad;
++ uint32_t id_num; /* message id */
++ struct osockaddr addr; /* old (4.3) style */
++ struct osockaddr ctl_addr; /* old (4.3) style */
++ int32_t pid; /* caller's process id */
++ #define NAME_SIZE 12
++ char l_name[NAME_SIZE];/* caller's name */
++ char r_name[NAME_SIZE];/* callee's name */
++ #define TTY_SIZE 16
++ char r_tty[TTY_SIZE];/* callee's tty name */
++ } CTL_MSG;
++
++ /*
++ * Server->client response message format.
++ */
++ typedef struct {
++ unsigned char vers; /* protocol version */
++ unsigned char type; /* type of request message, see below */
++ unsigned char answer; /* response to request message, see below */
++ unsigned char pad;
++ uint32_t id_num; /* message id */
++ struct osockaddr addr; /* address for establishing conversation */
++ } CTL_RESPONSE;
++
++ #define TALK_VERSION 1 /* protocol version */
++
++ /* message type values */
++ #define LEAVE_INVITE 0 /* leave invitation with server */
++ #define LOOK_UP 1 /* check for invitation by callee */
++ #define DELETE 2 /* delete invitation by caller */
++ #define ANNOUNCE 3 /* announce invitation by caller */
++
++ /* answer values */
++ #define SUCCESS 0 /* operation completed properly */
++ #define NOT_HERE 1 /* callee not logged in */
++ #define FAILED 2 /* operation failed for unexplained reason */
++ #define MACHINE_UNKNOWN 3 /* caller's machine name unknown */
++ #define PERMISSION_DENIED 4 /* callee's tty doesn't permit announce */
++ #define UNKNOWN_REQUEST 5 /* request has invalid type value */
++ #define BADVERSION 6 /* request has invalid protocol version */
++ #define BADADDR 7 /* request has invalid addr value */
++ #define BADCTLADDR 8 /* request has invalid ctl_addr value */
++
++ /*
++ * Operational parameters.
++ */
++ #define MAX_LIFE 60 /* max time daemon saves invitations */
++ /* RING_WAIT should be 10's of seconds less than MAX_LIFE */
++ #define RING_WAIT 30 /* time to wait before resending invitation */
++
++ #endif /* protocols/talkd.h */
++
+diff --color --new-file -Np1 tcpip/ttylinkd.c tcpip_a/ttylinkd.c
+*** a/tcpip/ttylinkd.c 2021-09-01 23:20:39.121449187 +0200
+--- b/tcpip/ttylinkd.c 2021-09-01 23:25:25.059430912 +0200
+***************
+*** 41,43 ****
+
+! #include <protocols/talkd.h>
+
+--- 41,43 ----
+
+! #include "talkd.h"
+
+*** a/dmascc/dmascc_cfg.c 2019-03-28 19:07:47.000000000 +0100
+--- b/dmascc/dmascc_cfg.c 2021-09-01 23:41:28.698369324 +0200
+***************
+*** 26,27 ****
+--- 26,28 ----
+ #include <sys/ioctl.h>
++ #include <sys/types.h>
+ #include <linux/if.h>
diff --git a/srcpkgs/ax25-tools/template b/srcpkgs/ax25-tools/template
new file mode 100644
index 000000000000..fa6ba15a7f0a
--- /dev/null
+++ b/srcpkgs/ax25-tools/template
@@ -0,0 +1,13 @@
+# Template file for 'ax25-tools'
+pkgname=ax25-tools
+version=0.0.10rc5
+revision=1
+wrksrc="ax25-tools-${version/rc/-rc}"
+build_style=gnu-configure
+makedepends="zlib-devel libax25-devel"
+short_desc="Package containing many essential tools for hamradio on Linux"
+maintainer="Emil Tomczyk <emil.tomczyk@skni.umcs.pl>"
+license="GPL-2.0-only"
+homepage="https://www.linux-ax25.org/wiki/Main_Page"
+distfiles="https://www.linux-ax25.org/pub/ax25-tools/${wrksrc}.tar.gz"
+checksum=92a9cb8b58a86dcb9f55630fc54c9a46c58a20fc93bed524b8c111190b36aa06
^ permalink raw reply [flat|nested] 5+ messages in thread