* Re: [9fans] Newbie questions (setup problems)
@ 2000-06-26 13:41 David Butler
0 siblings, 0 replies; 4+ messages in thread
From: David Butler @ 2000-06-26 13:41 UTC (permalink / raw)
To: 9fans
If the system says "no physical memory", try setting in plan9.ini:
*kernelpercent=40
If you are using 640x480x8 try even less like 20.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] Newbie questions (setup problems)
2000-06-26 11:32 ` Randolph Fritz
@ 2000-06-26 13:04 ` Nigel Roles
0 siblings, 0 replies; 4+ messages in thread
From: Nigel Roles @ 2000-06-26 13:04 UTC (permalink / raw)
To: 9fans
Until Plan 9 is installed and can establish a swap partition,
physical memory is all it has.
----- Original Message -----
From: "Randolph Fritz" <randolph@cyber-dyne.com>
To: <9fans@cse.psu.edu>
Sent: Monday, June 26, 2000 12:32 PM
Subject: Re: [9fans] Newbie questions (setup problems)
> On Mon, Jun 26, 2000 at 09:02:02AM +0000, PB wrote:
> > Hello to everyone. I tried to install plan9 v3 on an IBM model 330
> > (sorry, I have no exact idea on what there is inside this machine)
> > but I had this answer:
> >
> > (...)
> > root is from (blah blah): kfs...boot: nop...kfs...no physical memory
> > no physical memory
> > no physical memory
> > (etc)
> >
> > Someone has any idea on what is the problem?
> >
>
> Probably you need more memory; that's what it turned out to be when I
> saw that message a few days ago.
>
> --
> Randolph Fritz
> Eugene, Oregon, USA
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [9fans] Newbie questions (setup problems)
2000-06-26 9:02 PB
@ 2000-06-26 11:32 ` Randolph Fritz
2000-06-26 13:04 ` Nigel Roles
0 siblings, 1 reply; 4+ messages in thread
From: Randolph Fritz @ 2000-06-26 11:32 UTC (permalink / raw)
To: 9fans
On Mon, Jun 26, 2000 at 09:02:02AM +0000, PB wrote:
> Hello to everyone. I tried to install plan9 v3 on an IBM model 330
> (sorry, I have no exact idea on what there is inside this machine)
> but I had this answer:
>
> (...)
> root is from (blah blah): kfs...boot: nop...kfs...no physical memory
> no physical memory
> no physical memory
> (etc)
>
> Someone has any idea on what is the problem?
>
Probably you need more memory; that's what it turned out to be when I
saw that message a few days ago.
--
Randolph Fritz
Eugene, Oregon, USA
^ permalink raw reply [flat|nested] 4+ messages in thread
* [9fans] Newbie questions (setup problems)
@ 2000-06-26 9:02 PB
2000-06-26 11:32 ` Randolph Fritz
0 siblings, 1 reply; 4+ messages in thread
From: PB @ 2000-06-26 9:02 UTC (permalink / raw)
To: 9fans
Hello to everyone. I tried to install plan9 v3 on an IBM model 330
(sorry, I have no exact idea on what there is inside this machine)
but I had this answer:
(...)
root is from (blah blah): kfs...boot: nop...kfs...no physical memory
no physical memory
no physical memory
(etc)
Someone has any idea on what is the problem?
I also tried to install it on my homemade pc, but alas it has an
unsupported Matrox G200. No solution other than changing
the card?
Thank you in advance
Pietro
------------
To answer take your filthy hands out of my address.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-06-26 13:41 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-06-26 13:41 [9fans] Newbie questions (setup problems) David Butler
-- strict thread matches above, loose matches on Subject: below --
2000-06-26 9:02 PB
2000-06-26 11:32 ` Randolph Fritz
2000-06-26 13:04 ` Nigel Roles
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).