9fans - fans of the OS Plan 9 from Bell Labs
 help / color / mirror / Atom feed
* [9fans] A strange S3 Vision 968 card
@ 1999-05-05 13:18 jmk
  0 siblings, 0 replies; 6+ messages in thread
From: jmk @ 1999-05-05 13:18 UTC (permalink / raw)


For a very long time, every card Diamond made was a 'Stealth something-or-other'
and it was very confusing. Here's the entry I have for the Stealth 64 Video VRAM:

ctlr
	0xC0045="Stealth 64 Video VRAM Vers. 1.01"
	0xC0045="Stealth 64 Video VRAM Vers. 1.06"
	0xC0045="Stealth 64 Video VRAM Vers. 2.02"
	link=vga
	ramdac=tvp3026-175
	ctlr=vision968 link=ibm8514 linear=1 vclkphs=1
	link=s3clock clock=tvp3026clock
	hwgc=tvp3026hwgc

Note I've only ever seen a card with a DAC rated up to 175MHz. With 200MHz
you should be able to get 1600x1200 and even 1800x1350 if the monitor allows.

--jim




^ permalink raw reply	[flat|nested] 6+ messages in thread

* [9fans] A strange S3 Vision 968 card
@ 1999-05-06  3:39 okamoto
  0 siblings, 0 replies; 6+ messages in thread
From: okamoto @ 1999-05-06  3:39 UTC (permalink / raw)


>If the cursor hangs reliably with the new database entry even after
>a clean reboot, I'd just go back to the one that works.

This time, I turned off the PC, and wait 10 secs, then, rebooted.
No problems found!

sorry, your new database works fine also to -220 version.

Kenji




^ permalink raw reply	[flat|nested] 6+ messages in thread

* [9fans] A strange S3 Vision 968 card
@ 1999-05-06  3:13 jmk
  0 siblings, 0 replies; 6+ messages in thread
From: jmk @ 1999-05-06  3:13 UTC (permalink / raw)


	>When I changed the line
	>ramdac=tvp3026-175
	>to
	>ramdac=tvp3026-220,
	>the cursor freesed.  
	>Is this the difference between vclkphs=1 or not?

That change in itself should do nothing, it only sets an upper limit
on the clock you are allowed to use in a monitor entry; if the monitor
entry says 'clock=135' it shouldn't make any difference.

The ways in which the S3 968 and TVP3026 can be configured together
vary between boards and there are some tweaks available if you look in
/sys/src/cmd/aux/vga/vision968.c ('disa1sc=1' is one of the tweaks).
If the cursor hangs reliably with the new database entry even after
a clean reboot, I'd just go back to the one that works.




^ permalink raw reply	[flat|nested] 6+ messages in thread

* [9fans] A strange S3 Vision 968 card
@ 1999-05-06  1:23 okamoto
  0 siblings, 0 replies; 6+ messages in thread
From: okamoto @ 1999-05-06  1:23 UTC (permalink / raw)


Thanks Jim, your version worked fine, too.

Now I know there are many variants of Stealth VRAM cards
from Diamond.  Mine was only $28. ^_^

When I changed the line
ramdac=tvp3026-175
to
ramdac=tvp3026-220,
the cursor freesed.  
Is this the difference between vclkphs=1 or not?

Kenji




^ permalink raw reply	[flat|nested] 6+ messages in thread

* [9fans] A strange S3 Vision 968 card
@ 1999-05-05 13:24 jmk
  0 siblings, 0 replies; 6+ messages in thread
From: jmk @ 1999-05-05 13:24 UTC (permalink / raw)


	>Note I've only ever seen a card with a DAC rated up to 175MHz. With 200MHz
	>you should be able to get 1600x1200 and even 1800x1350 if the monitor allows.
Oops, that should have been 220MHz above for 1800x1350.




^ permalink raw reply	[flat|nested] 6+ messages in thread

* [9fans] A strange S3 Vision 968 card
@ 1999-05-05  6:13 okamoto
  0 siblings, 0 replies; 6+ messages in thread
From: okamoto @ 1999-05-05  6:13 UTC (permalink / raw)


I found a strange Video card in second-hand market
in Osaka, which has two large LSI on the card with
2MB VRAM(?) (NEC D482234LE-70x8).  The S3 chip
is written as S3 Vision 968(IABE3) 86C968-P, and
another DAC chip is TVP3026-220PCE.  This card is
named as Diamond Stealth 64 v2.08.

My VGADB, I believe I've patched all, did not recognize
this card after change of identification line.
After struggling a bit, I now realized the following
setting leads me up tp 1376x1024x8 .(I've not tested
1600, because I have 17" monitor :-))

ctlr
	0xC0045="Stealth 64 Video VRAM Vers. 2.08"
	link=vga
	ramdac=tvp3026-220
	ctlr=vision968 linear=1 disalsc=1
	link=ibm8514
	link=s3clock clock=tcp3026clock
	hwgc=tvp3026hwgc

This card has a signature "Made in USA, 1995".
What the name of this card?

Kenji




^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~1999-05-06  3:39 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1999-05-05 13:18 [9fans] A strange S3 Vision 968 card jmk
  -- strict thread matches above, loose matches on Subject: below --
1999-05-06  3:39 okamoto
1999-05-06  3:13 jmk
1999-05-06  1:23 okamoto
1999-05-05 13:24 jmk
1999-05-05  6:13 okamoto

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).