[9fans] Plan9 questions and quarrel

[9fans] Plan9 questions and quarrel

[w0rd 2 th3]

Here're questions about the iPAQ version..
1/ Does it support the CF Sleeve? (Compact Flash)
2/ How stable is it?
3/ Is it limited at all to what the x86 version can do? Or can it do exactly 
what you can do on a normal PC?

Now, I have a Thinkpad R31, and I tried booting the Plan9 CD to start it but 
it gives me a kernel panic.. I can't exactly describe it just yet but it 
wouldn't even boot, it prompts me about the settings like resolution and 
such and I go with the default-- and then I get the panic.
I hope that someone could help me with these questions and this quarrel, 
which I will go into detail soon.
Thanks.

_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online 
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

Re: [9fans] Plan9 questions and quarrel

[gdiaz]

Hello

your panic is due (may be) to aux/vga. It does'nt have driver to your card.
R31 have a radeon mobility isn't it?

you need to patch your kernel with radeon support, search 9fans archives for 
radeon support.

i hope that help you.

PS: i haven't ipaq, but you should be able to run most of applications.



> Here're questions about the iPAQ version..
> 1/ Does it support the CF Sleeve? (Compact Flash)
> 2/ How stable is it?
> 3/ Is it limited at all to what the x86 version can do? Or can it do exactly
> 
> what you can do on a normal PC?
> 
> Now, I have a Thinkpad R31, and I tried booting the Plan9 CD to start it but
> 
> it gives me a kernel panic.. I can't exactly describe it just yet but it 
> wouldn't even boot, it prompts me about the settings like resolution and 
> such and I go with the default-- and then I get the panic.
> I hope that someone could help me with these questions and this quarrel, 
> which I will go into detail soon.
> Thanks.
> 
> _________________________________________________________________
> Protect your PC - get McAfee.com VirusScan Online 
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
> 
> 

Re: [9fans] Plan9 questions and quarrel

[Fco.J.Ballesteros]

> Here're questions about the iPAQ version..
> 1/ Does it support the CF Sleeve? (Compact Flash)

Not that I know. Some of us used it with a pcmcia backpack.

> 2/ How stable is it?

It was stable the last time I used, but don't know today.

> 3/ Is it limited at all to what the x86 version can do? Or can it do exactly 
> what you can do on a normal PC?

I could do (almost) anything I could do with the PC.

If you decide to try it out, drop a line if you need help.

Re: [9fans] Bitsy questions (was: Plan 9 questions and quarrel)

[Axel Belinfante]

> > Here're questions about the iPAQ version..
> > 1/ Does it support the CF Sleeve? (Compact Flash)

> Not that I know. Some of us used it with a pcmcia backpack.

For what it is worth:
I succeeded to lift linux (I think: actually, bootloader)
code to make the already existing (single) pcmcia sleeve code
work (more or less, yes, this is vague)
with a double-slot pcmcia sleeve.
Maybe it is possible to do something similar for the CF Sleeve.

W.r.t. stability:
for me it was (is) stable, but suspend/resume does not work.
Others had more success in this respect; could be related
to different versions of bootloader being used, I don't
recall seeing that this was explored 'to the bottom'.



A somewhat related question:

Is the support for pcmcia disks only in the
ipaq (bitsy) kernel, or also in the pc one?

(I tried over a year ago, and then it worked on
 ipaq and not on a laptop, and I'm wondering
 if that was due to erroneous config on my side,
 or simply because it is (was?) not supported)
(it was a toshiba MK5002MPL)

Axel.

Re: [9fans] Bitsy questions (was: Plan 9 questions and quarrel)

[Fco.J.Ballesteros]

> Is the support for pcmcia disks only in the
> ipaq (bitsy) kernel, or also in the pc one?
> 
> (I tried over a year ago, and then it worked on
>  ipaq and not on a laptop, and I'm wondering
>  if that was due to erroneous config on my side,
>  or simply because it is (was?) not supported)
> (it was a toshiba MK5002MPL)

I used my toshiba(!!) disk in the PC too. Had to change sdata.c to recognize it.
I think the change is in 9fans.

Re: [9fans] Bitsy questions (was: Plan 9 questions and quarrel)

[jmk]

On Tue Mar  9 10:09:42 EST 2004, Axel.Belinfante@cs.utwente.nl wrote:
> ...
> A somewhat related question:
> 
> Is the support for pcmcia disks only in the
> ipaq (bitsy) kernel, or also in the pc one?
> 
> (I tried over a year ago, and then it worked on
>  ipaq and not on a laptop, and I'm wondering
>  if that was due to erroneous config on my side,
>  or simply because it is (was?) not supported)
> (it was a toshiba MK5002MPL)
> 
> Axel.
> 

there is some disabled code in pc/sdata.c which i put in just to see
if it would work:

if(0){
	...
	/*
	 * Hack for PCMCIA drives.
	 * This will be tidied once we figure out how the whole
	 * removeable device thing is going to work.
	 */
	...

--jim

Re: [9fans] Bitsy questions

[Axel Belinfante]

[-- Attachment #1: Type: text/plain, Size: 1503 bytes --]

I asked:
> > Is the support for pcmcia disks only in the
> > ipaq (bitsy) kernel, or also in the pc one?

and jmk replied:

> there is some disabled code in pc/sdata.c which i put in just to see
> if it would work:

thanks! I have it working now.
took me (quite) some time to find working  numbers for port and irq.
I tried guessing them using info from aux/pcmcia, /dev/irqalloc and
/dev/ioalloc, I suppose I'm not smart at this.
Is there a better way?

I choose the first default configuration from aux/pcmcia --
naive question alert :-)   just curious:
Are there in general reasons to favor one over the other?
(I attach the output of aux/pcmcia at the end)

Somehow this worked more automatic on the bitsy, I recall.
Is life easier on the bitsy wrt automatic choosing irq's?
Or has more effort (default irq's) been put in for the bitsy?
(I know/think more effort has been put in there wrt the possibility
 of sending a configure command to - what was it? - pcm?ctl ?)

Rephrased/Related: just curious: are there intrincic
differences between the bitsy and the pc that make things
easier in one place and harder in another?

For sake of completeness, for my laptop the following
(inserted at the right place in sdata.c) made it work.
I really have no idea how generally useful the irq is.

	if(channel == -1) {
		isa.port = 0x200;		/* toshiba tecra 8000 */
		isa.irq = 10;			/* toshiba tecra 8000 */
		channel = pcmspecial("MK5002MPL", &isa);
	}


Axel.



[-- Attachment #2: mk5002mpl --]
[-- Type: text/plain , Size: 1316 bytes --]

device 2048 bytes of 100ns IO+MEM
version 4.1
	TOSHIBA
	MK5002MPL
configuration registers at (0)0x200 (1)0x202 (2)0x204 (3)0x206
configuration 0 (default)
	memory device,  Ready/Busy active Memory Wait required
	Vcc:  Vnominal 5000000uV Iavg 400mA Ipeak 500mA Ipowerdown 60mA
	memory address range 0x0 - 0x800
configuration 0
	Vcc:  Vnominal 3300000uV Ipeak 500mA
configuration 1 (default)
	I/O device,  Ready/Busy active
	Vcc:  Vnominal 5000000uV Iavg 400mA Ipeak 500mA Ipowerdown 60mA
	IO space 4 address lines selectable 8bit or 8&16bit access
	interrupts:level:pulse:shared, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
configuration 1
	Vcc:  Vnominal 3300000uV Ipeak 500mA
configuration 2 (default)
	I/O device,  Ready/Busy active
	Vcc:  Vnominal 5000000uV Iavg 400mA Ipeak 500mA Ipowerdown 60mA
	IO space 10 address lines selectable 8bit or 8&16bit access
		1f0 - 1f7
		3f6 - 3f7
	interrupts:level:pulse:shared, 14
configuration 2
	Vcc:  Vnominal 3300000uV Ipeak 500mA
configuration 3 (default)
	I/O device,  Ready/Busy active
	Vcc:  Vnominal 5000000uV Iavg 400mA Ipeak 500mA Ipowerdown 60mA
	IO space 10 address lines selectable 8bit or 8&16bit access
		170 - 177
		376 - 377
	interrupts:level:pulse:shared, 14
configuration 3
	Vcc:  Vnominal 3300000uV Ipeak 500mA

Re: [9fans] Bitsy questions

[Fco.J.Ballesteros]

> Is life easier on the bitsy wrt automatic choosing irq's?

I'm not responsible for any of the sdata drivers (I think jmk did
both), but I found the bitsy a lot cleaner than the PC.

Re: [9fans] Bitsy questions

[Geoff Collyer]

[-- Attachment #1: Type: text/plain, Size: 335 bytes --]

Not too surprising; the PC has ~20 years of legacy cruft to be
compatible with.  Our ata drivers would probably drive ST506 disks if
any could be found.

 From a fortune file:
Backward compatibility means never being able to say 'that was a mistake'.
If you build for compatibility with a donkey cart, you don't get a Concorde.

[-- Attachment #2: Type: message/rfc822, Size: 1918 bytes --]

From: Fco.J.Ballesteros <nemo@lsub.org>
To: 9fans@cse.psu.edu
Subject: Re: [9fans] Bitsy questions
Date: Mon, 15 Mar 2004 10:38:20 +0100
Message-ID: <cacf87ec40a9bf33f6d6a29246d7f501@plan9.escet.urjc.es>

> Is life easier on the bitsy wrt automatic choosing irq's?

I'm not responsible for any of the sdata drivers (I think jmk did
both), but I found the bitsy a lot cleaner than the PC.

Re: [9fans] Bitsy questions

[Derek Fawcus]

On Mon, Mar 15, 2004 at 01:46:46AM -0800, Geoff Collyer wrote:
> Not too surprising; the PC has ~20 years of legacy cruft to be
> compatible with.  Our ata drivers would probably drive ST506 disks if
> any could be found.

Well I've got one in the cupboard behind me.  A 5 1/4" Full Height beast,
70 or 80 MB if I recall.  Now where is that controller card...

DF

Re: [9fans] Bitsy questions

[lucio]

> Well I've got one in the cupboard behind me.  A 5 1/4" Full Height beast,
> 70 or 80 MB if I recall.  Now where is that controller card...
> 
How many controller cards do you need?  I can give you a few
choices...

++L