[9fans] No Boot from installCD on IBM xserver 305

[9fans] No Boot from installCD on IBM xserver 305

[nocturnal]

[-- Attachment #1: Type: text/plain, Size: 655 bytes --]

When booting the installcd on my ibm xserve 305 it says;
Bios call failed: bios loading disabled
no plan9.ini
then it gives me a boot from: prompt but it doesn't matter which ide
interface or device i try, it just brings me back to the prompt.
FreeBSD is installed on this particular machine right now and it does in
fact have a floppy so i'm gonna try the floppy too but it would be nice if
someone could look into the source and see why it's giving this BIOS error.
Or just point me to the correct source file if it is available online
somewhere?

-- 


Med vänliga hälsningar

Stefan Midjich aka nocturnal
[SWEHACK] http://swehack.se

[-- Attachment #2: Type: text/html, Size: 858 bytes --]

Re: [9fans] No Boot from installCD on IBM xserver 305

[Sergey Zhilkin]

[-- Attachment #1: Type: text/plain, Size: 1052 bytes --]

Hi !

It seems that Plan9 boot loader doesn't support modern hardware from IBM :(

May be someone from IBM can help :)

P.S.: I have some IBM HS21 servers and I wish to use Plan9 on them.

2009/5/19 nocturnal <swehack@gmail.com>

> When booting the installcd on my ibm xserve 305 it says;
> Bios call failed: bios loading disabled
> no plan9.ini
> then it gives me a boot from: prompt but it doesn't matter which ide
> interface or device i try, it just brings me back to the prompt.
> FreeBSD is installed on this particular machine right now and it does in
> fact have a floppy so i'm gonna try the floppy too but it would be nice if
> someone could look into the source and see why it's giving this BIOS error.
> Or just point me to the correct source file if it is available online
> somewhere?
>
> --
>
>
> Med vänliga hälsningar
>
> Stefan Midjich aka nocturnal
> [SWEHACK] http://swehack.se
>



-- 
С наилучшими пожеланиями
Жилкин Сергей
With best regards
Zhilkin Sergey

[-- Attachment #2: Type: text/html, Size: 1585 bytes --]

Re: [9fans] No Boot from installCD on IBM xserver 305

[erik quanstrom]

> Hi !
>
> It seems that Plan9 boot loader doesn't support modern hardware from IBM :(
>
> May be someone from IBM can help :)
>
> P.S.: I have some IBM HS21 servers and I wish to use Plan9 on them.
>
> 2009/5/19 nocturnal <swehack@gmail.com>

pci (or linux lspci -n) output would be helpful.

- erik

Re: [9fans] No Boot from installCD on IBM xserver 305

[Eric Van Hensbergen]

Sorry, I have HS21's, but I've never tried booting native on them.
Part of the problem will no doubt be that the CDROM is over a USB and
seems to be flakey even when installing certain Linux distros.  My
solution (and the easiest path here) is to just use a virtualization
environment on the blades (or other hardware).

        -eric


On Tue, May 19, 2009 at 3:21 PM, Sergey Zhilkin <szhilkin@gmail.com> wrote:
> Hi !
>
> It seems that Plan9 boot loader doesn't support modern hardware from IBM :(
>
> May be someone from IBM can help :)
>
> P.S.: I have some IBM HS21 servers and I wish to use Plan9 on them.
>
> 2009/5/19 nocturnal <swehack@gmail.com>
>>
>> When booting the installcd on my ibm xserve 305 it says;
>> Bios call failed: bios loading disabled
>> no plan9.ini
>> then it gives me a boot from: prompt but it doesn't matter which ide
>> interface or device i try, it just brings me back to the prompt.
>> FreeBSD is installed on this particular machine right now and it does in
>> fact have a floppy so i'm gonna try the floppy too but it would be nice if
>> someone could look into the source and see why it's giving this BIOS error.
>> Or just point me to the correct source file if it is available online
>> somewhere?
>> --
>>
>>
>> Med vänliga hälsningar
>>
>> Stefan Midjich aka nocturnal
>> [SWEHACK] http://swehack.se
>
>
>
> --
> С наилучшими пожеланиями
> Жилкин Сергей
> With best regards
> Zhilkin Sergey
>

Re: [9fans] No Boot from installCD on IBM xserver 305

[geoff]

Ignore the complaint about the BIOS; it's a red herring.  Lots of
BIOSes have bugs that prevent 9load from booting through them, but
unless you're attempting to boot from bios0 or sdB0, 9load is not
using the BIOS to boot.

Re: [9fans] No Boot from installCD on IBM xserver 305

[Francisco J Ballesteros]

Is anyone using usb cdroms? (with other systems, I mean).
Just curious.

On Wed, May 20, 2009 at 1:05 AM,  <geoff@plan9.bell-labs.com> wrote:
> Ignore the complaint about the BIOS; it's a red herring.  Lots of
> BIOSes have bugs that prevent 9load from booting through them, but
> unless you're attempting to boot from bios0 or sdB0, 9load is not
> using the BIOS to boot.
>
>
>

Re: [9fans] No Boot from installCD on IBM xserver 305

[hiro]

I used to have an usb cd drive, but nowadays plan9 is the only thing I
have which fits on one cd and thus I stopped using this medium.

On Wed, May 20, 2009 at 1:21 AM, Francisco J Ballesteros <nemo@lsub.org> wrote:
> Is anyone using usb cdroms? (with other systems, I mean).
> Just curious.
>
> On Wed, May 20, 2009 at 1:05 AM,  <geoff@plan9.bell-labs.com> wrote:
>> Ignore the complaint about the BIOS; it's a red herring.  Lots of
>> BIOSes have bugs that prevent 9load from booting through them, but
>> unless you're attempting to boot from bios0 or sdB0, 9load is not
>> using the BIOS to boot.
>>
>>
>>
>
>

Re: [9fans] No Boot from installCD on IBM xserver 305

[nocturnal]

[-- Attachment #1: Type: text/plain, Size: 1037 bytes --]

Ok so i'm hearing a lot of "unsupported" here.
I just wanted to mention that when it boots up from the CD it shows boot
devices: fd0 so it seems like only floppy is recognized.

This could be because this DVD-drive is kinda glitchy, FreeBSD had issues
with it too when i installed it but i just kept trying and after a few
timeouts it worked.

I'll just have to get my hands on one of those floppy disks i keep hearing
so much about from my grandfather. ;)

2009/5/20 Francisco J Ballesteros <nemo@lsub.org>

> Is anyone using usb cdroms? (with other systems, I mean).
> Just curious.
>
> On Wed, May 20, 2009 at 1:05 AM,  <geoff@plan9.bell-labs.com> wrote:
> > Ignore the complaint about the BIOS; it's a red herring.  Lots of
> > BIOSes have bugs that prevent 9load from booting through them, but
> > unless you're attempting to boot from bios0 or sdB0, 9load is not
> > using the BIOS to boot.
> >
> >
> >
>
>


-- 


Med vänliga hälsningar

Stefan Midjich aka nocturnal
[SWEHACK] http://swehack.se

[-- Attachment #2: Type: text/html, Size: 1646 bytes --]

Re: [9fans] No Boot from installCD on IBM xserver 305

[Sergey Zhilkin]

[-- Attachment #1: Type: text/plain, Size: 331 bytes --]

How about disk storage ... HS21 have internal SAS controller that is
unsopported by Plan9.


>
> I'll just have to get my hands on one of those floppy disks i keep hearing
> so much about from my grandfather. ;)
>
>
>
>

-- 
С наилучшими пожеланиями
Жилкин Сергей
With best regards
Zhilkin Sergey

[-- Attachment #2: Type: text/html, Size: 630 bytes --]

Re: [9fans] No Boot from installCD on IBM xserver 305

[erik quanstrom]

> Ok so i'm hearing a lot of "unsupported" here.
> I just wanted to mention that when it boots up from the CD it shows boot
> devices: fd0 so it seems like only floppy is recognized.
>
> This could be because this DVD-drive is kinda glitchy, FreeBSD had issues
> with it too when i installed it but i just kept trying and after a few
> timeouts it worked.
>
> I'll just have to get my hands on one of those floppy disks i keep hearing
> so much about from my grandfather. ;)

it's most likely because your ide/sata chipset is not recognized.
if your interested in a solution, the output of lspci -n from linux
or pci from plan 9 would be helpful.

- erik

Re: [9fans] No Boot from installCD on IBM xserver 305

[Sergey Zhilkin]

[-- Attachment #1: Type: text/plain, Size: 1769 bytes --]

2009/5/20 erik quanstrom <quanstro@quanstro.net>

> > Hi !
> >
> > It seems that Plan9 boot loader doesn't support modern hardware from IBM
> :(
> >
> > May be someone from IBM can help :)
> >
> > P.S.: I have some IBM HS21 servers and I wish to use Plan9 on them.
> >
> > 2009/5/19 nocturnal <swehack@gmail.com>
>
> pci (or linux lspci -n) output would be helpful.
>
> - erik
>
> lspci -n from IBM HS21

00:00.0 0600: 8086:25d8 (rev b1)
00:02.0 0604: 8086:25f7 (rev b1)
00:03.0 0604: 8086:25e3 (rev b1)
00:04.0 0604: 8086:25e4 (rev b1)
00:05.0 0604: 8086:25e5 (rev b1)
00:06.0 0604: 8086:25e6 (rev b1)
00:07.0 0604: 8086:25e7 (rev b1)
00:08.0 0880: 8086:1a38 (rev b1)
00:10.0 0600: 8086:25f0 (rev b1)
00:10.1 0600: 8086:25f0 (rev b1)
00:10.2 0600: 8086:25f0 (rev b1)
00:11.0 0600: 8086:25f1 (rev b1)
00:13.0 0600: 8086:25f3 (rev b1)
00:15.0 0600: 8086:25f5 (rev b1)
00:16.0 0600: 8086:25f6 (rev b1)
00:1c.0 0604: 8086:2690 (rev 09)
00:1d.0 0c03: 8086:2688 (rev 09)
00:1d.1 0c03: 8086:2689 (rev 09)
00:1d.2 0c03: 8086:268a (rev 09)
00:1d.7 0c03: 8086:268c (rev 09)
00:1e.0 0604: 8086:244e (rev d9)
00:1f.0 0601: 8086:2670 (rev 09)
00:1f.2 0101: 8086:2680 (rev 09)
01:01.0 0300: 1002:515e (rev 02)
02:00.0 0100: 1000:0056 (rev 02)
03:00.0 0604: 1166:0103 (rev c3)
04:00.0 0200: 14e4:16ac (rev 12)
05:00.0 0604: 1166:0103 (rev c3)
06:00.0 0200: 14e4:16ac (rev 12)
07:00.0 0604: 8086:3500 (rev 01)
07:00.3 0604: 8086:350c (rev 01)
09:00.0 0604: 8086:3510 (rev 01)
09:01.0 0604: 8086:3514 (rev 01)
0c:00.0 0604: 10b5:8114 (rev aa)
0e:00.0 0604: 10b5:8114 (rev aa)
0f:05.0 0100: 9005:8017 (rev 10)



-- 
С наилучшими пожеланиями
Жилкин Сергей
With best regards
Zhilkin Sergey

[-- Attachment #2: Type: text/html, Size: 2310 bytes --]

Re: [9fans] No Boot from installCD on IBM xserver 305

[erik quanstrom]

> > pci (or linux lspci -n) output would be helpful.
> >
> > - erik
> >
> > lspci -n from IBM HS21
[...]

> 00:1f.2 0101: 8086:2680 (rev 09)

i have a couple of cpu servers that use similar hardware.
(at least the 63xxesb southbridge).

the ide driver works with ide drives and the ahci driver
works with sata drives.  on that s.b.  do you get any
messages from either the ide driver or the ahci driver?

i have not tried booting from the livecd in a very long
time.  i would think the sdD0 in plan9.ini would be
a problem with recognized hardware.

- erik

Re: [9fans] No Boot from installCD on IBM xserver 305

[Sergey Zhilkin]

[-- Attachment #1: Type: text/plain, Size: 938 bytes --]

HS21 does't have IDE pinouts and drives. Only QLogic SAS controller and two
SFF SAS Drives
http://en.wikipedia.org/wiki/IBM_BladeCenter#HS21

2009/5/22 erik quanstrom <quanstro@quanstro.net>

> > > pci (or linux lspci -n) output would be helpful.
> > >
> > > - erik
> > >
> > > lspci -n from IBM HS21
> [...]
>
> > 00:1f.2 0101: 8086:2680 (rev 09)
>
> i have a couple of cpu servers that use similar hardware.
> (at least the 63xxesb southbridge).
>
> the ide driver works with ide drives and the ahci driver
> works with sata drives.  on that s.b.  do you get any
> messages from either the ide driver or the ahci driver?
>
> i have not tried booting from the livecd in a very long
> time.  i would think the sdD0 in plan9.ini would be
> a problem with recognized hardware.
>
> - erik
>
>


-- 
С наилучшими пожеланиями
Жилкин Сергей
With best regards
Zhilkin Sergey

[-- Attachment #2: Type: text/html, Size: 1452 bytes --]

Re: [9fans] No Boot from installCD on IBM xserver 305

[Steve Simon]

> lspci -n from IBM HS21

00:00.0 0600: 8086:25d8 (rev b1)
	Intel Corporation
00:02.0 0604: 8086:25f7 (rev b1)
	Intel Corporation
00:03.0 0604: 8086:25e3 (rev b1)
	Intel Corporation
00:04.0 0604: 8086:25e4 (rev b1)
	Intel Corporation
00:05.0 0604: 8086:25e5 (rev b1)
	Intel Corporation
00:06.0 0604: 8086:25e6 (rev b1)
	Intel Corporation
00:07.0 0604: 8086:25e7 (rev b1)
	Intel Corporation
00:08.0 0880: 8086:1a38 (rev b1)
	Intel Corporation 5000P 5000 Series Chipset DMA Engine
00:10.0 0600: 8086:25f0 (rev b1)
	Intel Corporation
00:10.1 0600: 8086:25f0 (rev b1)
	Intel Corporation
00:10.2 0600: 8086:25f0 (rev b1)
	Intel Corporation
00:11.0 0600: 8086:25f1 (rev b1)
	Intel Corporation
00:13.0 0600: 8086:25f3 (rev b1)
	Intel Corporation
00:15.0 0600: 8086:25f5 (rev b1)
	Intel Corporation
00:16.0 0600: 8086:25f6 (rev b1)
	Intel Corporation
00:1c.0 0604: 8086:2690 (rev 09)
	Intel Corporation
00:1d.0 0c03: 8086:2688 (rev 09)
	Intel Corporation
00:1d.1 0c03: 8086:2689 (rev 09)
	Intel Corporation
00:1d.2 0c03: 8086:268a (rev 09)
	Intel Corporation
00:1d.7 0c03: 8086:268c (rev 09)
	Intel Corporation
00:1e.0 0604: 8086:244e (rev d9)
	Intel Corporation 82801DB Hub Interface to PCI Bridge
00:1f.0 0601: 8086:2670 (rev 09)
	Intel Corporation
00:1f.2 0101: 8086:2680 (rev 09)
	Intel Corporation
01:01.0 0300: 1002:515e (rev 02)
	ATI  Technologies  Inc. Radeon ES1000 Radeon ES1000
02:00.0 0100: 1000:0056 (rev 02)
	LSI Logic LSISAS1064ET PCI-Express Fusion-MPT SAS
03:00.0 0604: 1166:0103 (rev c3)
	Broadcom / ServerWorks BCM5715 Broadcom dual gigabit, pci bridge
04:00.0 0200: 14e4:16ac (rev 12)
	Broadcom Corporation
05:00.0 0604: 1166:0103 (rev c3)
	Broadcom / ServerWorks BCM5715 Broadcom dual gigabit, pci bridge
06:00.0 0200: 14e4:16ac (rev 12)
	Broadcom Corporation
07:00.0 0604: 8086:3500 (rev 01)
	Intel Corporation
07:00.3 0604: 8086:350c (rev 01)
	Intel Corporation
09:00.0 0604: 8086:3510 (rev 01)
	Intel Corporation
09:01.0 0604: 8086:3514 (rev 01)
	Intel Corporation
0c:00.0 0604: 10b5:8114 (rev aa)
	PLX Technology Inc.
0e:00.0 0604: 10b5:8114 (rev aa)
	PLX Technology Inc.
0f:05.0 0100: 9005:8017 (rev 10)
	Adaptec Inc ASC-29320ALP Ultra320 SCSI Controller

Broadcom GigE - these are a problem, as I understand it 
Broadcom will not supply register level programming info for
their chipsets except under NDA.

and as these are blades you have no chance to plug in a
supported PCI NIC.

☹

-Steve

Re: [9fans] No Boot from installCD on IBM xserver 305

[blstuart]

> 	Broadcom / ServerWorks BCM5715 Broadcom dual gigabit, pci bridge
> 04:00.0 0200: 14e4:16ac (rev 12)
> 	Broadcom Corporation
> 05:00.0 0604: 1166:0103 (rev c3)
> 	Broadcom / ServerWorks BCM5715 Broadcom dual gigabit, pci bridge
>
> Broadcom GigE - these are a problem, as I understand it
> Broadcom will not supply register level programming info for
> their chipsets except under NDA.
>
> and as these are blades you have no chance to plug in a
> supported PCI NIC.

Actually, they have.  I'm pretty sure it was on this list
that someone sent a link to the docs.  I started working
on a 57xx driver, but got side-tracked and no longer
have access to one of the machines I was using.  Maybe
I can pop it off my task stack someday...

BLS

Re: [9fans] No Boot from installCD on IBM xserver 305

[Mathieu L.]

> and as these are blades you have no chance to plug in a
> supported PCI NIC.

Hello,

I don't know if that's relevant but I had no problem pluging in a
supported PCI NIC card in my IBM eserver 325, after I found out the
default (broadcom too I think) one was not supported.

3.4.0:	net  02.00.00 8086/1229   7 0:fe020000 4096 1:00003001 64 2:fe000000 131072
	Intel 82557/8/9/0/1 Fast Ethernet LAN Controller

Cheers,
Mathieu

Re: [9fans] No Boot from installCD on IBM xserver 305

[Sergey Zhilkin]

[-- Attachment #1: Type: text/plain, Size: 3310 bytes --]

I have an PCI expansion unit.  Adaptec Inc ASC-29320ALP Ultra320 SCSI
Controller is lpuggit in it, and second port is free :) It's not a
problem... Problem is with  LSI Logic LSISAS1064ET PCI-Express Fusion-MPT
SAS :)

2009/5/22 Steve Simon <steve@quintile.net>

> > lspci -n from IBM HS21
>
> 00:00.0 0600: 8086:25d8 (rev b1)
>         Intel Corporation
> 00:02.0 0604: 8086:25f7 (rev b1)
>         Intel Corporation
> 00:03.0 0604: 8086:25e3 (rev b1)
>         Intel Corporation
> 00:04.0 0604: 8086:25e4 (rev b1)
>         Intel Corporation
> 00:05.0 0604: 8086:25e5 (rev b1)
>         Intel Corporation
> 00:06.0 0604: 8086:25e6 (rev b1)
>         Intel Corporation
> 00:07.0 0604: 8086:25e7 (rev b1)
>         Intel Corporation
> 00:08.0 0880: 8086:1a38 (rev b1)
>         Intel Corporation 5000P 5000 Series Chipset DMA Engine
> 00:10.0 0600: 8086:25f0 (rev b1)
>         Intel Corporation
> 00:10.1 0600: 8086:25f0 (rev b1)
>         Intel Corporation
> 00:10.2 0600: 8086:25f0 (rev b1)
>         Intel Corporation
> 00:11.0 0600: 8086:25f1 (rev b1)
>         Intel Corporation
> 00:13.0 0600: 8086:25f3 (rev b1)
>         Intel Corporation
> 00:15.0 0600: 8086:25f5 (rev b1)
>         Intel Corporation
> 00:16.0 0600: 8086:25f6 (rev b1)
>         Intel Corporation
> 00:1c.0 0604: 8086:2690 (rev 09)
>         Intel Corporation
> 00:1d.0 0c03: 8086:2688 (rev 09)
>         Intel Corporation
> 00:1d.1 0c03: 8086:2689 (rev 09)
>         Intel Corporation
> 00:1d.2 0c03: 8086:268a (rev 09)
>         Intel Corporation
> 00:1d.7 0c03: 8086:268c (rev 09)
>         Intel Corporation
> 00:1e.0 0604: 8086:244e (rev d9)
>         Intel Corporation 82801DB Hub Interface to PCI Bridge
> 00:1f.0 0601: 8086:2670 (rev 09)
>         Intel Corporation
> 00:1f.2 0101: 8086:2680 (rev 09)
>         Intel Corporation
> 01:01.0 0300: 1002:515e (rev 02)
>         ATI  Technologies  Inc. Radeon ES1000 Radeon ES1000
> 02:00.0 0100: 1000:0056 (rev 02)
>         LSI Logic LSISAS1064ET PCI-Express Fusion-MPT SAS
> 03:00.0 0604: 1166:0103 (rev c3)
>         Broadcom / ServerWorks BCM5715 Broadcom dual gigabit, pci bridge
> 04:00.0 0200: 14e4:16ac (rev 12)
>         Broadcom Corporation
> 05:00.0 0604: 1166:0103 (rev c3)
>         Broadcom / ServerWorks BCM5715 Broadcom dual gigabit, pci bridge
> 06:00.0 0200: 14e4:16ac (rev 12)
>         Broadcom Corporation
> 07:00.0 0604: 8086:3500 (rev 01)
>         Intel Corporation
> 07:00.3 0604: 8086:350c (rev 01)
>         Intel Corporation
> 09:00.0 0604: 8086:3510 (rev 01)
>         Intel Corporation
> 09:01.0 0604: 8086:3514 (rev 01)
>         Intel Corporation
> 0c:00.0 0604: 10b5:8114 (rev aa)
>         PLX Technology Inc.
> 0e:00.0 0604: 10b5:8114 (rev aa)
>         PLX Technology Inc.
> 0f:05.0 0100: 9005:8017 (rev 10)
>         Adaptec Inc ASC-29320ALP Ultra320 SCSI Controller
>
> Broadcom GigE - these are a problem, as I understand it
> Broadcom will not supply register level programming info for
> their chipsets except under NDA.
>
> and as these are blades you have no chance to plug in a
> supported PCI NIC.
>
> ☹
>
> -Steve
>
>


-- 
С наилучшими пожеланиями
Жилкин Сергей
With best regards
Zhilkin Sergey

[-- Attachment #2: Type: text/html, Size: 4767 bytes --]

Re: [9fans] No Boot from installCD on IBM xserver 305

[erik quanstrom]

On Sat May 23 02:16:59 EDT 2009, szhilkin@gmail.com wrote:

> I have an PCI expansion unit.  Adaptec Inc ASC-29320ALP Ultra320 SCSI
> Controller is lpuggit in it, and second port is free :) It's not a
> problem... Problem is with  LSI Logic LSISAS1064ET PCI-Express Fusion-MPT
> SAS :)

the lsi 1068 series sata/sas controllers are not currently
supported.  they looked moer complicated than competing
products.

if any combined mode sata/sas controller will do, you can
use something based on the marvell orion (88se64xx).
there's a driver in my contrib quanstro/sd.

- erik

Re: [9fans] No Boot from installCD on IBM xserver 305

[Balwinder S Dheeman]

On 05/20/2009 02:04 AM, erik quanstrom wrote:
>> Hi !
>>
>> It seems that Plan9 boot loader doesn't support modern hardware from IBM :(
>>
>> May be someone from IBM can help :)
>>
>> P.S.: I have some IBM HS21 servers and I wish to use Plan9 on them.
>>
>> 2009/5/19 nocturnal <swehack@gmail.com>
>
> pci (or linux lspci -n) output would be helpful.

I somehow, managed to install Plan 9 with the help of QEMU on a Lenovo
machine, because 9load did not recognize DVD-RW on SATA bus, which
indeed is configured in IDE Mode --

Product: IdeaCentre K200 5312-3CQ
Operating system: GNU/Linux (Arch, Debian/testing), FreeBSD 8.0-CURRENT
and XP/SP3 are working fine.

Original description: Intel� Core 2 Duo Processor E4600, 2GB, 250GB
7200RPM SATA HDD, no diskette drive, PCI/PCIe Tower (4x4), Integrated
SiS Mirage3, 16x DVD-RW, 56K modem, 100/1000 Ethernet, DOS License

[bdheeman@werc ~]$ lspci -n
00:00.0 0600: 1039:0671
00:01.0 0604: 1039:0003
00:02.0 0601: 1039:0968 (rev 01)
00:02.5 0101: 1039:5513 (rev 01)
00:03.0 0c03: 1039:7001 (rev 0f)
00:03.1 0c03: 1039:7001 (rev 0f)
00:03.3 0c03: 1039:7002
00:05.0 0101: 1039:1183 (rev 03)
00:06.0 0604: 1039:000a
00:07.0 0604: 1039:000a
00:0d.0 0200: 10ec:8185 (rev 20)
00:0e.0 0780: 14f1:2f20
00:0f.0 0403: 1039:7502
00:1f.0 0604: 1039:0004
01:00.0 0300: 1039:6351 (rev 10)
03:00.0 0200: 10ec:8136 (rev 01)

Though, I'm not an expert kernel programmer, but I shall be happy to
follow leads and, or pointers on making this work.

I think, I need to add some quirks in /sys/src/boot/pc/sd{ata|bios}.c
and /sys/src/9/pc/sdata.c as well. I however, am wondering, where the
/sys/src/9/pc/sdbios.c is?

--
Balwinder S "bdheeman" Dheeman        Registered Linux User: #229709
Anu'z Linux@HOME (Unix Shoppe)        Machines: #168573, 170593, 259192
Chandigarh, UT, 160062, India         Plan9, T2, Arch/Debian/FreeBSD/XP
Home: http://werc.homelinux.net/      Visit: http://counter.li.org/

Re: [9fans] No Boot from installCD on IBM xserver 305

[erik quanstrom]

> I think, I need to add some quirks in /sys/src/boot/pc/sd{ata|bios}.c

i think instead you need to add this line

	case case (0x1183<<16)|0x1039:	/* SiS 966 */

to sdata.c after the existing sis entry.

> and /sys/src/9/pc/sdata.c as well. I however, am wondering, where the
> /sys/src/9/pc/sdbios.c is?

there is none.

- erik