[9fans] Update account

[9fans] Update account

[Erik Jahn]

Hello i've tried to 'pull' newest sources but i have problem with
authentication (message:authentication failed). I created yesterday account
'erikj2' but how could i find out if is it ready ? Or could it be some other
problem ? I checked with netstat if i am really connected - it's ok, dns, gateway
all works well.

Thank you,

Erik

Re: [9fans] Update account

[boyd, rounin]

create another one and try again.

i have two :) 'cos i forgot the password of the first one, but
then i realised it was obviously the password i use on plan 9.

Re: [9fans] Update account

[Erik Jahn]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="iso-8859-2:utf-8", Size: 258 bytes --]

Dne 31 èec 2003 boyd@insultant.net napsal(a):
> create another one and try again.
> 
> i have two :) 'cos i forgot the password of the first one, but
> then i realised it was obviously the password i use on plan 9.

This IS my second :-))) 

Erik

Re: [9fans] Update account

[Fco.J.Ballesteros]

[-- Attachment #1: Type: text/plain, Size: 48 bytes --]

Don't worry, I think I created three or so :-)

[-- Attachment #2: Type: message/rfc822, Size: 2455 bytes --]

From: Erik Jahn <erikj@volny.cz>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Update account
Date: Thu, 31 Jul 2003 12:14:01 +0200
Message-ID: <20030731101401.GC3856@myasci.pvk.cz>


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2.1: Type: text/plain; charset="iso-8859-2:utf-8", Size: 254 bytes --]

From: Erik Jahn <erikj@volny.cz>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Update account
Date: Thu, 31 Jul 2003 12:14:01 +0200
Message-ID: <20030731101401.GC3856@myasci.pvk.cz>

Dne 31 èec 2003 boyd@insultant.net napsal(a):
> create another one and try again.
> 
> i have two :) 'cos i forgot the password of the first one, but
> then i realised it was obviously the password i use on plan 9.

This IS my second :-))) 

Erik

Re: [9fans] Update account

[boyd, rounin]

> This IS my second :-)))

well i'm 9fs'd to it right now and it works fine.

9fs sources -- damn impressive.

ok, let me get another window ...

yup, works like charm.

then again, dan cross did all the hard work.  i'm just drawterm'd from paris to
his net
and 9fs'd to the labs.

Re: [9fans] Update account

[Dan Cross]

> then again, dan cross did all the hard work.  i'm just drawterm'd from
> paris to his net and 9fs'd to the labs.

Actually, I'd have to say that Russ did all the real hard work.  :-)

	- Dan C.

[9fans] Re: Update account

[Jim Choate]

On Thu, 31 Jul 2003, Erik Jahn wrote:

> Hello i've tried to 'pull' newest sources but i have problem with
> authentication (message:authentication failed). I created yesterday account
> 'erikj2' but how could i find out if is it ready ? Or could it be some other
> problem ? I checked with netstat if i am really connected - it's ok, dns, gateway
> all works well.

There is a variable delay from the time you create your account until it
is actually available. When you do the pull and it asks you for the
account and password and it works you then know things are well. What I
usually advise folks is do it the day before they decide on an install.

The question I have is how long before an account goes stale?...


 --
    ____________________________________________________________________

      We are all interested in the future for that is where you and I
      are going to spend the rest of our lives.

                              Criswell, "Plan 9 from Outer Space"

      ravage@ssz.com                            jchoate@open-forge.org
      www.ssz.com                               www.open-forge.org
    --------------------------------------------------------------------

Re: [9fans] Update account

[David Presotto]

[-- Attachment #1: Type: text/plain, Size: 315 bytes --]

They are ready as soon as you add them.  You might learn more
if you turn factotum debugging on:

1) create a window
2) in it 'echo debug > /mnt/factotum/ctl' then 'cat /dev/kprint'
3) try to pull and then send me the output from factotum.
4) finish with 'echo debug > /mnt/factotum/ctl' to turn debugging off

[-- Attachment #2: Type: message/rfc822, Size: 2340 bytes --]

From: Erik Jahn <erikj@volny.cz>
To: Plan 9 conf <9fans@cse.psu.edu>
Subject: [9fans] Update account
Date: Thu, 31 Jul 2003 11:56:09 +0200
Message-ID: <20030731095609.GB3856@myasci.pvk.cz>

Hello i've tried to 'pull' newest sources but i have problem with
authentication (message:authentication failed). I created yesterday account
'erikj2' but how could i find out if is it ready ? Or could it be some other
problem ? I checked with netstat if i am really connected - it's ok, dns, gateway
all works well.

Thank you,

Erik

Re: [9fans] Update account

[Jim Choate]

On Thu, 31 Jul 2003, David Presotto wrote:

> They are ready as soon as you add them.

I can say definitely that pull accounts are -not- ready as soon as you add
them. I've had to wait at least an hour in every case and sometime a day
or so. I'm not the only one who has noticed this behavior.


 --
    ____________________________________________________________________

      We are all interested in the future for that is where you and I
      are going to spend the rest of our lives.

                              Criswell, "Plan 9 from Outer Space"

      ravage@ssz.com                            jchoate@open-forge.org
      www.ssz.com                               www.open-forge.org
    --------------------------------------------------------------------

Re: [9fans] Update account

[Erik Jahn]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="iso-8859-2:utf-8", Size: 481 bytes --]

Dne 31 èec 2003 presotto@closedmind.org napsal(a):
> They are ready as soon as you add them.  You might learn more
> if you turn factotum debugging on:
> 
> 1) create a window
> 2) in it 'echo debug > /mnt/factotum/ctl' then 'cat /dev/kprint'
> 3) try to pull and then send me the output from factotum.
> 4) finish with 'echo debug > /mnt/factotum/ctl' to turn debugging off

output from debug ...failure - no auth server found for
outside.plan9.bell-labs.com

Erik

Re: [9fans] Update account

[Charles Forsyth]

[-- Attachment #1: Type: text/plain, Size: 155 bytes --]

if you haven't done so already, try adding the following line to your /lib/ndb/local

auth=sources.cs.bell-labs.com authdom=outside.plan9.bell-labs.com

[-- Attachment #2: Type: message/rfc822, Size: 2935 bytes --]

From: Erik Jahn <erikj@volny.cz>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Update account
Date: Fri, 1 Aug 2003 11:51:29 +0200
Message-ID: <20030801095129.GD1655@myasci.pvk.cz>


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2.1: Type: text/plain; charset="iso-8859-2:utf-8", Size: 477 bytes --]

From: Erik Jahn <erikj@volny.cz>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Update account
Date: Fri, 1 Aug 2003 11:51:29 +0200
Message-ID: <20030801095129.GD1655@myasci.pvk.cz>

Dne 31 èec 2003 presotto@closedmind.org napsal(a):
> They are ready as soon as you add them.  You might learn more
> if you turn factotum debugging on:
> 
> 1) create a window
> 2) in it 'echo debug > /mnt/factotum/ctl' then 'cat /dev/kprint'
> 3) try to pull and then send me the output from factotum.
> 4) finish with 'echo debug > /mnt/factotum/ctl' to turn debugging off

output from debug ...failure - no auth server found for
outside.plan9.bell-labs.com

Erik