* [PR PATCH] pipewire: add support for aptx and aac
@ 2021-01-24 13:30 paper42
2021-01-24 13:47 ` [PR PATCH] [Updated] " paper42
` (8 more replies)
0 siblings, 9 replies; 10+ messages in thread
From: paper42 @ 2021-01-24 13:30 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1620 bytes --]
There is a new pull request by paper42 against master on the void-packages repository
https://github.com/paper42/void-packages pipewire-aptx-aac
https://github.com/void-linux/void-packages/pull/28145
pipewire: add support for aptx and aac
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
@st3r4g
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/28145.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-aptx-aac-28145.patch --]
[-- Type: text/x-diff, Size: 2892 bytes --]
From 22b7d0a9453d02bf0e0d2e439c8a4174374aed09 Mon Sep 17 00:00:00 2001
From: Paper <paper@tilde.institute>
Date: Sun, 24 Jan 2021 14:22:01 +0100
Subject: [PATCH 1/2] New package: libopenaptx-0.2.0.
---
srcpkgs/libopenaptx-devel | 1 +
srcpkgs/libopenaptx/template | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 120000 srcpkgs/libopenaptx-devel
create mode 100644 srcpkgs/libopenaptx/template
diff --git a/srcpkgs/libopenaptx-devel b/srcpkgs/libopenaptx-devel
new file mode 120000
index 00000000000..2791f43ede1
--- /dev/null
+++ b/srcpkgs/libopenaptx-devel
@@ -0,0 +1 @@
+libopenaptx
\ No newline at end of file
diff --git a/srcpkgs/libopenaptx/template b/srcpkgs/libopenaptx/template
new file mode 100644
index 00000000000..9235261e6b0
--- /dev/null
+++ b/srcpkgs/libopenaptx/template
@@ -0,0 +1,21 @@
+# Template file for 'libopenaptx'
+pkgname=libopenaptx
+version=0.2.0
+revision=1
+build_style=gnu-makefile
+short_desc="Open Source implementation of Audio Processing Technology codec (aptX)"
+maintainer="Paper <paper@tilde.institute>"
+license="LGPL-2.1"
+homepage="https://github.com/pali/libopenaptx/"
+distfiles="https://github.com/pali/libopenaptx/releases/download/0.2.0/libopenaptx-0.2.0.tar.gz"
+checksum=51a13a34bb188a87ab1deb64a090ab42a4755d7b02c2bdaf3b8136f749b71b84
+
+libopenaptx-devel_package() {
+ depends="libopenaptx>=${version}_${revision}"
+ short_desc+=" - development files"
+ pkg_install() {
+ vmove usr/include
+ vmove usr/lib/pkgconfig
+ vmove usr/lib/*.so
+ }
+}
From 759b1a73df23e8187322c824ead973fc2d75f103 Mon Sep 17 00:00:00 2001
From: Paper <paper@tilde.institute>
Date: Sun, 24 Jan 2021 14:22:45 +0100
Subject: [PATCH 2/2] pipewire: add support for aptx and aac
---
srcpkgs/pipewire/template | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 79a4d0e28b5..ff6b72147ee 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,14 +1,15 @@
# Template file for 'pipewire'
pkgname=pipewire
version=0.3.20
-revision=1
+revision=2
build_style=meson
configure_args="-Dman=true -Dgstreamer=true -Ddocs=true -Dsystemd=false
-Dbluez5=true -Dffmpeg=true -Dpipewire-alsa=true -Dpipewire-jack=true
-Dudevrulesdir=/usr/lib/udev/rules.d"
-hostmakedepends="doxygen graphviz pkg-config xmltoman"
+hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel"
+ sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
+ libopenaptx-devel fdk-aac-devel"
depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
short_desc="Server and user space API to deal with multimedia pipelines"
maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PR PATCH] [Updated] pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
@ 2021-01-24 13:47 ` paper42
2021-01-24 14:26 ` st3r4g
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: paper42 @ 2021-01-24 13:47 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1625 bytes --]
There is an updated pull request by paper42 against master on the void-packages repository
https://github.com/paper42/void-packages pipewire-aptx-aac
https://github.com/void-linux/void-packages/pull/28145
pipewire: add support for aptx and aac
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
@st3r4g
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/28145.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-aptx-aac-28145.patch --]
[-- Type: text/x-diff, Size: 3293 bytes --]
From ab52861a9ce9ebedb1636b211ddd1a10dd23fedc Mon Sep 17 00:00:00 2001
From: Paper <paper@tilde.institute>
Date: Sun, 24 Jan 2021 14:22:01 +0100
Subject: [PATCH 1/2] New package: libopenaptx-0.2.0.
---
common/shlibs | 1 +
srcpkgs/libopenaptx-devel | 1 +
srcpkgs/libopenaptx/template | 21 +++++++++++++++++++++
3 files changed, 23 insertions(+)
create mode 120000 srcpkgs/libopenaptx-devel
create mode 100644 srcpkgs/libopenaptx/template
diff --git a/common/shlibs b/common/shlibs
index 8c6b5d9d014..e8d28aed488 100644
--- a/common/shlibs
+++ b/common/shlibs
@@ -4044,3 +4044,4 @@ libutil-cmdline-samba4.so samba-libs-4.13.2_1
libwinbind-client-samba4.so samba-libs-4.13.2_1
libsixel.so.1 libsixel-1.8.6_1
libpamtest.so.0 pam_wrapper-1.1.3_1
+libopenaptx.so.0 libopenaptx-0.2.0_1
diff --git a/srcpkgs/libopenaptx-devel b/srcpkgs/libopenaptx-devel
new file mode 120000
index 00000000000..2791f43ede1
--- /dev/null
+++ b/srcpkgs/libopenaptx-devel
@@ -0,0 +1 @@
+libopenaptx
\ No newline at end of file
diff --git a/srcpkgs/libopenaptx/template b/srcpkgs/libopenaptx/template
new file mode 100644
index 00000000000..aaa4b430a5c
--- /dev/null
+++ b/srcpkgs/libopenaptx/template
@@ -0,0 +1,21 @@
+# Template file for 'libopenaptx'
+pkgname=libopenaptx
+version=0.2.0
+revision=1
+build_style=gnu-makefile
+short_desc="Open Source implementation of Audio Processing Technology codec (aptX)"
+maintainer="Paper <paper@tilde.institute>"
+license="LGPL-2.1-or-later"
+homepage="https://github.com/pali/libopenaptx/"
+distfiles="https://github.com/pali/libopenaptx/releases/download/${version}/libopenaptx-${version}.tar.gz"
+checksum=51a13a34bb188a87ab1deb64a090ab42a4755d7b02c2bdaf3b8136f749b71b84
+
+libopenaptx-devel_package() {
+ depends="libopenaptx>=${version}_${revision}"
+ short_desc+=" - development files"
+ pkg_install() {
+ vmove usr/include
+ vmove usr/lib/pkgconfig
+ vmove usr/lib/*.so
+ }
+}
From 98e8dbb0d867af08f746130204ea578eb86908e8 Mon Sep 17 00:00:00 2001
From: Paper <paper@tilde.institute>
Date: Sun, 24 Jan 2021 14:47:46 +0100
Subject: [PATCH 2/2] pipewire: add support for aptx and aac
---
srcpkgs/pipewire/template | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 79a4d0e28b5..ff6b72147ee 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,14 +1,15 @@
# Template file for 'pipewire'
pkgname=pipewire
version=0.3.20
-revision=1
+revision=2
build_style=meson
configure_args="-Dman=true -Dgstreamer=true -Ddocs=true -Dsystemd=false
-Dbluez5=true -Dffmpeg=true -Dpipewire-alsa=true -Dpipewire-jack=true
-Dudevrulesdir=/usr/lib/udev/rules.d"
-hostmakedepends="doxygen graphviz pkg-config xmltoman"
+hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel"
+ sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
+ libopenaptx-devel fdk-aac-devel"
depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
short_desc="Server and user space API to deal with multimedia pipelines"
maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
2021-01-24 13:47 ` [PR PATCH] [Updated] " paper42
@ 2021-01-24 14:26 ` st3r4g
2021-01-24 14:28 ` paper42
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: st3r4g @ 2021-01-24 14:26 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 286 bytes --]
New comment by st3r4g on void-packages repository
https://github.com/void-linux/void-packages/pull/28145#issuecomment-766356712
Comment:
These are for bluetooth right? I don't use it myself. There is an opt dependency on the "ldac" code too, but I don't think it is already packaged.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
2021-01-24 13:47 ` [PR PATCH] [Updated] " paper42
2021-01-24 14:26 ` st3r4g
@ 2021-01-24 14:28 ` paper42
2021-01-24 14:29 ` st3r4g
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: paper42 @ 2021-01-24 14:28 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 276 bytes --]
New comment by paper42 on void-packages repository
https://github.com/void-linux/void-packages/pull/28145#issuecomment-766357035
Comment:
Yes, those are bluetooth codecs. LDAC is specific to Sony devices afaik, so I can not test it and I don't care about it much right now.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
` (2 preceding siblings ...)
2021-01-24 14:28 ` paper42
@ 2021-01-24 14:29 ` st3r4g
2021-01-26 2:16 ` [PR REVIEW] " ericonr
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: st3r4g @ 2021-01-24 14:29 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 280 bytes --]
New comment by st3r4g on void-packages repository
https://github.com/void-linux/void-packages/pull/28145#issuecomment-766356712
Comment:
These are for bluetooth right? I don't use it. There is an opt dependency on the "ldac" codec too, but I don't think it is already packaged.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PR REVIEW] pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
` (4 preceding siblings ...)
2021-01-26 2:16 ` [PR REVIEW] " ericonr
@ 2021-01-26 2:16 ` ericonr
2021-01-26 2:16 ` ericonr
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: ericonr @ 2021-01-26 2:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 220 bytes --]
New review comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28145#discussion_r564169571
Comment:
Could you mention in the commit message that this also adds translations?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PR REVIEW] pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
` (3 preceding siblings ...)
2021-01-24 14:29 ` st3r4g
@ 2021-01-26 2:16 ` ericonr
2021-01-26 2:16 ` ericonr
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: ericonr @ 2021-01-26 2:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 189 bytes --]
New review comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28145#discussion_r564170013
Comment:
```suggestion
vmove "usr/lib/*.so"
```
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PR REVIEW] pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
` (5 preceding siblings ...)
2021-01-26 2:16 ` ericonr
@ 2021-01-26 2:16 ` ericonr
2021-01-27 18:54 ` [PR PATCH] [Updated] " paper42
2021-01-28 3:46 ` [PR PATCH] [Merged]: " ericonr
8 siblings, 0 replies; 10+ messages in thread
From: ericonr @ 2021-01-26 2:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 242 bytes --]
New review comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28145#discussion_r564169815
Comment:
Might make sense to leave a comment about the possibility of adding LDAC support when packaged?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PR PATCH] [Updated] pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
` (6 preceding siblings ...)
2021-01-26 2:16 ` ericonr
@ 2021-01-27 18:54 ` paper42
2021-01-28 3:46 ` [PR PATCH] [Merged]: " ericonr
8 siblings, 0 replies; 10+ messages in thread
From: paper42 @ 2021-01-27 18:54 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1625 bytes --]
There is an updated pull request by paper42 against master on the void-packages repository
https://github.com/paper42/void-packages pipewire-aptx-aac
https://github.com/void-linux/void-packages/pull/28145
pipewire: add support for aptx and aac
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
@st3r4g
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/28145.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pipewire-aptx-aac-28145.patch --]
[-- Type: text/x-diff, Size: 3358 bytes --]
From f045e46fd2189f5497694422d713e28fb12352df Mon Sep 17 00:00:00 2001
From: Paper <paper@tilde.institute>
Date: Wed, 27 Jan 2021 19:52:21 +0100
Subject: [PATCH 1/2] New package: libopenaptx-0.2.0.
---
common/shlibs | 1 +
srcpkgs/libopenaptx-devel | 1 +
srcpkgs/libopenaptx/template | 21 +++++++++++++++++++++
3 files changed, 23 insertions(+)
create mode 120000 srcpkgs/libopenaptx-devel
create mode 100644 srcpkgs/libopenaptx/template
diff --git a/common/shlibs b/common/shlibs
index 8c6b5d9d014..e8d28aed488 100644
--- a/common/shlibs
+++ b/common/shlibs
@@ -4044,3 +4044,4 @@ libutil-cmdline-samba4.so samba-libs-4.13.2_1
libwinbind-client-samba4.so samba-libs-4.13.2_1
libsixel.so.1 libsixel-1.8.6_1
libpamtest.so.0 pam_wrapper-1.1.3_1
+libopenaptx.so.0 libopenaptx-0.2.0_1
diff --git a/srcpkgs/libopenaptx-devel b/srcpkgs/libopenaptx-devel
new file mode 120000
index 00000000000..2791f43ede1
--- /dev/null
+++ b/srcpkgs/libopenaptx-devel
@@ -0,0 +1 @@
+libopenaptx
\ No newline at end of file
diff --git a/srcpkgs/libopenaptx/template b/srcpkgs/libopenaptx/template
new file mode 100644
index 00000000000..0f07b0b1a25
--- /dev/null
+++ b/srcpkgs/libopenaptx/template
@@ -0,0 +1,21 @@
+# Template file for 'libopenaptx'
+pkgname=libopenaptx
+version=0.2.0
+revision=1
+build_style=gnu-makefile
+short_desc="Open Source implementation of Audio Processing Technology codec (aptX)"
+maintainer="Paper <paper@tilde.institute>"
+license="LGPL-2.1-or-later"
+homepage="https://github.com/pali/libopenaptx/"
+distfiles="https://github.com/pali/libopenaptx/releases/download/${version}/libopenaptx-${version}.tar.gz"
+checksum=51a13a34bb188a87ab1deb64a090ab42a4755d7b02c2bdaf3b8136f749b71b84
+
+libopenaptx-devel_package() {
+ depends="libopenaptx>=${version}_${revision}"
+ short_desc+=" - development files"
+ pkg_install() {
+ vmove usr/include
+ vmove usr/lib/pkgconfig
+ vmove "usr/lib/*.so"
+ }
+}
From cc7242e0ff22a0e44b7b252d959e144a01cfc1cd Mon Sep 17 00:00:00 2001
From: Paper <paper@tilde.institute>
Date: Wed, 27 Jan 2021 19:52:42 +0100
Subject: [PATCH 2/2] pipewire: support aac, aptx, add translations
---
srcpkgs/pipewire/template | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/srcpkgs/pipewire/template b/srcpkgs/pipewire/template
index 79a4d0e28b5..e39d7ab0511 100644
--- a/srcpkgs/pipewire/template
+++ b/srcpkgs/pipewire/template
@@ -1,14 +1,16 @@
# Template file for 'pipewire'
pkgname=pipewire
version=0.3.20
-revision=1
+revision=2
build_style=meson
configure_args="-Dman=true -Dgstreamer=true -Ddocs=true -Dsystemd=false
-Dbluez5=true -Dffmpeg=true -Dpipewire-alsa=true -Dpipewire-jack=true
-Dudevrulesdir=/usr/lib/udev/rules.d"
-hostmakedepends="doxygen graphviz pkg-config xmltoman"
+hostmakedepends="doxygen graphviz pkg-config xmltoman gettext"
+# LDAC support can be enabled when ldacbt is packaged
makedepends="SDL2-devel ffmpeg-devel gst-plugins-base1-devel jack-devel
- sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel"
+ sbc-devel v4l-utils-devel libva-devel libbluetooth-devel ncurses-devel
+ libopenaptx-devel fdk-aac-devel"
depends="libspa-alsa libspa-audioconvert libspa-audiomixer libspa-control"
short_desc="Server and user space API to deal with multimedia pipelines"
maintainer="Kridsada Thanabulpong <sirn@ogsite.net>"
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PR PATCH] [Merged]: pipewire: add support for aptx and aac
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
` (7 preceding siblings ...)
2021-01-27 18:54 ` [PR PATCH] [Updated] " paper42
@ 2021-01-28 3:46 ` ericonr
8 siblings, 0 replies; 10+ messages in thread
From: ericonr @ 2021-01-28 3:46 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1459 bytes --]
There's a merged pull request on the void-packages repository
pipewire: add support for aptx and aac
https://github.com/void-linux/void-packages/pull/28145
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
@st3r4g
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-01-28 3:46 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-24 13:30 [PR PATCH] pipewire: add support for aptx and aac paper42
2021-01-24 13:47 ` [PR PATCH] [Updated] " paper42
2021-01-24 14:26 ` st3r4g
2021-01-24 14:28 ` paper42
2021-01-24 14:29 ` st3r4g
2021-01-26 2:16 ` [PR REVIEW] " ericonr
2021-01-26 2:16 ` ericonr
2021-01-26 2:16 ` ericonr
2021-01-27 18:54 ` [PR PATCH] [Updated] " paper42
2021-01-28 3:46 ` [PR PATCH] [Merged]: " ericonr
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).