From: Logarithmus <Logarithmus@users.noreply.github.com>
To: ml@inbox.vuxu.org
Subject: [PR PATCH] New package: zam-plugins-3.14
Date: Sat, 26 Jun 2021 18:00:52 +0200 [thread overview]
Message-ID: <gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-31665@inbox.vuxu.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 1624 bytes --]
There is a new pull request by Logarithmus against master on the void-packages repository
https://github.com/Logarithmus/void-packages zam-plugins
https://github.com/void-linux/void-packages/pull/31665
New package: zam-plugins-3.14
<!-- Mark items with [x] where applicable -->
Required for `pulseeffects` Maximizer effect.
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/31665.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-zam-plugins-31665.patch --]
[-- Type: text/x-diff, Size: 7283 bytes --]
From f5c434827c21280b4fabaf9fae55360292b5cb3c Mon Sep 17 00:00:00 2001
From: Artur Sinila <freesoftware@logarithmus.dev>
Date: Sat, 26 Jun 2021 04:00:10 +0300
Subject: [PATCH] New package: zam-plugins-3.14
---
.../zam-plugins/files/zam-plugins.directory | 5 +
| 30 +++++
srcpkgs/zam-plugins/template | 103 ++++++++++++++++++
3 files changed, 138 insertions(+)
create mode 100644 srcpkgs/zam-plugins/files/zam-plugins.directory
create mode 100644 srcpkgs/zam-plugins/files/zam-plugins.menu
create mode 100644 srcpkgs/zam-plugins/template
diff --git a/srcpkgs/zam-plugins/files/zam-plugins.directory b/srcpkgs/zam-plugins/files/zam-plugins.directory
new file mode 100644
index 000000000000..df902aee57a8
--- /dev/null
+++ b/srcpkgs/zam-plugins/files/zam-plugins.directory
@@ -0,0 +1,5 @@
+[Desktop Entry]
+Name=zam-plugins
+Icon=zam-plugins
+Type=Directory
+Keywords=audio;sound;jackd;zam-plugins;
--git a/srcpkgs/zam-plugins/files/zam-plugins.menu b/srcpkgs/zam-plugins/files/zam-plugins.menu
new file mode 100644
index 000000000000..85963cd12796
--- /dev/null
+++ b/srcpkgs/zam-plugins/files/zam-plugins.menu
@@ -0,0 +1,30 @@
+<!DOCTYPE Menu PUBLIC "-//freedesktop//DTD Menu 1.0//EN" "http://www.freedesktop.org/standards/menu-spec/menu-1.0.dtd">
+<Menu>
+ <Name>Applications</Name>
+ <Menu>
+ <Name>Multimedia</Name>
+ <Menu>
+ <Name>zam-plugins</Name>
+ <Directory>zam-plugins.directory</Directory>
+ <Include>
+ <Filename>com.zamaudio.zamautosat.desktop</Filename>
+ <Filename>com.zamaudio.zamaximx2.desktop</Filename>
+ <Filename>com.zamaudio.zamcomp.desktop</Filename>
+ <Filename>com.zamaudio.zamcompx2.desktop</Filename>
+ <Filename>com.zamaudio.zamdelay.desktop</Filename>
+ <Filename>com.zamaudio.zamdynamiceq.desktop</Filename>
+ <Filename>com.zamaudio.zameq2.desktop</Filename>
+ <Filename>com.zamaudio.zamgate.desktop</Filename>
+ <Filename>com.zamaudio.zamgatex2.desktop</Filename>
+ <Filename>com.zamaudio.zamgeq31.desktop</Filename>
+ <Filename>com.zamaudio.zamgrains.desktop</Filename>
+ <Filename>com.zamaudio.zamheadx2.desktop</Filename>
+ <Filename>com.zamaudio.zammulticompx2.desktop</Filename>
+ <Filename>com.zamaudio.zamphono.desktop</Filename>
+ <Filename>com.zamaudio.zamtube.desktop</Filename>
+ <Filename>com.zamaudio.zamulticomp.desktop</Filename>
+ <Filename>com.zamaudio.zamverb.desktop</Filename>
+ </Include>
+ </Menu>
+ </Menu>
+</Menu>
diff --git a/srcpkgs/zam-plugins/template b/srcpkgs/zam-plugins/template
new file mode 100644
index 000000000000..383b3105d6b0
--- /dev/null
+++ b/srcpkgs/zam-plugins/template
@@ -0,0 +1,103 @@
+# Template file for 'zam-plugins'
+pkgname=zam-plugins
+version=3.14
+revision=1
+build_style=gnu-makefile
+make_use_env=yes
+make_build_args="HAVE_ZITA_CONVOLVER=true"
+hostmakedepends="pkgconf git gendesk"
+makedepends="libX11-devel libglvnd-devel liblo-devel jack-devel ladspa-sdk
+ libsamplerate-devel zita-convolver-devel"
+# Use system zita-convolver instead of the vendored one
+short_desc="LADSPA/LV2/VST/JACK audio plugins for high-quality processing"
+maintainer="Artur Sinila <freesoftware@logarithmus.dev>"
+license="GPL-2.0-or-later"
+homepage="http://zamaudio.com/"
+changelog="https://github.com/zamaudio/zam-plugins/blob/${version}/changelog"
+
+do_fetch() {
+ git clone --depth 1 --branch ${version} --single-branch \
+ --recurse-submodules --shallow-submodules https://github.com/zamaudio/zam-plugins \
+ zam-plugins-${version}
+}
+
+# Huge thanks to David Runge <dvzrv@archlinux.org>, maintainer of zam-plugins in Arch Linux
+post_install() {
+ _names=('zamaximx2' 'zamulticomp' 'zammulticompx2' 'zamautosat' 'zamcomp'
+ 'zamcompx2' 'zamdelay' 'zamdynamiceq' 'zameq2' 'zamgeq31' 'zamgate'
+ 'zamgatex2' 'zamgrains' 'zamheadx2' 'zamphono' 'zamtube' 'zamverb')
+
+ declare -A exec_names=(
+ ["zamaximx2"]="ZaMaximX2"
+ ["zamulticomp"]="ZaMultiComp"
+ ["zamulticompx2"]="ZaMultiCompX2"
+ ["zamautosat"]="ZamAutoSat"
+ ["zamcomp"]="ZamComp"
+ ["zamcompx2"]="ZamCompX2"
+ ["zamdelay"]="ZamDelay"
+ ["zamdynamiceq"]="ZamDynamicEQ"
+ ["zameq2"]="ZamEQ2"
+ ["zamgeq31"]="ZamGEQ31"
+ ["zamgate"]="ZamGate"
+ ["zamgatex2"]="ZamGateX2"
+ ["zamgrains"]="ZamGrains"
+ ["zamheadx2"]="ZamHeadX2"
+ ["zamphono"]="ZamPhono"
+ ["zamtube"]="ZamTube"
+ ["zamverb"]="ZamVerb"
+ )
+ declare -A comments=(
+ ["zamaximx2"]="Acts as a brickwall limiter for mastering in its default state, but can also be tweaked to raise the average level as a stereo maximizer without ever clipping"
+ ["zamulticomp"]="Mono multiband compressor, with 3 adjustable bands."
+ ["zamulticompx2"]="Stereo version of ZaMultiComp, with individual threshold controls for each band and real-time visualisation of comp curves."
+ ["zamautosat"]="An automatic saturation plugin, has been known to provide smooth levelling to live mic channels."
+ ["zamcomp"]="A powerful mono compressor strip"
+ ["zamcompx2"]="Stereo version of ZamComp with knee slew control"
+ ["zamdelay"]="A simple feedback delay unit with sync-to-host BPM feature and filter."
+ ["zamdynamiceq"]="A dynamic equalizer that changes its gain based on detecting a narrow band of frequencies."
+ ["zameq2"]="Two band parametric equaliser with high and low shelving circuits."
+ ["zamgeq31"]="31 band graphic equaliser, good for eq of live spaces, removing unwanted noise from a track etc."
+ ["zamgate"]="Gate plugin for ducking low gain sounds."
+ ["zamgatex2"]="Gate plugin for ducking low gain sounds, stereo version."
+ ["zamgrains"]="Granular Synthesizer"
+ ["zamheadx2"]="HRTF acoustic filtering plugin for directional sound."
+ ["zamphono"]="A collection of phono filters for restoring vinyl records, or preparing to cut new ones."
+ ["zamtube"]="Wave digital filter physical model of a triode tube amplifier stage, with modelled tone stacks from real guitar amplifiers"
+ ["zamverb"]="Reverb"
+ )
+ declare -A generic=(
+ ["zamaximx2"]="Maximizer and brickwall limiter"
+ ["zamulticomp"]="Mono Multiband Compressor"
+ ["zamulticompx2"]="Stereo Multiband Compressor"
+ ["zamautosat"]="Automatic Saturation"
+ ["zamcomp"]="Mono Compressor"
+ ["zamcompx2"]="Stereo Compressor"
+ ["zamdelay"]="Delay"
+ ["zamdynamiceq"]="Dynamic Equalizer"
+ ["zameq2"]="2 Band Parametric Equalizer"
+ ["zamgeq31"]="31 Band Graphic Equalizer"
+ ["zamgate"]="Mono Gate"
+ ["zamgatex2"]="Stereo Gate"
+ ["zamgrains"]="Granular Synthesizer"
+ ["zamheadx2"]="HRTF Acoustic Filtering"
+ ["zamphono"]="Phono Filters"
+ ["zamtube"]="Tube Amplifier"
+ ["zamverb"]="Reverb"
+ )
+
+ # Generate *.desktop files for each plugin
+ for name in "${_names[@]}"; do
+ gendesk -n \
+ --pkgname "com.zamaudio.${name}" \
+ --name "${name}" \
+ --exec "${exec_names[$name]}" \
+ --pkgdesc "${comments[$name]}" \
+ --genericname "${generic[$name]}"
+ done
+
+ install -vDm 644 *.desktop -t ${DESTDIR}/usr/share/applications/
+ vinstall ${FILESDIR}/zam-plugins.directory 644 usr/share/desktop-directories/
+ vinstall ${FILESDIR}/zam-plugins.menu 644 etc/xdg/menus/applications-merged/
+ vdoc README.md
+ vdoc changelog
+}
next reply other threads:[~2021-06-26 16:00 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-26 16:00 Logarithmus [this message]
2021-06-26 19:30 ` [PR REVIEW] " ericonr
2021-06-26 19:30 ` ericonr
2021-06-26 19:30 ` ericonr
2021-06-26 19:30 ` ericonr
2021-06-26 19:30 ` ericonr
2021-06-27 16:00 ` Logarithmus
2021-06-27 16:00 ` Logarithmus
2021-06-27 16:02 ` Logarithmus
2021-06-27 16:36 ` [PR PATCH] [Updated] " Logarithmus
2021-06-27 16:50 ` [PR REVIEW] " Logarithmus
2021-06-27 16:50 ` Logarithmus
2021-06-27 16:50 ` Logarithmus
2021-06-27 16:55 ` Logarithmus
2021-06-27 16:56 ` Logarithmus
2021-06-27 16:57 ` [PR PATCH] [Updated] " Logarithmus
2021-06-27 17:07 ` [PR REVIEW] " Logarithmus
2021-06-27 17:29 ` Logarithmus
2021-06-27 17:30 ` Logarithmus
2021-06-27 17:51 ` ericonr
2021-06-27 17:51 ` ericonr
2021-06-27 17:53 ` Logarithmus
2021-06-27 18:01 ` ericonr
2021-06-27 18:33 ` Logarithmus
2021-06-27 18:45 ` ericonr
2021-06-27 19:02 ` Duncaen
2021-06-27 19:04 ` Logarithmus
2021-06-27 19:23 ` [PR PATCH] [Updated] " Logarithmus
2021-06-27 19:56 ` Logarithmus
2021-06-27 20:35 ` [PR PATCH] [Updated] " Logarithmus
2021-06-27 21:15 ` Logarithmus
2021-06-27 21:32 ` Logarithmus
2021-06-27 21:37 ` Logarithmus
2021-06-27 21:50 ` Logarithmus
2021-06-27 21:59 ` Logarithmus
2021-06-28 0:21 ` Logarithmus
2022-05-23 2:12 ` github-actions
2022-06-06 2:14 ` [PR PATCH] [Closed]: " github-actions
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=gh-mailinglist-notifications-41a7ca26-5023-4802-975b-f1789d68868e-void-packages-31665@inbox.vuxu.org \
--to=logarithmus@users.noreply.github.com \
--cc=ml@inbox.vuxu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).