* [PR PATCH] PrusaSlicer: update to 2.4.0.
@ 2022-01-18 10:22 Gigahawk
2022-01-19 8:04 ` [PR PATCH] [Updated] " Gigahawk
` (6 more replies)
0 siblings, 7 replies; 9+ messages in thread
From: Gigahawk @ 2022-01-18 10:22 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2172 bytes --]
There is a new pull request by Gigahawk against master on the void-packages repository
https://github.com/Gigahawk/void-packages prusaslicer_update
https://github.com/void-linux/void-packages/pull/35105
PrusaSlicer: update to 2.4.0.
<!-- Uncomment relevant sections and delete options which are not applicable -->
#### Testing the changes
- I tested the changes in this PR: **NO**
Having trouble getting this to build
```
=> PrusaSlicer-2.4.0_1: removing autodeps, please wait...
=> ERROR: PrusaSlicer-2.4.0_1: failed to install target dependencies! (error 8)
enchant2-2.2.15_4: broken, unresolvable shlib `libicudata.so.69'
libxml2-2.9.10_5: broken, unresolvable shlib `libicudata.so.69'
libxml2-2.9.10_5: broken, unresolvable shlib `libicui18n.so.69'
webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicui18n.so.69'
enchant2-2.2.15_4: broken, unresolvable shlib `libicuuc.so.69'
libharfbuzz-2.9.1_2: broken, unresolvable shlib `libicuuc.so.69'
libnuspell-5.0.1_1: broken, unresolvable shlib `libicuuc.so.69'
libpsl-0.21.1_2: broken, unresolvable shlib `libicuuc.so.69'
libxml2-2.9.10_5: broken, unresolvable shlib `libicuuc.so.69'
webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicuuc.so.69'
Transaction aborted due to unresolved shlibs.
=> ERROR: Please see above for the real error, exiting...
```
<!--
#### New package
- This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration)
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
<!--
#### Local build testing
- I built this PR locally for my native architecture, (ARCH-LIBC)
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/35105.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-prusaslicer_update-35105.patch --]
[-- Type: text/x-diff, Size: 1158 bytes --]
From 808a435bb72ab1bcb0a6e02439b96f5e862b5745 Mon Sep 17 00:00:00 2001
From: Jasper Chan <jasperchan515@gmail.com>
Date: Tue, 18 Jan 2022 02:19:51 -0800
Subject: [PATCH] PrusaSlicer: update to 2.4.0.
---
srcpkgs/PrusaSlicer/template | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/srcpkgs/PrusaSlicer/template b/srcpkgs/PrusaSlicer/template
index dd0e76cb8017..e5a13d2a8edc 100644
--- a/srcpkgs/PrusaSlicer/template
+++ b/srcpkgs/PrusaSlicer/template
@@ -1,6 +1,6 @@
# Template file for 'PrusaSlicer'
pkgname=PrusaSlicer
-version=2.3.0
+version=2.4.0
revision=1
wrksrc="PrusaSlicer-version_${version}"
build_style=cmake
@@ -16,7 +16,7 @@ maintainer="Jasper Chan <jasperchan515@gmail.com>"
license="GPL-3.0-or-later"
homepage="https://www.prusa3d.com/prusaslicer/"
distfiles="https://github.com/prusa3d/Prusaslicer/archive/version_${version}.tar.gz"
-checksum=cd3bac5e29b5441fc4690f28cd7b1064e97dc00207bbdc88f7bd7832308d6ca5
+checksum=906d0acf0d0e064ae3cbaa16ba1a2e24dd9c32ceb2121464cb4d5951c09e66c2
nocross="https://build.voidlinux.org/builders/armv7l_builder/builds/25230/steps/shell_3/logs/stdio"
Slic3rPE_package() {
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PR PATCH] [Updated] PrusaSlicer: update to 2.4.0.
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
@ 2022-01-19 8:04 ` Gigahawk
2022-01-19 8:06 ` Gigahawk
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Gigahawk @ 2022-01-19 8:04 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2372 bytes --]
There is an updated pull request by Gigahawk against master on the void-packages repository
https://github.com/Gigahawk/void-packages prusaslicer_update
https://github.com/void-linux/void-packages/pull/35105
PrusaSlicer: update to 2.4.0.
<!-- Uncomment relevant sections and delete options which are not applicable -->
#### Testing the changes
- I tested the changes in this PR: **NO**
Having trouble getting this to build
```
=> PrusaSlicer-2.4.0_1: removing autodeps, please wait...
=> ERROR: PrusaSlicer-2.4.0_1: failed to install target dependencies! (error 8)
enchant2-2.2.15_4: broken, unresolvable shlib `libicudata.so.69'
libxml2-2.9.10_5: broken, unresolvable shlib `libicudata.so.69'
libxml2-2.9.10_5: broken, unresolvable shlib `libicui18n.so.69'
webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicui18n.so.69'
enchant2-2.2.15_4: broken, unresolvable shlib `libicuuc.so.69'
libharfbuzz-2.9.1_2: broken, unresolvable shlib `libicuuc.so.69'
libnuspell-5.0.1_1: broken, unresolvable shlib `libicuuc.so.69'
libpsl-0.21.1_2: broken, unresolvable shlib `libicuuc.so.69'
libxml2-2.9.10_5: broken, unresolvable shlib `libicuuc.so.69'
webkit2gtk-2.34.2_1: broken, unresolvable shlib `libicuuc.so.69'
Transaction aborted due to unresolved shlibs.
=> ERROR: Please see above for the real error, exiting...
```
EDIT: Been a long time since I had to do a version bump, forgot about this whole unresolvable shlib thing.
Perhaps it would be good to mention this under CONTRIBUTING.md or Manual.md?
- #35107
<!--
#### New package
- This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration)
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
<!--
#### Local build testing
- I built this PR locally for my native architecture, (ARCH-LIBC)
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/35105.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-prusaslicer_update-35105.patch --]
[-- Type: text/x-diff, Size: 3102 bytes --]
From db79b254755b12d6df7d75183c2fe4c0f8e90cc2 Mon Sep 17 00:00:00 2001
From: Jasper Chan <jasperchan515@gmail.com>
Date: Tue, 18 Jan 2022 02:19:51 -0800
Subject: [PATCH] PrusaSlicer: update to 2.4.0.
---
srcpkgs/GanttProject/template | 15 +++++++++++++++
srcpkgs/PrusaSlicer/patches/cross.patch | 11 -----------
srcpkgs/PrusaSlicer/template | 4 ++--
3 files changed, 17 insertions(+), 13 deletions(-)
create mode 100644 srcpkgs/GanttProject/template
delete mode 100644 srcpkgs/PrusaSlicer/patches/cross.patch
diff --git a/srcpkgs/GanttProject/template b/srcpkgs/GanttProject/template
new file mode 100644
index 000000000000..7718fb6b133d
--- /dev/null
+++ b/srcpkgs/GanttProject/template
@@ -0,0 +1,15 @@
+# Template file for 'GanttProject'
+pkgname=GanttProject
+version=2.8.10
+revision=1
+srcdir="bardsoftware-ganttproject-b6f4359"
+build_style=gnu-configure
+hostmakedepends=""
+makedepends=""
+depends=""
+short_desc="free project scheduling and management app"
+maintainer="Jasper Chan <jasperchan515@gmail.com>"
+license="GPL-3.0-or-later"
+homepage="https://www.ganttproject.biz/"
+distfiles="${SOURCEFORGE_SITE}/ganttproject/ganttproject-${version}/GanttProject%20${version}.tar.gz>GanttProject-${version}.tar.gz"
+checksum=f46ac4649ba1c6a9741aa9518c83b84db5b06a2700285a9a74ce707aff877c45
diff --git a/srcpkgs/PrusaSlicer/patches/cross.patch b/srcpkgs/PrusaSlicer/patches/cross.patch
deleted file mode 100644
index d64a450d9e9f..000000000000
--- a/srcpkgs/PrusaSlicer/patches/cross.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/src/avrdude/CMakeLists.txt 2020-06-04 09:19:26.017251215 +0200
-+++ b/src/avrdude/CMakeLists.txt 2020-06-04 09:19:36.468250771 +0200
-@@ -83,7 +83,7 @@ add_executable(avrdude-conf-gen conf-gen
- add_custom_command(
- DEPENDS avrdude-conf-gen ${CMAKE_CURRENT_SOURCE_DIR}/avrdude-slic3r.conf
- OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
-- COMMAND $<TARGET_FILE:avrdude-conf-gen> avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
-+ COMMAND avrdude-conf-gen avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- )
-
diff --git a/srcpkgs/PrusaSlicer/template b/srcpkgs/PrusaSlicer/template
index dd0e76cb8017..e5a13d2a8edc 100644
--- a/srcpkgs/PrusaSlicer/template
+++ b/srcpkgs/PrusaSlicer/template
@@ -1,6 +1,6 @@
# Template file for 'PrusaSlicer'
pkgname=PrusaSlicer
-version=2.3.0
+version=2.4.0
revision=1
wrksrc="PrusaSlicer-version_${version}"
build_style=cmake
@@ -16,7 +16,7 @@ maintainer="Jasper Chan <jasperchan515@gmail.com>"
license="GPL-3.0-or-later"
homepage="https://www.prusa3d.com/prusaslicer/"
distfiles="https://github.com/prusa3d/Prusaslicer/archive/version_${version}.tar.gz"
-checksum=cd3bac5e29b5441fc4690f28cd7b1064e97dc00207bbdc88f7bd7832308d6ca5
+checksum=906d0acf0d0e064ae3cbaa16ba1a2e24dd9c32ceb2121464cb4d5951c09e66c2
nocross="https://build.voidlinux.org/builders/armv7l_builder/builds/25230/steps/shell_3/logs/stdio"
Slic3rPE_package() {
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PR PATCH] [Updated] PrusaSlicer: update to 2.4.0.
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
2022-01-19 8:04 ` [PR PATCH] [Updated] " Gigahawk
@ 2022-01-19 8:06 ` Gigahawk
2022-01-19 8:09 ` [PR REVIEW] " Gigahawk
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Gigahawk @ 2022-01-19 8:06 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1282 bytes --]
There is an updated pull request by Gigahawk against master on the void-packages repository
https://github.com/Gigahawk/void-packages prusaslicer_update
https://github.com/void-linux/void-packages/pull/35105
PrusaSlicer: update to 2.4.0.
<!-- Uncomment relevant sections and delete options which are not applicable -->
#### Testing the changes
- I tested the changes in this PR: **YES**
Sliced and exported a part, seems to work fine.
<!--
#### New package
- This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration)
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
#### Local build testing
- I built this PR locally for my native architecture, (x86_64)
<!--
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
A patch file from https://github.com/void-linux/void-packages/pull/35105.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-prusaslicer_update-35105.patch --]
[-- Type: text/x-diff, Size: 2200 bytes --]
From cc077b58d646b6ccd00fc0855a233716b4310b6e Mon Sep 17 00:00:00 2001
From: Jasper Chan <jasperchan515@gmail.com>
Date: Wed, 19 Jan 2022 00:06:29 -0800
Subject: [PATCH] PrusaSlicer: update to 2.4.0.
---
srcpkgs/PrusaSlicer/patches/cross.patch | 11 -----------
srcpkgs/PrusaSlicer/template | 4 ++--
2 files changed, 2 insertions(+), 13 deletions(-)
delete mode 100644 srcpkgs/PrusaSlicer/patches/cross.patch
diff --git a/srcpkgs/PrusaSlicer/patches/cross.patch b/srcpkgs/PrusaSlicer/patches/cross.patch
deleted file mode 100644
index d64a450d9e9f..000000000000
--- a/srcpkgs/PrusaSlicer/patches/cross.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/src/avrdude/CMakeLists.txt 2020-06-04 09:19:26.017251215 +0200
-+++ b/src/avrdude/CMakeLists.txt 2020-06-04 09:19:36.468250771 +0200
-@@ -83,7 +83,7 @@ add_executable(avrdude-conf-gen conf-gen
- add_custom_command(
- DEPENDS avrdude-conf-gen ${CMAKE_CURRENT_SOURCE_DIR}/avrdude-slic3r.conf
- OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
-- COMMAND $<TARGET_FILE:avrdude-conf-gen> avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
-+ COMMAND avrdude-conf-gen avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- )
-
diff --git a/srcpkgs/PrusaSlicer/template b/srcpkgs/PrusaSlicer/template
index dd0e76cb8017..e5a13d2a8edc 100644
--- a/srcpkgs/PrusaSlicer/template
+++ b/srcpkgs/PrusaSlicer/template
@@ -1,6 +1,6 @@
# Template file for 'PrusaSlicer'
pkgname=PrusaSlicer
-version=2.3.0
+version=2.4.0
revision=1
wrksrc="PrusaSlicer-version_${version}"
build_style=cmake
@@ -16,7 +16,7 @@ maintainer="Jasper Chan <jasperchan515@gmail.com>"
license="GPL-3.0-or-later"
homepage="https://www.prusa3d.com/prusaslicer/"
distfiles="https://github.com/prusa3d/Prusaslicer/archive/version_${version}.tar.gz"
-checksum=cd3bac5e29b5441fc4690f28cd7b1064e97dc00207bbdc88f7bd7832308d6ca5
+checksum=906d0acf0d0e064ae3cbaa16ba1a2e24dd9c32ceb2121464cb4d5951c09e66c2
nocross="https://build.voidlinux.org/builders/armv7l_builder/builds/25230/steps/shell_3/logs/stdio"
Slic3rPE_package() {
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PR REVIEW] PrusaSlicer: update to 2.4.0.
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
2022-01-19 8:04 ` [PR PATCH] [Updated] " Gigahawk
2022-01-19 8:06 ` Gigahawk
@ 2022-01-19 8:09 ` Gigahawk
2022-01-19 9:43 ` Gigahawk
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Gigahawk @ 2022-01-19 8:09 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 268 bytes --]
New review comment by Gigahawk on void-packages repository
https://github.com/void-linux/void-packages/pull/35105#discussion_r787443997
Comment:
The code this file is patching no longer seems to exist.
I assume removing this is OK since `nocross` is set anyways.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: PrusaSlicer: update to 2.4.0.
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
` (2 preceding siblings ...)
2022-01-19 8:09 ` [PR REVIEW] " Gigahawk
@ 2022-01-19 9:43 ` Gigahawk
2022-01-19 10:47 ` Gigahawk
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Gigahawk @ 2022-01-19 9:43 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2477 bytes --]
New comment by Gigahawk on void-packages repository
https://github.com/void-linux/void-packages/pull/35105#issuecomment-1016257406
Comment:
The build errors for i686 I assume have to do with the `icu` stuff still being in the backlog:
```
[/tsutil/creststn/TestBinaryCollationData]
*Note* some errors are data-loading related. If the data used is not the
stock ICU data (i.e some have been added or removed), consider using
the '-w' option to turn these errors into warnings.
Elapsed Time: 00:00:16.417
make[2]: *** [Makefile:98: check-local] Error 1
make[2]: Leaving directory '/builddir/icu/source/test/cintltst'
-------------
| *** FAILING TEST SUMMARY FOR: intltest
TestGetSize
ResourceBundleTest
utility
| *** END FAILING TEST SUMMARY FOR: intltest
-------------
| *** FAILING TEST SUMMARY FOR: cintltst
/tsutil/crestst/TestGetSize
/tsutil/creststn/TestNewTypes
/tsutil/creststn/TestBinaryCollationData
| *** END FAILING TEST SUMMARY FOR: cintltst
---------------
ALL TESTS SUMMARY:
ok: testdata iotest
===== ERRS: intltest cintltst
make[1]: *** [Makefile:91: check-recursive] Error 1
make[1]: Leaving directory '/builddir/icu/source/test'
make: *** [Makefile:153: check-recursive] Error 2
=> ERROR: icu-70.1_1: do_check: '${make_cmd} ${make_check_args} ${make_check_target}' exited with 2
=> ERROR: in do_check() at common/build-style/gnu-configure.sh:33
Error: Process completed with exit code 1.
```
I'm not sure what to make of the x86_64-musl errors, it looks like a test is failing (presumably due to differences between musl and glibc)
```
Testing Mutable priority queue - first pop
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libslic3r_tests is a Catch v2.13.6 host application.
Run with -? for options
-------------------------------------------------------------------------------
Mutable priority queue - first pop
-------------------------------------------------------------------------------
/builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:343
...............................................................................
/builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:367: FAILED:
CHECK( valid )
with expansion:
false
Testing Mutable priority queue complex
Passed in 0.005678 [seconds]
```
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: PrusaSlicer: update to 2.4.0.
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
` (3 preceding siblings ...)
2022-01-19 9:43 ` Gigahawk
@ 2022-01-19 10:47 ` Gigahawk
2022-01-28 7:53 ` ericonr
2022-01-28 7:53 ` [PR PATCH] [Closed]: " ericonr
6 siblings, 0 replies; 9+ messages in thread
From: Gigahawk @ 2022-01-19 10:47 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 2687 bytes --]
New comment by Gigahawk on void-packages repository
https://github.com/void-linux/void-packages/pull/35105#issuecomment-1016257406
Comment:
The build errors for i686 I assume have to do with the `icu` stuff still being in the backlog:
```
[/tsutil/creststn/TestBinaryCollationData]
*Note* some errors are data-loading related. If the data used is not the
stock ICU data (i.e some have been added or removed), consider using
the '-w' option to turn these errors into warnings.
Elapsed Time: 00:00:16.417
make[2]: *** [Makefile:98: check-local] Error 1
make[2]: Leaving directory '/builddir/icu/source/test/cintltst'
-------------
| *** FAILING TEST SUMMARY FOR: intltest
TestGetSize
ResourceBundleTest
utility
| *** END FAILING TEST SUMMARY FOR: intltest
-------------
| *** FAILING TEST SUMMARY FOR: cintltst
/tsutil/crestst/TestGetSize
/tsutil/creststn/TestNewTypes
/tsutil/creststn/TestBinaryCollationData
| *** END FAILING TEST SUMMARY FOR: cintltst
---------------
ALL TESTS SUMMARY:
ok: testdata iotest
===== ERRS: intltest cintltst
make[1]: *** [Makefile:91: check-recursive] Error 1
make[1]: Leaving directory '/builddir/icu/source/test'
make: *** [Makefile:153: check-recursive] Error 2
=> ERROR: icu-70.1_1: do_check: '${make_cmd} ${make_check_args} ${make_check_target}' exited with 2
=> ERROR: in do_check() at common/build-style/gnu-configure.sh:33
Error: Process completed with exit code 1.
```
I'm not sure what to make of the x86_64-musl errors, it looks like a test is failing (presumably due to differences between musl and glibc)
```
Testing Mutable priority queue - first pop
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libslic3r_tests is a Catch v2.13.6 host application.
Run with -? for options
-------------------------------------------------------------------------------
Mutable priority queue - first pop
-------------------------------------------------------------------------------
/builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:343
...............................................................................
/builddir/PrusaSlicer-version_2.4.0/tests/libslic3r/test_mutable_priority_queue.cpp:367: FAILED:
CHECK( valid )
with expansion:
false
Testing Mutable priority queue complex
Passed in 0.005678 [seconds]
```
It looks like this test is either new or failing as of this new version, running CI against 2.3.0 doesn't produce any problems
https://github.com/Gigahawk/void-packages/runs/4865799953?check_suite_focus=true
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: PrusaSlicer: update to 2.4.0.
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
` (4 preceding siblings ...)
2022-01-19 10:47 ` Gigahawk
@ 2022-01-28 7:53 ` ericonr
2022-01-28 7:53 ` [PR PATCH] [Closed]: " ericonr
6 siblings, 0 replies; 9+ messages in thread
From: ericonr @ 2022-01-28 7:53 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 207 bytes --]
New comment by ericonr on void-packages repository
https://github.com/void-linux/void-packages/pull/35105#issuecomment-1023968428
Comment:
d5123dd31980758c2a5700d480555e35798edfcd
Thank you for the PR!
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PR PATCH] [Closed]: PrusaSlicer: update to 2.4.0.
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
` (5 preceding siblings ...)
2022-01-28 7:53 ` ericonr
@ 2022-01-28 7:53 ` ericonr
6 siblings, 0 replies; 9+ messages in thread
From: ericonr @ 2022-01-28 7:53 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 1113 bytes --]
There's a closed pull request on the void-packages repository
PrusaSlicer: update to 2.4.0.
https://github.com/void-linux/void-packages/pull/35105
Description:
<!-- Uncomment relevant sections and delete options which are not applicable -->
#### Testing the changes
- I tested the changes in this PR: **YES**
Sliced and exported a part, seems to work fine.
<!--
#### New package
- This new package conforms to the [quality requirements](https://github.com/void-linux/void-packages/blob/master/Manual.md#quality-requirements): **YES**|**NO**
-->
<!-- Note: If the build is likely to take more than 2 hours, please [skip CI](https://github.com/void-linux/void-packages/blob/master/CONTRIBUTING.md#continuous-integration)
and test at least one native build and, if supported, at least one cross build.
Ignore this section if this PR is not skipping CI.
-->
#### Local build testing
- I built this PR locally for my native architecture, (x86_64)
<!--
- I built this PR locally for these architectures (if supported. mark crossbuilds):
- aarch64-musl
- armv7l
- armv6l-musl
-->
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PR PATCH] PrusaSlicer: update to 2.4.0.
@ 2022-01-07 17:06 Gottox
0 siblings, 0 replies; 9+ messages in thread
From: Gottox @ 2022-01-07 17:06 UTC (permalink / raw)
To: ml
[-- Attachment #1: Type: text/plain, Size: 326 bytes --]
There is a new pull request by Gottox against master on the void-packages repository
https://github.com/Gottox/void-packages PrusaSlicer-2.4.0
https://github.com/void-linux/void-packages/pull/34924
PrusaSlicer: update to 2.4.0.
None
A patch file from https://github.com/void-linux/void-packages/pull/34924.patch is attached
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: github-pr-PrusaSlicer-2.4.0-34924.patch --]
[-- Type: text/x-diff, Size: 2196 bytes --]
From 31028dc6981f62386bd316b854273bb42d06a7fd Mon Sep 17 00:00:00 2001
From: Enno Boland <gottox@voidlinux.org>
Date: Fri, 7 Jan 2022 18:06:47 +0100
Subject: [PATCH] PrusaSlicer: update to 2.4.0.
---
srcpkgs/PrusaSlicer/patches/cross.patch | 11 -----------
srcpkgs/PrusaSlicer/template | 4 ++--
2 files changed, 2 insertions(+), 13 deletions(-)
delete mode 100644 srcpkgs/PrusaSlicer/patches/cross.patch
diff --git a/srcpkgs/PrusaSlicer/patches/cross.patch b/srcpkgs/PrusaSlicer/patches/cross.patch
deleted file mode 100644
index d64a450d9e9f..000000000000
--- a/srcpkgs/PrusaSlicer/patches/cross.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/src/avrdude/CMakeLists.txt 2020-06-04 09:19:26.017251215 +0200
-+++ b/src/avrdude/CMakeLists.txt 2020-06-04 09:19:36.468250771 +0200
-@@ -83,7 +83,7 @@ add_executable(avrdude-conf-gen conf-gen
- add_custom_command(
- DEPENDS avrdude-conf-gen ${CMAKE_CURRENT_SOURCE_DIR}/avrdude-slic3r.conf
- OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
-- COMMAND $<TARGET_FILE:avrdude-conf-gen> avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
-+ COMMAND avrdude-conf-gen avrdude-slic3r.conf avrdude_slic3r_conf ${CMAKE_CURRENT_BINARY_DIR}/avrdude-slic3r.conf.h
- WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
- )
-
diff --git a/srcpkgs/PrusaSlicer/template b/srcpkgs/PrusaSlicer/template
index dd0e76cb8017..e5a13d2a8edc 100644
--- a/srcpkgs/PrusaSlicer/template
+++ b/srcpkgs/PrusaSlicer/template
@@ -1,6 +1,6 @@
# Template file for 'PrusaSlicer'
pkgname=PrusaSlicer
-version=2.3.0
+version=2.4.0
revision=1
wrksrc="PrusaSlicer-version_${version}"
build_style=cmake
@@ -16,7 +16,7 @@ maintainer="Jasper Chan <jasperchan515@gmail.com>"
license="GPL-3.0-or-later"
homepage="https://www.prusa3d.com/prusaslicer/"
distfiles="https://github.com/prusa3d/Prusaslicer/archive/version_${version}.tar.gz"
-checksum=cd3bac5e29b5441fc4690f28cd7b1064e97dc00207bbdc88f7bd7832308d6ca5
+checksum=906d0acf0d0e064ae3cbaa16ba1a2e24dd9c32ceb2121464cb4d5951c09e66c2
nocross="https://build.voidlinux.org/builders/armv7l_builder/builds/25230/steps/shell_3/logs/stdio"
Slic3rPE_package() {
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-01-28 7:53 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-18 10:22 [PR PATCH] PrusaSlicer: update to 2.4.0 Gigahawk
2022-01-19 8:04 ` [PR PATCH] [Updated] " Gigahawk
2022-01-19 8:06 ` Gigahawk
2022-01-19 8:09 ` [PR REVIEW] " Gigahawk
2022-01-19 9:43 ` Gigahawk
2022-01-19 10:47 ` Gigahawk
2022-01-28 7:53 ` ericonr
2022-01-28 7:53 ` [PR PATCH] [Closed]: " ericonr
-- strict thread matches above, loose matches on Subject: below --
2022-01-07 17:06 [PR PATCH] " Gottox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).