[PR PATCH] xdm: enable xft support

[PR PATCH] xdm: enable xft support

[dsemy]

[-- Attachment #1: Type: text/plain, Size: 1652 bytes --]

There is a new pull request by dsemy against master on the void-packages repository

https://github.com/dsemy/void-packages master
https://github.com/void-linux/void-packages/pull/31156

xdm: enable xft support
Enable Xft support to allow using more fonts with the xlogin widget.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/31156.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-master-31156.patch --]
[-- Type: text/x-diff, Size: 1065 bytes --]

From cbf44fa61f6e224f822281e55a8d54da62e19482 Mon Sep 17 00:00:00 2001
From: Daniel Semyonov <daniel@dsemy.com>
Date: Fri, 28 May 2021 02:00:43 +0300
Subject: [PATCH] xdm: enable xft support

Enable Xft support to allow using more fonts with the xlogin widget.
---
 srcpkgs/xdm/template | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/srcpkgs/xdm/template b/srcpkgs/xdm/template
index cf3d1de3f8db..fcbaceef2bcc 100644
--- a/srcpkgs/xdm/template
+++ b/srcpkgs/xdm/template
@@ -7,14 +7,15 @@ configure_args="--with-random-device=/dev/urandom
  --with-utmp-file=/var/run/utmp
  --with-wtmp-file=/var/log/wtmp
  --with-xdmconfigdir=/etc/X11/xdm
- --with-pam"
+ --with-pam
+ --with-xft"
 conf_files="/etc/pam.d/xdm
  /etc/X11/xdm/Xaccess
  /etc/X11/xdm/xdm-config
  /etc/X11/xdm/Xresources
  /etc/X11/xdm/Xservers"
 hostmakedepends="pkg-config"
-makedepends="pam-devel libXaw-devel"
+makedepends="pam-devel libXaw-devel libXft-devel"
 depends="sessreg xconsole xsm"
 short_desc="X Display Manager"
 maintainer="Leah Neukirchen <leah@vuxu.org>"

Re: xdm: enable xft support

[ericonr]

[-- Attachment #1: Type: text/plain, Size: 225 bytes --]

New comment by ericonr on void-packages repository

https://github.com/void-linux/void-packages/pull/31156#issuecomment-850028502

Comment:
You need to increase the revision for the change to take effect.

@leahneukirchen 

Re: [PR PATCH] [Updated] xdm: enable xft support

[dsemy]

[-- Attachment #1: Type: text/plain, Size: 1657 bytes --]

There is an updated pull request by dsemy against master on the void-packages repository

https://github.com/dsemy/void-packages master
https://github.com/void-linux/void-packages/pull/31156

xdm: enable xft support
Enable Xft support to allow using more fonts with the xlogin widget.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->


A patch file from https://github.com/void-linux/void-packages/pull/31156.patch is attached

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-master-31156.patch --]
[-- Type: text/x-diff, Size: 1175 bytes --]

From ff2ae08ab92a94fae03b205d63523517d0790c17 Mon Sep 17 00:00:00 2001
From: Daniel Semyonov <daniel@dsemy.com>
Date: Fri, 28 May 2021 02:00:43 +0300
Subject: [PATCH] xdm: enable xft support

Enable Xft support to allow using more fonts with the xlogin widget.
---
 srcpkgs/xdm/template | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/srcpkgs/xdm/template b/srcpkgs/xdm/template
index cf3d1de3f8db..8eb910bf6c8b 100644
--- a/srcpkgs/xdm/template
+++ b/srcpkgs/xdm/template
@@ -1,20 +1,21 @@
 # Template file for 'xdm'
 pkgname=xdm
 version=1.1.12
-revision=4
+revision=5
 build_style=gnu-configure
 configure_args="--with-random-device=/dev/urandom
  --with-utmp-file=/var/run/utmp
  --with-wtmp-file=/var/log/wtmp
  --with-xdmconfigdir=/etc/X11/xdm
- --with-pam"
+ --with-pam
+ --with-xft"
 conf_files="/etc/pam.d/xdm
  /etc/X11/xdm/Xaccess
  /etc/X11/xdm/xdm-config
  /etc/X11/xdm/Xresources
  /etc/X11/xdm/Xservers"
 hostmakedepends="pkg-config"
-makedepends="pam-devel libXaw-devel"
+makedepends="pam-devel libXaw-devel libXft-devel"
 depends="sessreg xconsole xsm"
 short_desc="X Display Manager"
 maintainer="Leah Neukirchen <leah@vuxu.org>"

Re: xdm: enable xft support

[dsemy]

[-- Attachment #1: Type: text/plain, Size: 152 bytes --]

New comment by dsemy on void-packages repository

https://github.com/void-linux/void-packages/pull/31156#issuecomment-850212488

Comment:
Sorry, fixed.

Re: [PR PATCH] [Merged]: xdm: enable xft support

[ericonr]

[-- Attachment #1: Type: text/plain, Size: 1506 bytes --]

There's a merged pull request on the void-packages repository

xdm: enable xft support
https://github.com/void-linux/void-packages/pull/31156

Description:
Enable Xft support to allow using more fonts with the xlogin widget.

<!-- Mark items with [x] where applicable -->

#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)

#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR

<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!-- 
#### Does it build and run successfully? 
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
  - [ ] aarch64-musl
  - [ ] armv7l
  - [ ] armv6l-musl
-->