From: Eli Cohen <echoline@gmail.com>
To: 9fans <9fans@9fans.net>
Subject: Re: [9fans] building blocks speaking 9p
Date: Fri, 28 Jan 2022 13:27:26 -0800 [thread overview]
Message-ID: <CAHwi9bzw4OSCFqK+7Fh2EFzcWqTxQgTBsoe_LXrDbSeJyMBgZw@mail.gmail.com> (raw)
In-Reply-To: <20220128211653.7EC84804472@smtp.hushmail.com>
[-- Attachment #1: Type: text/plain, Size: 2901 bytes --]
hmmm. but for all of the devdraw fs and image backing, etc? can it access
RAM?
On Fri, Jan 28, 2022, 1:18 PM Tony Mendoza <clueelf@tonymendoza.us> wrote:
> Eli said - "...accelerated hardware devdraw on the fpga if that's even
> possible"
>
> It's possible.
>
> https://projectf.io/posts/fpga-graphics/
>
> T
>
> On 1/28/2022 at 3:08 PM, "Eli Cohen" <echoline@gmail.com> wrote:
>
> I started working on a project with an ESP32 board (with a toolchain for
> linux) to make a /net/etherESP32 for wifi with 9P right on the little
> board. I got as far as realizing how different 802.11 and 802.3 are...
>
> the unfinished code is at https://github.com/echoline/etherESP32
>
> it would be cool to see an aijuboard with accelerated hardware devdraw on
> the fpga if that's even possible, or other hardware like that
>
> On Fri, Jan 28, 2022, 1:01 PM Tony Mendoza <clueelf@tonymendoza.us> wrote:
>
>> Sorry wrong libstyx repo
>>
>> https://github.com/inferno-os/inferno-os/tree/master/tools/libstyx
>>
>> T
>>
>> On 1/28/2022 at 2:54 PM, "Tony Mendoza" <clueelf@tonymendoza.us> wrote:
>>
>> A few years back I started trying to build something similar off of the
>> STM32F4 line of ARM MCUs.
>>
>> https://www.st.com/en/microcontrollers-microprocessors/stm32f4-series.html
>>
>> Supports ethernet, spi, usb otg, etc. Thought about porting the libstyx
>> library from Inferno over to
>> the STM32 platform.
>>
>> https://github.com/inferno-os/inferno-os/tree/master/tools/styxtest
>>
>> Thin OS layer was provided by FreeRTOS. STM32F4 specific HW was accessed
>> using libopencm3
>>
>> https://libopencm3.org/
>>
>> If interested...
>>
>> https://github.com/tmendoza/stm32f4-template
>>
>> Tony
>>
>> On 1/28/2022 at 4:18 AM, "Lucio De Re" <lucio.dere@gmail.com> wrote:
>>
>> On 1/28/22, Bakul Shah <bakul@iitbombay.org> wrote:
>> >
>> > Think of really simple, low power, low cost devices.
>> > USB can also provide power. USB+ATtiny85 devel boards
>> > cost ~$3 even at Amazon. And FPGA boards can be
>> > pretty inexpensive too. If you can find them.
>> >
>> I've recommended olimex.com in the past. They specialise in Open
>> Architecture Hardware. Their prices are very reasonable and product
>> range quite broad.
>>
>> Lucio.
>>
>> *9fans <https://9fans.topicbox.com/latest>* / 9fans / see discussions
> <https://9fans.topicbox.com/groups/9fans> + participants
> <https://9fans.topicbox.com/groups/9fans/members> + delivery options
> <https://9fans.topicbox.com/groups/9fans/subscription> Permalink
> <https://9fans.topicbox.com/groups/9fans/Ta4e584a373b05553-Mb0d91d78bd0ccb6b864611c7>
>
------------------------------------------
9fans: 9fans
Permalink: https://9fans.topicbox.com/groups/9fans/Ta4e584a373b05553-M7c105b558e297b07d1ace778
Delivery options: https://9fans.topicbox.com/groups/9fans/subscription
[-- Attachment #2: Type: text/html, Size: 5937 bytes --]
next prev parent reply other threads:[~2022-01-28 21:28 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-27 22:57 Bakul Shah
2022-01-28 2:55 ` Thaddeus Woskowiak
2022-01-28 3:31 ` Lucio De Re
2022-01-28 5:16 ` Bakul Shah
2022-01-28 10:16 ` Lucio De Re
2022-01-28 19:01 ` Charles Forsyth
2022-01-28 21:26 ` Bakul Shah
2022-01-28 21:37 ` Eli Cohen
2022-01-28 20:54 ` Tony Mendoza
2022-01-28 20:59 ` Tony Mendoza
2022-01-28 21:03 ` ori
2022-01-28 21:07 ` Tony Mendoza
2022-01-28 21:06 ` Eli Cohen
2022-01-28 21:16 ` Tony Mendoza
2022-01-28 21:27 ` Eli Cohen [this message]
2022-01-28 21:33 ` david
2022-01-28 21:46 ` Tony Mendoza
2022-01-28 22:23 ` David Boddie
2022-01-29 1:04 ` Lyndon Nerenberg (VE7TFX/VE6BBM)
2022-01-29 2:08 ` David Boddie
2022-01-29 3:36 ` Tony Mendoza
2022-01-29 18:03 ` David Boddie
2022-01-29 2:32 ` Thaddeus Woskowiak
2022-01-29 20:04 ` [9fans] aiju boards Lyndon Nerenberg (VE7TFX/VE6BBM)
2022-01-28 19:32 ` [9fans] building blocks speaking 9p Kent R. Spillner
2022-01-28 4:54 ` ori
2022-01-28 20:55 ` Lyndon Nerenberg (VE7TFX/VE6BBM)
2022-01-29 9:16 ` Skip Tavakkolian
2022-01-29 11:56 ` Frank D. Engel, Jr.
2022-01-29 12:14 ` Frank D. Engel, Jr.
2022-01-29 12:30 ` Frank D. Engel, Jr.
2022-01-29 13:24 ` cinap_lenrek
2022-02-15 3:07 ` Lyndon Nerenberg (VE7TFX/VE6BBM)
2022-01-29 20:53 Lyndon Nerenberg (VE7TFX/VE6BBM)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAHwi9bzw4OSCFqK+7Fh2EFzcWqTxQgTBsoe_LXrDbSeJyMBgZw@mail.gmail.com \
--to=echoline@gmail.com \
--cc=9fans@9fans.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).