* [ISSUE] ZFS DKMS build fails on freshly installed system
@ 2022-09-30 9:36 drichline
2022-09-30 13:14 ` Duncaen
` (7 more replies)
0 siblings, 8 replies; 9+ messages in thread
From: drichline @ 2022-09-30 9:36 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1370 bytes --]
New issue by drichline on void-packages repository
https://github.com/void-linux/void-packages/issues/39539
Description:
### Is this a new report?
Yes
### System Info
Void 5.19.10_1 x86_64 GenuineIntel/VM uptodate rFF
### Package(s) Affected
zfs-2.1.5_3
### Does a report exist for this bug with the project's home (upstream) and/or another distro?
_No response_
### Expected behaviour
I installed a fresh Void system, updated with xbps-install -Su, rebooted into kernel 5.19 (also tested with linux-lts, same result), and attempted to install ZFS.
### Actual behaviour
On installing (and reinstalling) ZFS, this is the end of the xbps output:
```zfs-2.1.5_3: configuring ...
Added DKMS module 'zfs-2.1.5'.
Skipping kernel-5.13.19_1. kernel-headers package not installed...
Building DKMS module 'zfs-2.1.5' for kernel-5.19.10_1... Killed
```
Manually building with the DKMS module (sudo dkms build zfs/2.1.5) ended with a segmentation fault in gcc and the attached [make.log](https://github.com/void-linux/void-packages/files/9682842/make.log) file.
### Steps to reproduce
(Please note, this is my first time using void. I reinstalled and tried again to make sure it wasn't a fluke)
1. Install a fresh void system (tried with both local and netinstall)
2. Sync/update system and reboot
3. xbps-install zfs
4. DKMS fails, even on kernels <5.18
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
@ 2022-09-30 13:14 ` Duncaen
2022-09-30 13:14 ` Duncaen
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Duncaen @ 2022-09-30 13:14 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 270 bytes --]
New comment by Duncaen on void-packages repository
https://github.com/void-linux/void-packages/issues/39539#issuecomment-1263560487
Comment:
Looks like you are missing the `linux5.19-headers` package, which should have been installed through the `linux` meta package.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
2022-09-30 13:14 ` Duncaen
@ 2022-09-30 13:14 ` Duncaen
2022-09-30 13:31 ` ahesford
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Duncaen @ 2022-09-30 13:14 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 270 bytes --]
New comment by Duncaen on void-packages repository
https://github.com/void-linux/void-packages/issues/39539#issuecomment-1263560487
Comment:
Looks like you are missing the `linux5.19-headers` package, which should have been installed through the `linux` meta package.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
2022-09-30 13:14 ` Duncaen
2022-09-30 13:14 ` Duncaen
@ 2022-09-30 13:31 ` ahesford
2022-09-30 14:02 ` drichline
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: ahesford @ 2022-09-30 13:31 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 414 bytes --]
New comment by ahesford on void-packages repository
https://github.com/void-linux/void-packages/issues/39539#issuecomment-1263580109
Comment:
I can't reproduce this using the [ZFSBootMenu test environment](https://github.com/zbm-dev/zfsbootmenu/tree/master/testing) modified to install `linux5.19` and its headers.
I recommend you run `xbps-pkgdb -a` to confirm that everything on your system is as expected.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
` (2 preceding siblings ...)
2022-09-30 13:31 ` ahesford
@ 2022-09-30 14:02 ` drichline
2022-09-30 14:02 ` drichline
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: drichline @ 2022-09-30 14:02 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1006 bytes --]
New comment by drichline on void-packages repository
https://github.com/void-linux/void-packages/issues/39539#issuecomment-1263617453
Comment:
> Looks like you are missing the `linux5.19-headers` package, which should have been installed through the `linux` meta package.
Thanks, but it was already installed
> I recommend you run `xbps-pkgdb -a` to confirm that everything on your system is as expected.
Thanks! Even though it's a fresh install, it returned:
```
ERROR: linux5.19: /boot/config-5.19.10_1 mtime mismatch (current: 1664005020, stored 1664005021)
ERROR: linux5.19: /boot/vmlinuz-5.19.10_1 mtime mismatch (current: 1664005020, stored 1664005021)
ERROR: linux5.19: files check FAILED.
```
Reinstalling `linux` didn't change anything, and DKMS still fails with the same error; do you have any suggestions on how to proceed? I'm just confused because this error doesn't seem widespread, but I've encountered it on two brand-new Void installations. Thanks so much for the help 💜
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
` (3 preceding siblings ...)
2022-09-30 14:02 ` drichline
@ 2022-09-30 14:02 ` drichline
2022-09-30 14:10 ` ahesford
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: drichline @ 2022-09-30 14:02 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1012 bytes --]
New comment by drichline on void-packages repository
https://github.com/void-linux/void-packages/issues/39539#issuecomment-1263617453
Comment:
> Looks like you are missing the `linux5.19-headers` package, which should have been installed through the `linux` meta package.
Thanks, but it was already installed
> I recommend you run `xbps-pkgdb -a` to confirm that everything on your system is as expected.
Thanks! Even though it's a fresh install, it returned:
```
ERROR: linux5.19: /boot/config-5.19.10_1 mtime mismatch (current: 1664005020, stored 1664005021)
ERROR: linux5.19: /boot/vmlinuz-5.19.10_1 mtime mismatch (current: 1664005020, stored 1664005021)
ERROR: linux5.19: files check FAILED.
```
Reinstalling `linux` didn't change anything, and DKMS still fails with the same error; do you have any suggestions on how to proceed? I'm just confused because this error doesn't seem widespread, but I've encountered it on two brand-new Void installations. Thanks so much for the help 💜
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
` (4 preceding siblings ...)
2022-09-30 14:02 ` drichline
@ 2022-09-30 14:10 ` ahesford
2022-09-30 15:33 ` [ISSUE] [CLOSED] " drichline
2022-09-30 15:33 ` drichline
7 siblings, 0 replies; 9+ messages in thread
From: ahesford @ 2022-09-30 14:10 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 244 bytes --]
New comment by ahesford on void-packages repository
https://github.com/void-linux/void-packages/issues/39539#issuecomment-1263627717
Comment:
The mtime mismatch would be expected if `/boot` is, *e.g.*, on a FAT file system. What is your CPU?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [ISSUE] [CLOSED] ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
` (5 preceding siblings ...)
2022-09-30 14:10 ` ahesford
@ 2022-09-30 15:33 ` drichline
2022-09-30 15:33 ` drichline
7 siblings, 0 replies; 9+ messages in thread
From: drichline @ 2022-09-30 15:33 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1373 bytes --]
Closed issue by drichline on void-packages repository
https://github.com/void-linux/void-packages/issues/39539
Description:
### Is this a new report?
Yes
### System Info
Void 5.19.10_1 x86_64 GenuineIntel/VM uptodate rFF
### Package(s) Affected
zfs-2.1.5_3
### Does a report exist for this bug with the project's home (upstream) and/or another distro?
_No response_
### Expected behaviour
I installed a fresh Void system, updated with xbps-install -Su, rebooted into kernel 5.19 (also tested with linux-lts, same result), and attempted to install ZFS.
### Actual behaviour
On installing (and reinstalling) ZFS, this is the end of the xbps output:
```zfs-2.1.5_3: configuring ...
Added DKMS module 'zfs-2.1.5'.
Skipping kernel-5.13.19_1. kernel-headers package not installed...
Building DKMS module 'zfs-2.1.5' for kernel-5.19.10_1... Killed
```
Manually building with the DKMS module (sudo dkms build zfs/2.1.5) ended with a segmentation fault in gcc and the attached [make.log](https://github.com/void-linux/void-packages/files/9682842/make.log) file.
### Steps to reproduce
(Please note, this is my first time using void. I reinstalled and tried again to make sure it wasn't a fluke)
1. Install a fresh void system (tried with both local and netinstall)
2. Sync/update system and reboot
3. xbps-install zfs
4. DKMS fails, even on kernels <5.18
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: ZFS DKMS build fails on freshly installed system
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
` (6 preceding siblings ...)
2022-09-30 15:33 ` [ISSUE] [CLOSED] " drichline
@ 2022-09-30 15:33 ` drichline
7 siblings, 0 replies; 9+ messages in thread
From: drichline @ 2022-09-30 15:33 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 548 bytes --]
New comment by drichline on void-packages repository
https://github.com/void-linux/void-packages/issues/39539#issuecomment-1263724493
Comment:
I'm so sorry, all this troubleshooting was entirely self-inflicted: my VM had 512 MB of memory with no swap, which was not enough to compile the module. Thank you again for all the help 💜
> The mtime mismatch would be expected if `/boot` is, _e.g._, on a FAT file system. What is your CPU?
It was MBR/vfat so I wouldn't have to mess with EFI boot. The CPU is GenuineIntel Skylake (i5-10210U)
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-09-30 15:33 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-30 9:36 [ISSUE] ZFS DKMS build fails on freshly installed system drichline
2022-09-30 13:14 ` Duncaen
2022-09-30 13:14 ` Duncaen
2022-09-30 13:31 ` ahesford
2022-09-30 14:02 ` drichline
2022-09-30 14:02 ` drichline
2022-09-30 14:10 ` ahesford
2022-09-30 15:33 ` [ISSUE] [CLOSED] " drichline
2022-09-30 15:33 ` drichline
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).