* [PR PATCH] New package: pleaser-0.4.1
@ 2021-06-11 21:14 edneville
2021-06-11 23:39 ` [PR REVIEW] " abenson
` (14 more replies)
0 siblings, 15 replies; 16+ messages in thread
From: edneville @ 2021-06-11 21:14 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1691 bytes --]
There is a new pull request by edneville against master on the void-packages repository
https://github.com/edneville/void-packages pleaser-0.4.1
https://github.com/void-linux/void-packages/pull/31430
New package: pleaser-0.4.1
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
-->
This was previously raised in #27037 but has since been reviewed by the SUSE security team.
A patch file from https://github.com/void-linux/void-packages/pull/31430.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pleaser-0.4.1-31430.patch --]
[-- Type: text/x-diff, Size: 1963 bytes --]
From a9c2fe5812844b132518a10a32764ad7600b1c32 Mon Sep 17 00:00:00 2001
From: ed neville <ed@s5h.net>
Date: Fri, 11 Jun 2021 20:33:09 +0000
Subject: [PATCH] New package: pleaser-0.4.1
---
srcpkgs/pleaser/files/please.pam | 4 ++++
srcpkgs/pleaser/template | 31 +++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+)
create mode 100644 srcpkgs/pleaser/files/please.pam
create mode 100644 srcpkgs/pleaser/template
diff --git a/srcpkgs/pleaser/files/please.pam b/srcpkgs/pleaser/files/please.pam
new file mode 100644
index 000000000000..10a4824b56e0
--- /dev/null
+++ b/srcpkgs/pleaser/files/please.pam
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth include system-auth
+account include system-auth
+session include system-auth
diff --git a/srcpkgs/pleaser/template b/srcpkgs/pleaser/template
new file mode 100644
index 000000000000..c64ef15fa8f1
--- /dev/null
+++ b/srcpkgs/pleaser/template
@@ -0,0 +1,31 @@
+# Template file for 'pleaser'
+pkgname=pleaser
+_binary=please
+version=0.4.1
+revision=1
+wrksrc="${_binary}-v${version}"
+build_style=cargo
+makedepends="cmake llvm clang pam-devel"
+short_desc="Polite and easy to configure regex-first sudo alternative"
+maintainer="Ed Neville <ed@s5h.net>"
+license="GPL-3.0-or-later"
+homepage="https://www.usenix.org.uk/content/please.html"
+distfiles="https://gitlab.com/edneville/${_binary}/-/archive/v${version}/${_binary}-v${version}.tar.gz"
+checksum=0c81449d57a6bbbf1577d6474349f845e9a8c7a074b27fd1a4ef119ccd4f3c64
+
+pre_build() {
+ export CFLAGS_${RUST_BUILD//-/_}="${CFLAGS_host}"
+ export CC_${RUST_BUILD//-/_}="${BUILD_CC}"
+}
+
+post_install() {
+ local manpage
+ vdoc README.md
+ manpage=$(find ${wrksrc} -name please.ini.5)
+ vman ${manpage}
+ manpage=$(find ${wrksrc} -name please.1)
+ vman ${manpage}
+ vinstall ${FILESDIR}/please.pam 644 etc/pam.d please
+ vinstall ${FILESDIR}/please.pam 644 etc/pam.d pleaseedit
+ chmod 4755 $DESTDIR/usr/bin/please $DESTDIR/usr/bin/pleaseedit
+}
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR REVIEW] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
@ 2021-06-11 23:39 ` abenson
2021-06-11 23:39 ` abenson
` (13 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: abenson @ 2021-06-11 23:39 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 177 bytes --]
New review comment by abenson on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#discussion_r650311274
Comment:
Why not just call it `please`?
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR REVIEW] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
2021-06-11 23:39 ` [PR REVIEW] " abenson
@ 2021-06-11 23:39 ` abenson
2021-06-11 23:40 ` abenson
` (12 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: abenson @ 2021-06-11 23:39 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 190 bytes --]
New review comment by abenson on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#discussion_r650311302
Comment:
> `cmake llvm clang`
These aren't needed
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR REVIEW] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
2021-06-11 23:39 ` [PR REVIEW] " abenson
2021-06-11 23:39 ` abenson
@ 2021-06-11 23:40 ` abenson
2021-06-11 23:43 ` abenson
` (11 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: abenson @ 2021-06-11 23:40 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 185 bytes --]
New review comment by abenson on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#discussion_r650311544
Comment:
I'm not sure these are needed, either.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR REVIEW] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (2 preceding siblings ...)
2021-06-11 23:40 ` abenson
@ 2021-06-11 23:43 ` abenson
2021-06-11 23:45 ` abenson
` (10 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: abenson @ 2021-06-11 23:43 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 214 bytes --]
New review comment by abenson on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#discussion_r650312200
Comment:
I'd prefer it just be `vman man/please.ini.5` instead of using find
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR REVIEW] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (3 preceding siblings ...)
2021-06-11 23:43 ` abenson
@ 2021-06-11 23:45 ` abenson
2021-06-12 8:33 ` [PR PATCH] [Updated] " edneville
` (9 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: abenson @ 2021-06-11 23:45 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 185 bytes --]
New review comment by abenson on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#discussion_r650312455
Comment:
Indent with a tab instead of the space
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR PATCH] [Updated] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (4 preceding siblings ...)
2021-06-11 23:45 ` abenson
@ 2021-06-12 8:33 ` edneville
2021-06-12 8:56 ` edneville
` (8 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: edneville @ 2021-06-12 8:33 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1696 bytes --]
There is an updated pull request by edneville against master on the void-packages repository
https://github.com/edneville/void-packages pleaser-0.4.1
https://github.com/void-linux/void-packages/pull/31430
New package: pleaser-0.4.1
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
-->
This was previously raised in #27037 but has since been reviewed by the SUSE security team.
A patch file from https://github.com/void-linux/void-packages/pull/31430.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pleaser-0.4.1-31430.patch --]
[-- Type: text/x-diff, Size: 1798 bytes --]
From d9388f43669da70257791bd7251478ddb0800112 Mon Sep 17 00:00:00 2001
From: ed neville <ed@s5h.net>
Date: Fri, 11 Jun 2021 20:33:09 +0000
Subject: [PATCH] New package: please-0.4.1
---
srcpkgs/please/files/please.pam | 4 ++++
srcpkgs/please/template | 28 ++++++++++++++++++++++++++++
2 files changed, 32 insertions(+)
create mode 100644 srcpkgs/please/files/please.pam
create mode 100644 srcpkgs/please/template
diff --git a/srcpkgs/please/files/please.pam b/srcpkgs/please/files/please.pam
new file mode 100644
index 000000000000..10a4824b56e0
--- /dev/null
+++ b/srcpkgs/please/files/please.pam
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth include system-auth
+account include system-auth
+session include system-auth
diff --git a/srcpkgs/please/template b/srcpkgs/please/template
new file mode 100644
index 000000000000..118b5f7e0afc
--- /dev/null
+++ b/srcpkgs/please/template
@@ -0,0 +1,28 @@
+# Template file for 'pleaser'
+pkgname=please
+_binary=please
+version=0.4.1
+revision=1
+wrksrc="${_binary}-v${version}"
+build_style=cargo
+makedepends="pam-devel"
+short_desc="Polite and easy to configure regex-first sudo alternative "
+maintainer="Ed Neville <ed@s5h.net>"
+license="GPL-3.0-or-later"
+homepage="https://www.usenix.org.uk/content/please.html"
+distfiles="https://gitlab.com/edneville/${_binary}/-/archive/v${version}/${_binary}-v${version}.tar.gz"
+checksum=0c81449d57a6bbbf1577d6474349f845e9a8c7a074b27fd1a4ef119ccd4f3c64
+
+pre_build() {
+ export CC_${RUST_BUILD//-/_}="${BUILD_CC}"
+}
+
+post_install() {
+ local manpage
+ vdoc README.md
+ vman man/please.ini.5
+ vman man/please.1
+ vinstall ${FILESDIR}/please.pam 644 etc/pam.d please
+ vinstall ${FILESDIR}/please.pam 644 etc/pam.d pleaseedit
+ chmod 4755 $DESTDIR/usr/bin/please $DESTDIR/usr/bin/pleaseedit
+}
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (5 preceding siblings ...)
2021-06-12 8:33 ` [PR PATCH] [Updated] " edneville
@ 2021-06-12 8:56 ` edneville
2021-06-12 19:53 ` [PR REVIEW] " abenson
` (7 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: edneville @ 2021-06-12 8:56 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 439 bytes --]
New comment by edneville on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#issuecomment-860023893
Comment:
On 2021-06-11 16:39-0700, Andrew Benson wrote:
> +pkgname=pleaser
>
> Why not just call it `please`?
@abenson, I'm happy for it to be named please here, which matches
upstream naming.
Thanks for reviewing the template so far, I believe I've made the other
corrections that you pointed out.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR REVIEW] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (6 preceding siblings ...)
2021-06-12 8:56 ` edneville
@ 2021-06-12 19:53 ` abenson
2021-06-12 19:53 ` abenson
` (6 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: abenson @ 2021-06-12 19:53 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 168 bytes --]
New review comment by abenson on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#discussion_r650430057
Comment:
This is redundant now
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR REVIEW] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (7 preceding siblings ...)
2021-06-12 19:53 ` [PR REVIEW] " abenson
@ 2021-06-12 19:53 ` abenson
2021-06-12 20:51 ` [PR PATCH] [Updated] " edneville
` (5 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: abenson @ 2021-06-12 19:53 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 190 bytes --]
New review comment by abenson on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#discussion_r650430080
Comment:
I meant the whole pre_build() could go away
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR PATCH] [Updated] New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (8 preceding siblings ...)
2021-06-12 19:53 ` abenson
@ 2021-06-12 20:51 ` edneville
2021-06-12 21:08 ` edneville
` (4 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: edneville @ 2021-06-12 20:51 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1696 bytes --]
There is an updated pull request by edneville against master on the void-packages repository
https://github.com/edneville/void-packages pleaser-0.4.1
https://github.com/void-linux/void-packages/pull/31430
New package: pleaser-0.4.1
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
-->
This was previously raised in #27037 but has since been reviewed by the SUSE security team.
A patch file from https://github.com/void-linux/void-packages/pull/31430.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-pleaser-0.4.1-31430.patch --]
[-- Type: text/x-diff, Size: 1694 bytes --]
From c562957f5e51f4a51c92c8bc04327f35643b84a3 Mon Sep 17 00:00:00 2001
From: ed neville <ed@s5h.net>
Date: Fri, 11 Jun 2021 20:33:09 +0000
Subject: [PATCH] New package: please-0.4.1
---
srcpkgs/please/files/please.pam | 4 ++++
srcpkgs/please/template | 22 ++++++++++++++++++++++
2 files changed, 26 insertions(+)
create mode 100644 srcpkgs/please/files/please.pam
create mode 100644 srcpkgs/please/template
diff --git a/srcpkgs/please/files/please.pam b/srcpkgs/please/files/please.pam
new file mode 100644
index 000000000000..10a4824b56e0
--- /dev/null
+++ b/srcpkgs/please/files/please.pam
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth include system-auth
+account include system-auth
+session include system-auth
diff --git a/srcpkgs/please/template b/srcpkgs/please/template
new file mode 100644
index 000000000000..30eddfcf7be6
--- /dev/null
+++ b/srcpkgs/please/template
@@ -0,0 +1,22 @@
+# Template file for 'please'
+pkgname=please
+version=0.4.1
+revision=1
+wrksrc="${pkgname}-v${version}"
+build_style=cargo
+makedepends="pam-devel"
+short_desc="Polite and easy to configure regex-first sudo alternative "
+maintainer="Ed Neville <ed@s5h.net>"
+license="GPL-3.0-or-later"
+homepage="https://www.usenix.org.uk/content/please.html"
+distfiles="https://gitlab.com/edneville/${pkgname}/-/archive/v${version}/${pkgname}-v${version}.tar.gz"
+checksum=0c81449d57a6bbbf1577d6474349f845e9a8c7a074b27fd1a4ef119ccd4f3c64
+
+post_install() {
+ vdoc README.md
+ vman man/please.ini.5
+ vman man/please.1
+ vinstall ${FILESDIR}/please.pam 644 etc/pam.d please
+ vinstall ${FILESDIR}/please.pam 644 etc/pam.d pleaseedit
+ chmod 4755 $DESTDIR/usr/bin/please $DESTDIR/usr/bin/pleaseedit
+}
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (9 preceding siblings ...)
2021-06-12 20:51 ` [PR PATCH] [Updated] " edneville
@ 2021-06-12 21:08 ` edneville
2021-06-29 21:06 ` edneville
` (3 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: edneville @ 2021-06-12 21:08 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 334 bytes --]
New comment by edneville on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#issuecomment-860108885
Comment:
> +_binary=please
> +pre_build() {
> + export CC_${RUST_BUILD//-/_}="${BUILD_CC}"
> +}
> +post_install() {
> + local manpage
@abenson, I've updated the template, thanks for looking again
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: New package: pleaser-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (10 preceding siblings ...)
2021-06-12 21:08 ` edneville
@ 2021-06-29 21:06 ` edneville
2021-07-21 20:37 ` New package: please-0.4.1 edneville
` (2 subsequent siblings)
14 siblings, 0 replies; 16+ messages in thread
From: edneville @ 2021-06-29 21:06 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 192 bytes --]
New comment by edneville on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#issuecomment-870917283
Comment:
Hello @abenson, are you happy to merge this now?
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: New package: please-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (11 preceding siblings ...)
2021-06-29 21:06 ` edneville
@ 2021-07-21 20:37 ` edneville
2021-07-22 1:25 ` [PR PATCH] [Closed]: " the-maldridge
2021-07-22 1:25 ` the-maldridge
14 siblings, 0 replies; 16+ messages in thread
From: edneville @ 2021-07-21 20:37 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 191 bytes --]
New comment by edneville on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#issuecomment-884483126
Comment:
Hello @abenson, are you happy to merge this now?
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PR PATCH] [Closed]: New package: please-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (12 preceding siblings ...)
2021-07-21 20:37 ` New package: please-0.4.1 edneville
@ 2021-07-22 1:25 ` the-maldridge
2021-07-22 1:25 ` the-maldridge
14 siblings, 0 replies; 16+ messages in thread
From: the-maldridge @ 2021-07-22 1:25 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1529 bytes --]
There's a closed pull request on the void-packages repository
New package: please-0.4.1
https://github.com/void-linux/void-packages/pull/31430
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [x] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [x] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [ ] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [x] I built this PR locally for my native architecture, (ARCH-LIBC)
- [x] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [x] aarch64-musl
- [x] armv7l
- [x] armv6l-musl
-->
This was previously raised in #27037 but has since been reviewed by the SUSE security team.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: New package: please-0.4.1
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
` (13 preceding siblings ...)
2021-07-22 1:25 ` [PR PATCH] [Closed]: " the-maldridge
@ 2021-07-22 1:25 ` the-maldridge
14 siblings, 0 replies; 16+ messages in thread
From: the-maldridge @ 2021-07-22 1:25 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 421 bytes --]
New comment by the-maldridge on void-packages repository
https://github.com/void-linux/void-packages/pull/31430#issuecomment-884599534
Comment:
Thank you for your interest in Void Linux. After significant internal discussion your request for this package has been rejected due to generally duplicated functionality already present in Void's repos, and concerns related to the security critical nature of the software.
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2021-07-22 1:25 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-11 21:14 [PR PATCH] New package: pleaser-0.4.1 edneville
2021-06-11 23:39 ` [PR REVIEW] " abenson
2021-06-11 23:39 ` abenson
2021-06-11 23:40 ` abenson
2021-06-11 23:43 ` abenson
2021-06-11 23:45 ` abenson
2021-06-12 8:33 ` [PR PATCH] [Updated] " edneville
2021-06-12 8:56 ` edneville
2021-06-12 19:53 ` [PR REVIEW] " abenson
2021-06-12 19:53 ` abenson
2021-06-12 20:51 ` [PR PATCH] [Updated] " edneville
2021-06-12 21:08 ` edneville
2021-06-29 21:06 ` edneville
2021-07-21 20:37 ` New package: please-0.4.1 edneville
2021-07-22 1:25 ` [PR PATCH] [Closed]: " the-maldridge
2021-07-22 1:25 ` the-maldridge
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).