* Re: [PR PATCH] [Updated] python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
@ 2021-10-21 4:19 ` vpzomtrrfrt
2021-10-22 20:54 ` paper42
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: vpzomtrrfrt @ 2021-10-21 4:19 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1617 bytes --]
There is an updated pull request by vpzomtrrfrt against master on the void-packages repository
https://github.com/vpzomtrrfrt/void-packages jellyfish-0.8.8
https://github.com/void-linux/void-packages/pull/33667
python3-jellyfish: Update to 0.8.8
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/33667.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-jellyfish-0.8.8-33667.patch --]
[-- Type: text/x-diff, Size: 1437 bytes --]
From 8fce32e008d13709452e45c517016d467bb0a840 Mon Sep 17 00:00:00 2001
From: Colin Reeder <colin@vpzom.click>
Date: Wed, 20 Oct 2021 21:57:17 -0600
Subject: [PATCH] python3-jellyfish: Update to 0.8.8
---
srcpkgs/python3-jellyfish/template | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/srcpkgs/python3-jellyfish/template b/srcpkgs/python3-jellyfish/template
index c1b55e36e8ef..7e66ca4e9478 100644
--- a/srcpkgs/python3-jellyfish/template
+++ b/srcpkgs/python3-jellyfish/template
@@ -1,19 +1,24 @@
# Template file for 'python3-jellyfish'
pkgname=python3-jellyfish
-version=0.7.2
-revision=4
+version=0.8.8
+revision=1
wrksrc="jellyfish-${version}"
build_style=python3-module
-pycompile_module="jellyfish"
hostmakedepends=" python3-setuptools"
makedepends="python3-devel"
+checkdepends="python3-pytest"
short_desc="Python3 library for approximate and phonetic matching of strings"
maintainer="Duncaen <duncaen@voidlinux.org>"
license="BSD-2-Clause"
homepage="https://github.com/sunlightlabs/jellyfish"
distfiles="${PYPI_SITE}/j/jellyfish/jellyfish-${version}.tar.gz"
-checksum=cb09c50d7e2bb7b926fc7654762bc81f9c629e0c92ae7137bf22b34f39515286
+checksum=0506089cacf9b5897442134417b04b3c6610c19f280ae535eace390dc6325a5c
post_install() {
vlicense LICENSE
}
+
+do_check() {
+ build_loc=$(compgen -G build/lib.linux-*)
+ PYTHONPATH="${build_loc}" pytest "${build_loc}/jellyfish/test.py"
+}
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
2021-10-21 4:19 ` [PR PATCH] [Updated] " vpzomtrrfrt
@ 2021-10-22 20:54 ` paper42
2021-10-22 21:08 ` [PR REVIEW] " paper42
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: paper42 @ 2021-10-22 20:54 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 183 bytes --]
New comment by paper42 on void-packages repository
https://github.com/void-linux/void-packages/pull/33667#issuecomment-949953693
Comment:
Did you test this update with beets 1.4.9?
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PR REVIEW] python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
2021-10-21 4:19 ` [PR PATCH] [Updated] " vpzomtrrfrt
2021-10-22 20:54 ` paper42
@ 2021-10-22 21:08 ` paper42
2021-10-22 21:12 ` vpzomtrrfrt
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: paper42 @ 2021-10-22 21:08 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 214 bytes --]
New review comment by paper42 on void-packages repository
https://github.com/void-linux/void-packages/pull/33667#discussion_r734844292
Comment:
```suggestion
make_check_target=build/lib.*/jellyfish/test.py
```
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
` (2 preceding siblings ...)
2021-10-22 21:08 ` [PR REVIEW] " paper42
@ 2021-10-22 21:12 ` vpzomtrrfrt
2021-10-22 21:16 ` [PR PATCH] [Updated] " vpzomtrrfrt
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: vpzomtrrfrt @ 2021-10-22 21:12 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 222 bytes --]
New comment by vpzomtrrfrt on void-packages repository
https://github.com/void-linux/void-packages/pull/33667#issuecomment-949962259
Comment:
> Did you test this update with beets 1.4.9?
I hadn't but it seems to work
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PR PATCH] [Updated] python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
` (3 preceding siblings ...)
2021-10-22 21:12 ` vpzomtrrfrt
@ 2021-10-22 21:16 ` vpzomtrrfrt
2021-10-22 21:17 ` vpzomtrrfrt
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: vpzomtrrfrt @ 2021-10-22 21:16 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1617 bytes --]
There is an updated pull request by vpzomtrrfrt against master on the void-packages repository
https://github.com/vpzomtrrfrt/void-packages jellyfish-0.8.8
https://github.com/void-linux/void-packages/pull/33667
python3-jellyfish: Update to 0.8.8
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/33667.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-jellyfish-0.8.8-33667.patch --]
[-- Type: text/x-diff, Size: 1347 bytes --]
From 670faf4faac9df07a889116b3f6876a5905493a7 Mon Sep 17 00:00:00 2001
From: Colin Reeder <colin@vpzom.click>
Date: Wed, 20 Oct 2021 21:57:17 -0600
Subject: [PATCH] python3-jellyfish: Update to 0.8.8
---
srcpkgs/python3-jellyfish/template | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/srcpkgs/python3-jellyfish/template b/srcpkgs/python3-jellyfish/template
index c1b55e36e8ef..7edad1557692 100644
--- a/srcpkgs/python3-jellyfish/template
+++ b/srcpkgs/python3-jellyfish/template
@@ -1,18 +1,19 @@
# Template file for 'python3-jellyfish'
pkgname=python3-jellyfish
-version=0.7.2
-revision=4
+version=0.8.8
+revision=1
wrksrc="jellyfish-${version}"
build_style=python3-module
-pycompile_module="jellyfish"
hostmakedepends=" python3-setuptools"
makedepends="python3-devel"
+checkdepends="python3-pytest"
short_desc="Python3 library for approximate and phonetic matching of strings"
maintainer="Duncaen <duncaen@voidlinux.org>"
license="BSD-2-Clause"
homepage="https://github.com/sunlightlabs/jellyfish"
distfiles="${PYPI_SITE}/j/jellyfish/jellyfish-${version}.tar.gz"
-checksum=cb09c50d7e2bb7b926fc7654762bc81f9c629e0c92ae7137bf22b34f39515286
+checksum=0506089cacf9b5897442134417b04b3c6610c19f280ae535eace390dc6325a5c
+make_check_target=build/lib.*/jellyfish/test.py
post_install() {
vlicense LICENSE
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PR PATCH] [Updated] python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
` (4 preceding siblings ...)
2021-10-22 21:16 ` [PR PATCH] [Updated] " vpzomtrrfrt
@ 2021-10-22 21:17 ` vpzomtrrfrt
2021-10-26 1:02 ` Goorzhel
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: vpzomtrrfrt @ 2021-10-22 21:17 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1617 bytes --]
There is an updated pull request by vpzomtrrfrt against master on the void-packages repository
https://github.com/vpzomtrrfrt/void-packages jellyfish-0.8.8
https://github.com/void-linux/void-packages/pull/33667
python3-jellyfish: Update to 0.8.8
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/33667.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-jellyfish-0.8.8-33667.patch --]
[-- Type: text/x-diff, Size: 1347 bytes --]
From 29c7e8244dcddbab1314ff4fc8da298057449992 Mon Sep 17 00:00:00 2001
From: Colin Reeder <colin@vpzom.click>
Date: Wed, 20 Oct 2021 21:57:17 -0600
Subject: [PATCH] python3-jellyfish: Update to 0.8.8
---
srcpkgs/python3-jellyfish/template | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/srcpkgs/python3-jellyfish/template b/srcpkgs/python3-jellyfish/template
index c1b55e36e8ef..61a15e15e861 100644
--- a/srcpkgs/python3-jellyfish/template
+++ b/srcpkgs/python3-jellyfish/template
@@ -1,18 +1,19 @@
# Template file for 'python3-jellyfish'
pkgname=python3-jellyfish
-version=0.7.2
-revision=4
+version=0.8.8
+revision=1
wrksrc="jellyfish-${version}"
build_style=python3-module
-pycompile_module="jellyfish"
+make_check_target=build/lib.*/jellyfish/test.py
hostmakedepends=" python3-setuptools"
makedepends="python3-devel"
+checkdepends="python3-pytest"
short_desc="Python3 library for approximate and phonetic matching of strings"
maintainer="Duncaen <duncaen@voidlinux.org>"
license="BSD-2-Clause"
homepage="https://github.com/sunlightlabs/jellyfish"
distfiles="${PYPI_SITE}/j/jellyfish/jellyfish-${version}.tar.gz"
-checksum=cb09c50d7e2bb7b926fc7654762bc81f9c629e0c92ae7137bf22b34f39515286
+checksum=0506089cacf9b5897442134417b04b3c6610c19f280ae535eace390dc6325a5c
post_install() {
vlicense LICENSE
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
` (5 preceding siblings ...)
2021-10-22 21:17 ` vpzomtrrfrt
@ 2021-10-26 1:02 ` Goorzhel
2021-10-26 1:02 ` Goorzhel
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Goorzhel @ 2021-10-26 1:02 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2956 bytes --]
New comment by Goorzhel on void-packages repository
https://github.com/void-linux/void-packages/pull/33667#issuecomment-951461611
Comment:
@vpzomtrrfrt , @paper42: I just did, and can confirm this fixes `beet`. Previously, it was throwing:
<details>
<summary>TypeError: str argument expected</summary>
```
$ beet im .
Traceback (most recent call last):
File "/usr/bin/beet", line 33, in <module>
sys.exit(load_entry_point('beets==1.4.9', 'console_scripts', 'beet')())
File "/usr/lib/python3.10/site-packages/beets/ui/__init__.py", line 1266, in main
_raw_main(args)
File "/usr/lib/python3.10/site-packages/beets/ui/__init__.py", line 1253, in _raw_main
subcommand.func(lib, suboptions, subargs)
File "/usr/lib/python3.10/site-packages/beets/ui/commands.py", line 955, in import_func
import_files(lib, paths, query)
File "/usr/lib/python3.10/site-packages/beets/ui/commands.py", line 925, in import_files
session.run()
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 329, in run
pl.run_parallel(QUEUE_SIZE)
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 445, in run_parallel
six.reraise(exc_info[0], exc_info[1], exc_info[2])
File "/usr/lib/python3.10/site-packages/six.py", line 719, in reraise
raise value
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 312, in run
out = self.coro.send(msg)
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 194, in coro
func(*(args + (task,)))
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 1351, in lookup_candidates
task.lookup_candidates()
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 641, in lookup_candidates
autotag.tag_album(self.items, search_ids=self.search_ids)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 461, in tag_album
_add_candidate(items, candidates, matched_candidate)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 374, in _add_candidate
mapping, extra_items, extra_tracks = assign_items(items, info.tracks)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 102, in assign_items
row.append(track_distance(item, track))
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 141, in track_distance
dist.add_string('track_title', item.title, track_info.title)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 533, in add_string
dist = string_dist(str1, str2)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 275, in string_dist
base_dist = _string_dist_basic(str1, str2)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 241, in _string_dist_basic
return levenshtein_distance(str1, str2) / float(max(len(str1), len(str2)))
TypeError: str argument expected
```
</details>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
` (6 preceding siblings ...)
2021-10-26 1:02 ` Goorzhel
@ 2021-10-26 1:02 ` Goorzhel
2021-10-26 1:03 ` Goorzhel
2021-10-28 22:28 ` [PR PATCH] [Merged]: " paper42
9 siblings, 0 replies; 11+ messages in thread
From: Goorzhel @ 2021-10-26 1:02 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2966 bytes --]
New comment by Goorzhel on void-packages repository
https://github.com/void-linux/void-packages/pull/33667#issuecomment-951461611
Comment:
@vpzomtrrfrt , @paper42: I just did, and can confirm this fixes `beet (at 1.4.9). Previously, it was throwing:
<details>
<summary>TypeError: str argument expected</summary>
```
$ beet im .
Traceback (most recent call last):
File "/usr/bin/beet", line 33, in <module>
sys.exit(load_entry_point('beets==1.4.9', 'console_scripts', 'beet')())
File "/usr/lib/python3.10/site-packages/beets/ui/__init__.py", line 1266, in main
_raw_main(args)
File "/usr/lib/python3.10/site-packages/beets/ui/__init__.py", line 1253, in _raw_main
subcommand.func(lib, suboptions, subargs)
File "/usr/lib/python3.10/site-packages/beets/ui/commands.py", line 955, in import_func
import_files(lib, paths, query)
File "/usr/lib/python3.10/site-packages/beets/ui/commands.py", line 925, in import_files
session.run()
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 329, in run
pl.run_parallel(QUEUE_SIZE)
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 445, in run_parallel
six.reraise(exc_info[0], exc_info[1], exc_info[2])
File "/usr/lib/python3.10/site-packages/six.py", line 719, in reraise
raise value
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 312, in run
out = self.coro.send(msg)
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 194, in coro
func(*(args + (task,)))
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 1351, in lookup_candidates
task.lookup_candidates()
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 641, in lookup_candidates
autotag.tag_album(self.items, search_ids=self.search_ids)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 461, in tag_album
_add_candidate(items, candidates, matched_candidate)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 374, in _add_candidate
mapping, extra_items, extra_tracks = assign_items(items, info.tracks)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 102, in assign_items
row.append(track_distance(item, track))
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 141, in track_distance
dist.add_string('track_title', item.title, track_info.title)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 533, in add_string
dist = string_dist(str1, str2)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 275, in string_dist
base_dist = _string_dist_basic(str1, str2)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 241, in _string_dist_basic
return levenshtein_distance(str1, str2) / float(max(len(str1), len(str2)))
TypeError: str argument expected
```
</details>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
` (7 preceding siblings ...)
2021-10-26 1:02 ` Goorzhel
@ 2021-10-26 1:03 ` Goorzhel
2021-10-28 22:28 ` [PR PATCH] [Merged]: " paper42
9 siblings, 0 replies; 11+ messages in thread
From: Goorzhel @ 2021-10-26 1:03 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2967 bytes --]
New comment by Goorzhel on void-packages repository
https://github.com/void-linux/void-packages/pull/33667#issuecomment-951461611
Comment:
@vpzomtrrfrt , @paper42: I just did, and can confirm this fixes `beet` (at 1.4.9). Previously, it was throwing:
<details>
<summary>TypeError: str argument expected</summary>
```
$ beet im .
Traceback (most recent call last):
File "/usr/bin/beet", line 33, in <module>
sys.exit(load_entry_point('beets==1.4.9', 'console_scripts', 'beet')())
File "/usr/lib/python3.10/site-packages/beets/ui/__init__.py", line 1266, in main
_raw_main(args)
File "/usr/lib/python3.10/site-packages/beets/ui/__init__.py", line 1253, in _raw_main
subcommand.func(lib, suboptions, subargs)
File "/usr/lib/python3.10/site-packages/beets/ui/commands.py", line 955, in import_func
import_files(lib, paths, query)
File "/usr/lib/python3.10/site-packages/beets/ui/commands.py", line 925, in import_files
session.run()
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 329, in run
pl.run_parallel(QUEUE_SIZE)
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 445, in run_parallel
six.reraise(exc_info[0], exc_info[1], exc_info[2])
File "/usr/lib/python3.10/site-packages/six.py", line 719, in reraise
raise value
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 312, in run
out = self.coro.send(msg)
File "/usr/lib/python3.10/site-packages/beets/util/pipeline.py", line 194, in coro
func(*(args + (task,)))
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 1351, in lookup_candidates
task.lookup_candidates()
File "/usr/lib/python3.10/site-packages/beets/importer.py", line 641, in lookup_candidates
autotag.tag_album(self.items, search_ids=self.search_ids)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 461, in tag_album
_add_candidate(items, candidates, matched_candidate)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 374, in _add_candidate
mapping, extra_items, extra_tracks = assign_items(items, info.tracks)
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 102, in assign_items
row.append(track_distance(item, track))
File "/usr/lib/python3.10/site-packages/beets/autotag/match.py", line 141, in track_distance
dist.add_string('track_title', item.title, track_info.title)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 533, in add_string
dist = string_dist(str1, str2)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 275, in string_dist
base_dist = _string_dist_basic(str1, str2)
File "/usr/lib/python3.10/site-packages/beets/autotag/hooks.py", line 241, in _string_dist_basic
return levenshtein_distance(str1, str2) / float(max(len(str1), len(str2)))
TypeError: str argument expected
```
</details>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PR PATCH] [Merged]: python3-jellyfish: Update to 0.8.8
2021-10-21 3:59 [PR PATCH] python3-jellyfish: Update to 0.8.8 vpzomtrrfrt
` (8 preceding siblings ...)
2021-10-26 1:03 ` Goorzhel
@ 2021-10-28 22:28 ` paper42
9 siblings, 0 replies; 11+ messages in thread
From: paper42 @ 2021-10-28 22:28 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1445 bytes --]
There's a merged pull request on the void-packages repository
python3-jellyfish: Update to 0.8.8
https://github.com/void-linux/void-packages/pull/33667
Description:
<!-- Mark items with [x] where applicable -->
#### General
- [ ] This is a new package and it conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements)
#### Have the results of the proposed changes been tested?
- [ ] I use the packages affected by the proposed changes on a regular basis and confirm this PR works for me
- [x] I generally don't use the affected packages but briefly tested this PR
<!--
If GitHub CI cannot be used to validate the build result (for example, if the
build is likely to take several hours), make sure to
[skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration).
When skipping CI, uncomment and fill out the following section.
Note: for builds that are likely to complete in less than 2 hours, it is not
acceptable to skip CI.
-->
<!--
#### Does it build and run successfully?
(Please choose at least one native build and, if supported, at least one cross build. More are better.)
- [ ] I built this PR locally for my native architecture, (ARCH-LIBC)
- [ ] I built this PR locally for these architectures (if supported. mark crossbuilds):
- [ ] aarch64-musl
- [ ] armv7l
- [ ] armv6l-musl
-->
^ permalink raw reply [flat|nested] 11+ messages in thread