* [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
@ 2006-11-26 3:40 lucio
2006-11-26 4:41 ` Bruce Ellis
` (2 more replies)
0 siblings, 3 replies; 13+ messages in thread
From: lucio @ 2006-11-26 3:40 UTC (permalink / raw)
To: 9fans
I haven't seen this, please excuse the re-post:
From: lucio
Date: Thu Nov 23 19:11:22 SAT 2006
To: 9fans@cse.psu.edu
Subject: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
> As a newbie i also found difficulty in installing inferno on plan9.
> the inferno's install.pdf is not comprehensive enough ( like your
> install notes)
Let me grab my chance right here. I get:
term% emu
; wm/wm
attachwindow: cannot handle window depth specifier x8r8g8b8
wmlib: can't allocate Display: initdisplay: /dev/draw/new: '/usr/inferno/dev/draw' file does not exist
;
and I can't imagine where to start attacking this problem.
Suggestions?
++L
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 3:40 [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes) lucio
@ 2006-11-26 4:41 ` Bruce Ellis
2006-11-26 5:00 ` Bruce Ellis
2006-11-26 5:11 ` Joel Salomon
2006-11-26 16:25 ` Russ Cox
2006-11-26 19:53 ` Charles Forsyth
2 siblings, 2 replies; 13+ messages in thread
From: Bruce Ellis @ 2006-11-26 4:41 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
Installation of OzInferno is easier ... one file, no dumb install shield.
But of course it doesn't exist. Ha ha ...
brucee
On 11/26/06, lucio@proxima.alt.za <lucio@proxima.alt.za> wrote:
> I haven't seen this, please excuse the re-post:
>
> From: lucio
> Date: Thu Nov 23 19:11:22 SAT 2006
> To: 9fans@cse.psu.edu
> Subject: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
>
> > As a newbie i also found difficulty in installing inferno on plan9.
> > the inferno's install.pdf is not comprehensive enough ( like your
> > install notes)
>
> Let me grab my chance right here. I get:
>
> term% emu
> ; wm/wm
> attachwindow: cannot handle window depth specifier x8r8g8b8
> wmlib: can't allocate Display: initdisplay: /dev/draw/new: '/usr/inferno/dev/draw' file does not exist
> ;
>
> and I can't imagine where to start attacking this problem.
> Suggestions?
>
> ++L
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 4:41 ` Bruce Ellis
@ 2006-11-26 5:00 ` Bruce Ellis
2006-11-26 5:11 ` Joel Salomon
1 sibling, 0 replies; 13+ messages in thread
From: Bruce Ellis @ 2006-11-26 5:00 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
sorry, i mis-read ... for Plan9 it's almost zero effort.
cpu% emu
Inferno Oz Beta [Cotopriz] main (pid=5116) interp
Initialize Dis: #U/boot.dis
stash$ ps
1 1 brucee release 4K 0:00.0 Sh[$Sys]
4 4 brucee alt 12K 0:00.0 Boot
5 1 brucee release 3K 0:00.0 FsLib[$Sys]
6 1 brucee recv 8K 0:00.0 SrvFS
7 1 brucee release 3K 0:00.0 FsLib[$Sys]
8 1 brucee recv 8K 0:00.0 SrvFS
12 1 brucee release 3K 0:00.0 FsLib[$Sys]
13 1 brucee recv 17K 0:00.0 MemFS
14 1 brucee ready 2K 0:00.0 Ps[$Sys]
stash$
On 11/26/06, Bruce Ellis <bruce.ellis@gmail.com> wrote:
> Installation of OzInferno is easier ... one file, no dumb install shield.
> But of course it doesn't exist. Ha ha ...
>
> brucee
>
> On 11/26/06, lucio@proxima.alt.za <lucio@proxima.alt.za> wrote:
> > I haven't seen this, please excuse the re-post:
> >
> > From: lucio
> > Date: Thu Nov 23 19:11:22 SAT 2006
> > To: 9fans@cse.psu.edu
> > Subject: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
> >
> > > As a newbie i also found difficulty in installing inferno on plan9.
> > > the inferno's install.pdf is not comprehensive enough ( like your
> > > install notes)
> >
> > Let me grab my chance right here. I get:
> >
> > term% emu
> > ; wm/wm
> > attachwindow: cannot handle window depth specifier x8r8g8b8
> > wmlib: can't allocate Display: initdisplay: /dev/draw/new: '/usr/inferno/dev/draw' file does not exist
> > ;
> >
> > and I can't imagine where to start attacking this problem.
> > Suggestions?
> >
> > ++L
> >
> >
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 4:41 ` Bruce Ellis
2006-11-26 5:00 ` Bruce Ellis
@ 2006-11-26 5:11 ` Joel Salomon
2006-11-26 9:53 ` Federico Benavento
1 sibling, 1 reply; 13+ messages in thread
From: Joel Salomon @ 2006-11-26 5:11 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> Installation of OzInferno is easier ... one file, no dumb install shield.
> But of course it doesn't exist. Ha ha ...
Which marketing or legal department's people need to have their toes
held to the fire to enable the release of OzInferno?
--Joel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 5:11 ` Joel Salomon
@ 2006-11-26 9:53 ` Federico Benavento
0 siblings, 0 replies; 13+ messages in thread
From: Federico Benavento @ 2006-11-26 9:53 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
hah
On 11/26/06, Joel Salomon <joelcsalomon@gmail.com> wrote:
> > Installation of OzInferno is easier ... one file, no dumb install shield.
> > But of course it doesn't exist. Ha ha ...
>
> Which marketing or legal department's people need to have their toes
> held to the fire to enable the release of OzInferno?
>
> --Joel
>
--
Federico G. Benavento
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 3:40 [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes) lucio
2006-11-26 4:41 ` Bruce Ellis
@ 2006-11-26 16:25 ` Russ Cox
2006-11-27 8:31 ` Lucio De Re
2006-11-26 19:53 ` Charles Forsyth
2 siblings, 1 reply; 13+ messages in thread
From: Russ Cox @ 2006-11-26 16:25 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> Suggestions?
Try using vgasize=...x16 or ...x24 instead of ...x32 in plan9.ini.
Russ
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 3:40 [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes) lucio
2006-11-26 4:41 ` Bruce Ellis
2006-11-26 16:25 ` Russ Cox
@ 2006-11-26 19:53 ` Charles Forsyth
2006-11-27 8:29 ` Lucio De Re
2 siblings, 1 reply; 13+ messages in thread
From: Charles Forsyth @ 2006-11-26 19:53 UTC (permalink / raw)
To: 9fans
> term% emu
> ; wm/wm
> attachwindow: cannot handle window depth specifier x8r8g8b8
> wmlib: can't allocate Display: initdisplay: /dev/draw/new: '/usr/inferno/dev/draw' file does not exist
how old is it? i'm fairly sure that was an artifact of some ancient code
that did little but get in the way, which i removed a little while ago
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 19:53 ` Charles Forsyth
@ 2006-11-27 8:29 ` Lucio De Re
0 siblings, 0 replies; 13+ messages in thread
From: Lucio De Re @ 2006-11-27 8:29 UTC (permalink / raw)
To: 9fans
> how old is it? i'm fairly sure that was an artifact of some ancient code
> that did little but get in the way, which i removed a little while ago
March 3rd, 2006, if memory serves. I haven't been aware of any later
release. Then again, I keep falling off the Inferno mailing list, so
I gave up on that one.
++L
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-26 16:25 ` Russ Cox
@ 2006-11-27 8:31 ` Lucio De Re
2006-11-27 13:38 ` Chad Dougherty
0 siblings, 1 reply; 13+ messages in thread
From: Lucio De Re @ 2006-11-27 8:31 UTC (permalink / raw)
To: 9fans
> Try using vgasize=...x16 or ...x24 instead of ...x32 in plan9.ini.
Sounds good, but I think I tried that. Of course, I'd be 1300 km and
three weeks away from being able to try it again.
I do like forsyth's answer better :-)
++L
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-27 8:31 ` Lucio De Re
@ 2006-11-27 13:38 ` Chad Dougherty
0 siblings, 0 replies; 13+ messages in thread
From: Chad Dougherty @ 2006-11-27 13:38 UTC (permalink / raw)
To: Lucio De Re, Fans of the OS Plan 9 from Bell Labs
Lucio De Re wrote:
>> Try using vgasize=...x16 or ...x24 instead of ...x32 in plan9.ini.
>
for what it's worth, i'm seeing this as well. the plan 9 is current and
the inferno is 20060303.
neither x16 or x24 fixed the problem.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2007-01-28 11:41 ` Charles Forsyth
@ 2007-01-30 5:15 ` lucio
0 siblings, 0 replies; 13+ messages in thread
From: lucio @ 2007-01-30 5:15 UTC (permalink / raw)
To: 9fans
> use the win.c i sent you many weeks ago?
Yes. That message got resurrected by rebooting my mail exchanger after
it failed and, seemingly, after its mail queue sweeper had died
undetected a while back.
My apologies to all who may have been inconvenienced in any way.
++L
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-23 17:11 ` [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes) lucio
@ 2007-01-28 11:41 ` Charles Forsyth
2007-01-30 5:15 ` lucio
0 siblings, 1 reply; 13+ messages in thread
From: Charles Forsyth @ 2007-01-28 11:41 UTC (permalink / raw)
To: 9fans
[-- Attachment #1: Type: text/plain, Size: 40 bytes --]
use the win.c i sent you many weeks ago?
[-- Attachment #2: Type: message/rfc822, Size: 3185 bytes --]
From: lucio@proxima.alt.za
To: 9fans@cse.psu.edu
Subject: [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
Date: Thu, 23 Nov 2006 19:11:22 +0200
Message-ID: <1edd1884eccd810284b311c506cf9a8f@proxima.alt.za>
> As a newbie i also found difficulty in installing inferno on plan9.
> the inferno's install.pdf is not comprehensive enough ( like your
> install notes)
Let me grab my chance right here. I get:
term% emu
; wm/wm
attachwindow: cannot handle window depth specifier x8r8g8b8
wmlib: can't allocate Display: initdisplay: /dev/draw/new: '/usr/inferno/dev/draw' file does not exist
;
and I can't imagine where to start attacking this problem.
Suggestions?
++L
^ permalink raw reply [flat|nested] 13+ messages in thread
* [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes)
2006-11-23 9:58 [9fans] My Plan9 setup notes prem
@ 2006-11-23 17:11 ` lucio
2007-01-28 11:41 ` Charles Forsyth
0 siblings, 1 reply; 13+ messages in thread
From: lucio @ 2006-11-23 17:11 UTC (permalink / raw)
To: 9fans
> As a newbie i also found difficulty in installing inferno on plan9.
> the inferno's install.pdf is not comprehensive enough ( like your
> install notes)
Let me grab my chance right here. I get:
term% emu
; wm/wm
attachwindow: cannot handle window depth specifier x8r8g8b8
wmlib: can't allocate Display: initdisplay: /dev/draw/new: '/usr/inferno/dev/draw' file does not exist
;
and I can't imagine where to start attacking this problem.
Suggestions?
++L
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2007-01-30 5:15 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-11-26 3:40 [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes) lucio
2006-11-26 4:41 ` Bruce Ellis
2006-11-26 5:00 ` Bruce Ellis
2006-11-26 5:11 ` Joel Salomon
2006-11-26 9:53 ` Federico Benavento
2006-11-26 16:25 ` Russ Cox
2006-11-27 8:31 ` Lucio De Re
2006-11-27 13:38 ` Chad Dougherty
2006-11-26 19:53 ` Charles Forsyth
2006-11-27 8:29 ` Lucio De Re
-- strict thread matches above, loose matches on Subject: below --
2006-11-23 9:58 [9fans] My Plan9 setup notes prem
2006-11-23 17:11 ` [9fans] Inferno under Plan 9 (Was: My Plan9 setup notes) lucio
2007-01-28 11:41 ` Charles Forsyth
2007-01-30 5:15 ` lucio
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).