* [9fans] drawterm problems after susupdate
@ 2023-02-20 15:23 fijal
2023-02-22 13:41 ` cinap_lenrek
0 siblings, 1 reply; 4+ messages in thread
From: fijal @ 2023-02-20 15:23 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 477 bytes --]
After sysupdate (+ mk install, new kernel) drawterm wich I used does not work anymore with message: waiting for FS: i/o on hangup channel.
Till update worked like a charm.
Any ideas?
Thanks
fijal
PS
Drawterm on void linux, 9front on kvm.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/Te0c7fa564759b89c-M713423b74c30b38e6e29813a
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 1095 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] drawterm problems after susupdate
2023-02-20 15:23 [9fans] drawterm problems after susupdate fijal
@ 2023-02-22 13:41 ` cinap_lenrek
2023-02-22 19:06 ` fijal
0 siblings, 1 reply; 4+ messages in thread
From: cinap_lenrek @ 2023-02-22 13:41 UTC (permalink / raw)
To: 9fans
I think it would be better to direct 9front specific questions
to the 9front mailinglist unless you understand the scope
well enougth that it might as well apply to plan9 in general.
Anyway here you go (yes, this is 9front specific answer):
This is likely due to the removal of devssl from the kernel.
The cpu (and import) porotocols have been removed from 9front
for a while now (but the binaries would still remain on your
file-system) and replaced by rcpu(1), which uses devtls.
The cpu/import programs where the only ones still using devssl.
A drawterm exist that is maintained and supports both the
previous cpu as well as the new rcpu protocols.
https://git.9front.org/plan9front/drawterm/HEAD/info.html
The new rcpu service (also handling rimport/rexport and rx)
has the following listen script: /rc/bin/service/tcp17019
#!/bin/rc
if(~ $#* 3){
netdir=$3
remote=$2!`{cat $3/remote}
}
fn server {
~ $#remote 0 || echo -n $netdir $remote >/proc/$pid/args
rm -f /env/'fn#server'
. <{n=`{read} && ! ~ $#n 0 && read -c $n} >[2=1]
}
exec tlssrv -a /bin/rc -c server
I fear a bit that given you where still be using cpu protocol
with an old drawterm that you probably havnt even upgraded your
authentication server to the new dp9ik key as well.
P9sk1 is still supported in 9front (factotum and authserver),
but has long been disabled in the authserver listen script by
default (passing -N to auth/authsrv).
So please make sure you have set a new key as well as have the
-N flag passed in /rc/bin/service.aith/tcp567 like:
#!/bin/rc
exec /bin/auth/authsrv -N $3
--
cinap
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/Te0c7fa564759b89c-Mc8862432d943dea5b65423b9
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] drawterm problems after susupdate
2023-02-22 13:41 ` cinap_lenrek
@ 2023-02-22 19:06 ` fijal
2023-08-06 23:00 ` dmadhatr via 9fans
0 siblings, 1 reply; 4+ messages in thread
From: fijal @ 2023-02-22 19:06 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 354 bytes --]
Thanks a lot. Switching to dp9ik and rcpu did the job. Stock void linux drawterm also works.
Once again - many thanks.
fijal
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/Te0c7fa564759b89c-Maa9fa52d3c8c31f3d713543f
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 878 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] drawterm problems after susupdate
2023-02-22 19:06 ` fijal
@ 2023-08-06 23:00 ` dmadhatr via 9fans
0 siblings, 0 replies; 4+ messages in thread
From: dmadhatr via 9fans @ 2023-08-06 23:00 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 800 bytes --]
I've been dealing with this same issue today running a VPS on sdf with their start script and configuration - I am also using their verison of drawterm. Drawterm on ParrotOS, 9Front on SDF VPS. Same error as the poster from draw term, and confirming the reply, on the server I saw : cpu: encrypt: unknown device in # filename - tried both their start script and this method: http://sdf.org/?tutorials/VPS_Plan9 - had no idea this was the issue until I found this post, have been on IRC all day asking about it. Will also reach out on the 9Front list as suggested.
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/Te0c7fa564759b89c-M54c9db7898b64611c2b24c61
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 1372 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-08-06 23:01 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-20 15:23 [9fans] drawterm problems after susupdate fijal
2023-02-22 13:41 ` cinap_lenrek
2023-02-22 19:06 ` fijal
2023-08-06 23:00 ` dmadhatr via 9fans
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).