From: Jonathan Gray <jsg@jsg.id.au>
To: Warner Losh <imp@bsdimp.com>
Cc: Paul Ruizendaal <pnr@planet.nl>,
tuhs@tuhs.org, segaloco <segaloco@protonmail.com>
Subject: [TUHS] Re: A few comments on porting the Bourne shell
Date: Sun, 1 Jan 2023 18:11:37 +1100 [thread overview]
Message-ID: <Y7EyKSHraDAIQDHD@largo.jsg.id.au> (raw)
In-Reply-To: <CANCZdfr57kJvxgK7HvgVr2YrOC51SG=qEyqn9nzMtsTKLBA0Yw@mail.gmail.com>
On Sat, Dec 31, 2022 at 10:25:49PM -0700, Warner Losh wrote:
> And at 5:18 he says he had a vax lab with three vaxen and the Lab's vax
> port didn't have virtual memory. Bill Joy with 3BSD which had virtual
> memory. They installed it on the vaxen because they were hitting physical
> memory limits for some of their programs....
>
> This suggests that the 32V in the TUHS archive is a later one than this
> early port. 3BSD is listed as being released end of 1979...
It was 4BSD and 1980 according to QCU:
"In 1980 it was Bill Joy who flew to New Jersey and, together with Steve
Bourne, put 4BSD up in Bell Labs. "We did it overnight," Joy told me.
"We decided to do it about 9 p.m.; people showed up in the morning and a
new os was running. It was pretty amazing."
next prev parent reply other threads:[~2023-01-01 7:12 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-30 18:25 [TUHS] " Paul Ruizendaal
2022-12-30 19:51 ` [TUHS] " Chet Ramey
2022-12-30 20:02 ` Larry McVoy
2022-12-30 20:31 ` Adam Thornton
2022-12-30 20:49 ` Chet Ramey
2022-12-30 20:42 ` Sven Mascheck
2022-12-30 20:48 ` Jon Steinhart
2022-12-30 20:51 ` Sven Mascheck
2022-12-31 11:40 ` Ralph Corderoy
2022-12-31 18:49 ` Jon Steinhart
2022-12-31 19:24 ` Clem Cole
2023-01-03 16:32 ` Chet Ramey
2023-01-01 1:51 ` Ron Natalie
2023-01-02 20:03 ` [TUHS] Command Line Editing in the Terminal Driver (Was: A few comments on porting the Bourne shell) Joseph Holsten
2023-01-02 20:33 ` [TUHS] Re: Command Line Editing in the Terminal Driver Lars Brinkhoff
2023-01-11 2:51 ` Chris Hanson
2023-01-11 3:53 ` Greg 'groggy' Lehey
2023-01-02 21:08 ` [TUHS] Re: Command Line Editing in the Terminal Driver (Was: A few comments on porting the Bourne shell) Rob Pike
2023-01-03 16:53 ` Marshall Conover
2023-01-04 9:18 ` Joseph Holsten
2023-01-11 2:56 ` Chris Hanson
2022-12-30 20:47 ` [TUHS] Re: A few comments on porting the Bourne shell Chet Ramey
2022-12-31 0:08 ` Luther Johnson
2022-12-31 3:59 ` Larry McVoy
2022-12-31 4:12 ` Steve Nickolas
2022-12-31 4:18 ` Bakul Shah
2022-12-31 4:40 ` Larry McVoy
2022-12-31 4:19 ` Marc Donner
2022-12-31 4:23 ` Dave Horsfall
2022-12-31 4:37 ` Clem Cole
2023-01-02 5:10 ` Mary Ann Horton
2023-01-02 16:25 ` Clem Cole
2023-01-02 16:51 ` Larry McVoy
2023-01-02 17:32 ` Adam Thornton
2023-01-02 17:43 ` Larry McVoy
2023-01-02 17:48 ` Luther Johnson
2023-01-02 18:00 ` G. Branden Robinson
2023-01-02 18:05 ` Luther Johnson
2023-01-02 18:12 ` Larry McVoy
2023-01-02 18:16 ` Clem Cole
2023-01-02 19:50 ` Warner Losh
2023-01-02 20:05 ` Adam Thornton
2023-01-02 19:21 ` G. Branden Robinson
2023-01-02 19:34 ` Rich Salz
2023-01-02 20:12 ` Larry McVoy
2023-01-02 20:24 ` G. Branden Robinson
2023-01-02 20:41 ` Larry McVoy
2023-01-02 21:00 ` Dan Cross
2023-01-02 21:06 ` Clem Cole
2023-01-02 21:19 ` Dan Cross
2023-01-02 22:54 ` segaloco via TUHS
2023-01-02 23:58 ` Jon Steinhart
2023-01-04 9:00 ` Joseph Holsten
2023-01-02 22:43 ` Steve Nickolas
2023-01-02 21:08 ` Joseph Holsten
2023-01-02 21:15 ` Adam Thornton
2023-01-02 17:55 ` Adam Thornton
2023-01-02 18:11 ` Clem Cole
2023-01-02 18:36 ` Dan Cross
2023-01-02 18:48 ` Dan Cross
2023-01-02 18:18 ` Larry McVoy
2023-01-04 3:20 ` John Cowan
2023-01-04 3:31 ` Dan Cross
2023-01-04 4:16 ` Bakul Shah
2023-01-04 16:15 ` Dan Cross
2023-01-04 18:28 ` ron minnich
2023-01-04 19:33 ` Chet Ramey
2023-01-04 15:21 ` Ralph Corderoy
2023-01-04 15:54 ` Ron Natalie
2023-01-02 17:55 ` Clem Cole
2023-01-03 17:08 ` Paul Winalski
2023-01-03 19:19 ` Warner Losh
2023-01-03 19:56 ` Luther Johnson
2023-01-03 20:21 ` Dave Horsfall
2023-01-03 21:47 ` Clem Cole
2023-01-03 21:51 ` Clem Cole
2022-12-31 4:41 ` Greg 'groggy' Lehey
2022-12-30 20:20 ` Sven Mascheck
2022-12-30 20:49 ` Ron Natalie
2022-12-30 20:52 ` Rob Pike
2022-12-30 20:53 ` Jon Steinhart
2023-01-01 10:44 ` arnold
2023-01-01 11:28 ` arnold
2023-01-03 16:34 ` Chet Ramey
2023-01-03 15:06 ` Chet Ramey
2022-12-30 19:57 ` segaloco via TUHS
2022-12-31 12:55 ` Paul Ruizendaal
2023-01-01 2:55 ` Warner Losh
2023-01-01 4:38 ` Jonathan Gray
2023-01-01 5:25 ` Warner Losh
2023-01-01 5:35 ` Dan Cross
2023-01-01 5:52 ` G. Branden Robinson
2023-01-01 6:35 ` Warner Losh
2023-01-01 6:35 ` Rob Pike
2023-01-01 6:27 ` Warner Losh
2023-01-01 14:50 ` Ron Natalie
2023-01-01 7:11 ` Jonathan Gray [this message]
2023-01-01 7:21 ` Warner Losh
2023-01-01 10:25 ` Paul Ruizendaal
2022-12-31 13:26 Douglas McIlroy
2022-12-31 22:19 ` Rob Pike
2023-01-03 15:08 Douglas McIlroy
2023-01-03 15:57 ` Alejandro Colomar
2023-01-03 17:19 ` Jon Steinhart
2023-01-05 13:22 ` Tom Ivar Helbekkmo via TUHS
2023-01-05 21:11 ` Rob Pike
2023-01-03 17:26 ` Dan Cross
2023-01-03 18:07 ` Steve Nickolas
2023-01-03 20:19 ` Steffen Nurpmeso
2023-01-03 23:03 ` ron minnich
2023-01-04 1:37 ` Bakul Shah
2023-01-04 1:58 ` Adam Thornton
2023-01-04 15:19 ` Ralph Corderoy
2023-01-04 18:01 ` Bakul Shah
2023-01-04 20:46 ` Alejandro Colomar
2023-01-05 0:06 ` John Cowan
2023-01-05 0:41 ` Adam Thornton
2023-01-04 5:05 ` Theodore Ts'o
2023-01-03 18:19 ` Niklas Karlsson
2023-01-04 1:29 ` Adam Thornton
2023-01-05 1:51 ` Alejandro Colomar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y7EyKSHraDAIQDHD@largo.jsg.id.au \
--to=jsg@jsg.id.au \
--cc=imp@bsdimp.com \
--cc=pnr@planet.nl \
--cc=segaloco@protonmail.com \
--cc=tuhs@tuhs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).