* [9fans] Network problems
@ 2002-09-30 22:58 John E. Barham
0 siblings, 0 replies; 6+ messages in thread
From: John E. Barham @ 2002-09-30 22:58 UTC (permalink / raw)
To: 9fans
I've successfully installed P9 from the latest ISO, but have not been able
to get it to use my network card, a Linksys Etherfast 10/100 PCI card.
I added the line:
ether0=type=ec2t
to plan9.ini and uncommented the DHCP config lines in /rc/bin/termrc.
I also tried setting the ether type to 2114x as suggested in earlier posts,
but w/out success: ip/ipconfig complains on boot that /net/ether0 doesn't
exist.
Ideas? Or, assuming this card is unsupported, recommendations for
inexpensive Ethernet cards known to work?
Thanks,
John
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [9fans] Network problems
@ 2002-09-30 23:34 Russ Cox
2002-10-01 0:07 ` John E. Barham
0 siblings, 1 reply; 6+ messages in thread
From: Russ Cox @ 2002-09-30 23:34 UTC (permalink / raw)
To: 9fans
What does the "pci" command print?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Network problems
@ 2002-10-01 0:48 jmk
2002-10-01 1:20 ` John E. Barham
0 siblings, 1 reply; 6+ messages in thread
From: jmk @ 2002-10-01 0:48 UTC (permalink / raw)
To: 9fans
>1.10.0: 02.00.00 1317/0985 3 0:0000d801 256 1:fc9ffc00 1024
This is your ethenet controller. It has vendor (0x1317)
and device (0985) IDs which we don't recognise. Do you know
who the chip manufacturer is?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Network problems
2002-10-01 0:48 jmk
@ 2002-10-01 1:20 ` John E. Barham
0 siblings, 0 replies; 6+ messages in thread
From: John E. Barham @ 2002-10-01 1:20 UTC (permalink / raw)
To: 9fans
> >1.10.0: 02.00.00 1317/0985 3 0:0000d801 256 1:fc9ffc00 1024
>
> This is your ethenet controller. It has vendor (0x1317)
> and device (0985) IDs which we don't recognise. Do you know
> who the chip manufacturer is?
The chip on the board says:
Linksys
LNE100TX Version 4.1
LNE110TX Version 4.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [9fans] Network problems
@ 2002-10-07 20:22 jmk
0 siblings, 0 replies; 6+ messages in thread
From: jmk @ 2002-10-07 20:22 UTC (permalink / raw)
To: 9fans
I have made an attempt to handle the AMDtek chip found in the
Linksys LNE100TX Etherfast 10/100 series of LAN Cards. I have a ver 5.1
card (newly purchased from CompUSA), I'd be interested to know if older
versions work.
The driver is available on sources.
--jim
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-10-07 20:22 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-09-30 22:58 [9fans] Network problems John E. Barham
2002-09-30 23:34 Russ Cox
2002-10-01 0:07 ` John E. Barham
2002-10-01 0:48 jmk
2002-10-01 1:20 ` John E. Barham
2002-10-07 20:22 jmk
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).