* Re: volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
@ 2021-02-17 14:04 ` ericonr
2021-02-17 14:21 ` [PR PATCH] [Updated] " teldra
` (14 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-02-17 14:04 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 288 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28806#issuecomment-780577890
Comment:
> Unable to init server: Could not connect: Connection refused
This looks like it's looking for X server. Maybe use `xvfb-run dbus-run-session`?
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
2021-02-17 14:04 ` ericonr
@ 2021-02-17 14:21 ` teldra
2021-02-17 14:37 ` teldra
` (13 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-17 14:21 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1369 bytes --]
From 8e2f30709174763d64bf4ff0c8432bfc51f623c2 Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..d3bce8dffdf 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,18 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio gtk+3 xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
2021-02-17 14:04 ` ericonr
2021-02-17 14:21 ` [PR PATCH] [Updated] " teldra
@ 2021-02-17 14:37 ` teldra
2021-02-17 14:49 ` teldra
` (12 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-17 14:37 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1503 bytes --]
From 8a5a79bb5a65ae0424000669da6dba64e6c4d5dc Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..5506ed93723 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,22 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio gtk+3 xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+post_extract() {
+ vsed -i "/^from gi.repository import Gtk.*/i import gi\ngi.require_version('Gtk', '3.0')" volctl/meta.py
+}
+
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (2 preceding siblings ...)
2021-02-17 14:37 ` teldra
@ 2021-02-17 14:49 ` teldra
2021-02-17 14:54 ` teldra
` (11 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-17 14:49 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1372 bytes --]
From d78c70c576a24b3b45f107c59aef87c2e2e21fe3 Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..664cc836529 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,19 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio gtk+3 xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (3 preceding siblings ...)
2021-02-17 14:49 ` teldra
@ 2021-02-17 14:54 ` teldra
2021-02-17 14:58 ` teldra
` (10 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-17 14:54 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1503 bytes --]
From aca47d2c34ca28257fc913977fd3c9258807e84f Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..5506ed93723 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,22 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio gtk+3 xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+post_extract() {
+ vsed -i "/^from gi.repository import Gtk.*/i import gi\ngi.require_version('Gtk', '3.0')" volctl/meta.py
+}
+
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (4 preceding siblings ...)
2021-02-17 14:54 ` teldra
@ 2021-02-17 14:58 ` teldra
2021-02-18 4:54 ` [PR REVIEW] " ericonr
` (9 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-17 14:58 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 759 bytes --]
New comment by teldra on void-packages repository
https://github.com/void-linux/void-packages/pull/28806#issuecomment-780613503
Comment:
> This looks like it's looking for X server. Maybe use `xvfb-run dbus-run-session`?
Yes that did the Trick.
Now the funny parts:
- No tests were executed. Should I instead add `do_check() { : }`? https://github.com/void-linux/void-packages/pull/28806/checks?check_run_id=1919520285#step:8:108
- Right now, I had to add `post_extract()`. Without it, this happens:
```
/builddir/volctl-0.8.2/volctl/meta.py:2: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.
from gi.repository import Gtk
```
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR REVIEW] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (5 preceding siblings ...)
2021-02-17 14:58 ` teldra
@ 2021-02-18 4:54 ` ericonr
2021-02-18 4:54 ` ericonr
` (8 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-02-18 4:54 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 447 bytes --]
New review comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28806#discussion_r578131916
Comment:
Well, this at least guarantees we can import the whole thing, I guess.
If they ever add tests, we'll be ready to run them :D
Maybe add a comment that currently no tests are defined? I definitely think `do_check` should remain like this. Possiby change `python` to explicit `python3` there too,
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR REVIEW] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (6 preceding siblings ...)
2021-02-18 4:54 ` [PR REVIEW] " ericonr
@ 2021-02-18 4:54 ` ericonr
2021-02-18 4:54 ` ericonr
` (7 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-02-18 4:54 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 213 bytes --]
New review comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28806#discussion_r578132157
Comment:
This makes me think that maybe it should depend on `gtk+3` itself?
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR REVIEW] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (7 preceding siblings ...)
2021-02-18 4:54 ` ericonr
@ 2021-02-18 4:54 ` ericonr
2021-02-19 9:17 ` [PR PATCH] [Updated] " teldra
` (6 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-02-18 4:54 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 297 bytes --]
New review comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/28806#discussion_r578131618
Comment:
If the warning doesn't affect the build, I'd prefer to leave this out. Might be nice to ask upstream to fix on their side, though (or send them a PR).
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (8 preceding siblings ...)
2021-02-18 4:54 ` ericonr
@ 2021-02-19 9:17 ` teldra
2021-02-19 9:24 ` teldra
` (5 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-19 9:17 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1453 bytes --]
From c1cb6a97121558f6e2176eb677cd0ecc57a61f66 Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..294de567a6f 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,19 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject gtk+3 desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+# There are no tests definded. If they ever add tests, we'll be ready to run them
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (9 preceding siblings ...)
2021-02-19 9:17 ` [PR PATCH] [Updated] " teldra
@ 2021-02-19 9:24 ` teldra
2021-02-19 10:33 ` teldra
` (4 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-19 9:24 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1453 bytes --]
From 0a6ad00705c1b45ae5c18d52dc40edc6f1e5f69f Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..294de567a6f 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,19 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject gtk+3 desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+# There are no tests definded. If they ever add tests, we'll be ready to run them
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (10 preceding siblings ...)
2021-02-19 9:24 ` teldra
@ 2021-02-19 10:33 ` teldra
2021-02-22 19:10 ` teldra
` (3 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-19 10:33 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1453 bytes --]
From 19dd774c27fd6b97b6a6d68b0c9059919e79addc Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..294de567a6f 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,19 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject gtk+3 desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+# There are no tests definded. If they ever add tests, we'll be ready to run them
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Updated] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (11 preceding siblings ...)
2021-02-19 10:33 ` teldra
@ 2021-02-22 19:10 ` teldra
2021-02-22 19:16 ` [PR REVIEW] " teldra
` (2 subsequent siblings)
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-22 19:10 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
There is an updated pull request by teldra against master on the void-packages repository
https://github.com/teldra/void-packages update-volctl
https://github.com/void-linux/void-packages/pull/28806
volctl: update to 0.8.2.
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
A patch file from https://github.com/void-linux/void-packages/pull/28806.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-update-volctl-28806.patch --]
[-- Type: text/x-diff, Size: 1453 bytes --]
From d67360efdd6666424dc626de6a3b576bb8714c1e Mon Sep 17 00:00:00 2001
From: teldra <teldra@rotce.de>
Date: Wed, 17 Feb 2021 00:45:20 +0100
Subject: [PATCH] volctl: update to 0.8.2.
---
srcpkgs/volctl/template | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/srcpkgs/volctl/template b/srcpkgs/volctl/template
index 0b4dc7d4409..294de567a6f 100644
--- a/srcpkgs/volctl/template
+++ b/srcpkgs/volctl/template
@@ -1,13 +1,19 @@
# Template file for 'volctl'
pkgname=volctl
-version=0.8.0
-revision=2
+version=0.8.2
+revision=1
build_style=python3-module
hostmakedepends="python3-setuptools"
-depends="python3-gobject desktop-file-utils"
-short_desc="Lightweight volume control for pulseaudio that sits in your systray"
+depends="python3-gobject gtk+3 desktop-file-utils python3-cairo python3-yaml python3-click"
+checkdepends="${depends} dbus pulseaudio xvfb-run"
+short_desc="Lightweight volume control for pulseaudio in your systray"
maintainer="teldra <teldra@rotce.de>"
license="GPL-2.0-only"
homepage="https://buzz.github.io/volctl/"
distfiles="https://github.com/buzz/volctl/archive/v${version}.tar.gz"
-checksum=01d021f244982a8bc827574f778a49864e937ca53310e03ec1386587bf8fb9b4
+checksum=8e744fe0e92f00451983e4fffa079d4d5354a8f96f6bcf8d15da44a18dc556f5
+
+# There are no tests definded. If they ever add tests, we'll be ready to run them
+do_check() {
+ xvfb-run dbus-run-session python setup.py test
+}
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR REVIEW] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (12 preceding siblings ...)
2021-02-22 19:10 ` teldra
@ 2021-02-22 19:16 ` teldra
2021-02-22 19:16 ` teldra
2021-02-22 19:21 ` [PR PATCH] [Merged]: " ericonr
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-22 19:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 181 bytes --]
New review comment by teldra on void-packages repository
https://github.com/void-linux/void-packages/pull/28806#discussion_r580522065
Comment:
This seems to not affect the build.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR REVIEW] volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (13 preceding siblings ...)
2021-02-22 19:16 ` [PR REVIEW] " teldra
@ 2021-02-22 19:16 ` teldra
2021-02-22 19:21 ` [PR PATCH] [Merged]: " ericonr
15 siblings, 0 replies; 17+ messages in thread
From: teldra @ 2021-02-22 19:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 152 bytes --]
New review comment by teldra on void-packages repository
https://github.com/void-linux/void-packages/pull/28806#discussion_r580522182
Comment:
Moved.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PR PATCH] [Merged]: volctl: update to 0.8.2.
2021-02-16 23:50 [PR PATCH] volctl: update to 0.8.2 teldra
` (14 preceding siblings ...)
2021-02-22 19:16 ` teldra
@ 2021-02-22 19:21 ` ericonr
15 siblings, 0 replies; 17+ messages in thread
From: ericonr @ 2021-02-22 19:21 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1685 bytes --]
There's a merged pull request on the void-packages repository
volctl: update to 0.8.2.
https://github.com/void-linux/void-packages/pull/28806
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
#### Notes
Even if I add `dbus-run-session python setup.py test` to `do_check`, I get
```
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
```
and I don't have a clue, what to do.
^ permalink raw reply [flat|nested] 17+ messages in thread