* Re: [9fans] New 9front image for raspberry pi @ 2017-01-09 3:17 kokamoto 2017-01-15 6:16 ` [9front] " kokamoto 0 siblings, 1 reply; 9+ messages in thread From: kokamoto @ 2017-01-09 3:17 UTC (permalink / raw) To: 9front I still have blocked mail problem tp 9fans.net, then, I sent this to 9front.org instead. As I got rpi3 type B model, I'm trying to use your source. At present, I've got success for old rapsberry 1 model. I replaced 9pif, bootcode.bin start.elf etc by your new ones. Thank you very much for your work. This mail was written from rpi terminal. Kenji PS. for rpi3 I have to get a new power supply (larger than 3A). ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-09 3:17 [9fans] New 9front image for raspberry pi kokamoto @ 2017-01-15 6:16 ` kokamoto 2017-01-15 13:13 ` Chris McGee 0 siblings, 1 reply; 9+ messages in thread From: kokamoto @ 2017-01-15 6:16 UTC (permalink / raw) To: 9front > PS. for rpi3 I have to get a new power supply (larger than 3A). Ok, I got 3.1A power supply from TechShare Inc. Yes, now I'm using rpi3 here, and I can use '日本語も出来るよ' I started from the Miller's new image(9pi.img.gz) at sources/contrib/miller, and replaced/or added files of fixup.data, start.elf start_cd.elf, fixup_cd.dat etc. 9pif2 was compiled using newton's bcm files. Kenji ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-15 6:16 ` [9front] " kokamoto @ 2017-01-15 13:13 ` Chris McGee 2017-01-15 17:54 ` Steve Simon 2017-01-16 0:01 ` kokamoto 0 siblings, 2 replies; 9+ messages in thread From: Chris McGee @ 2017-01-15 13:13 UTC (permalink / raw) To: 9front I'm still working out some USB kinks. Have you had any keyboard problems? Did you compile/run with 9front? Thanks, Chris On Jan 15, 2017, at 1:16 AM, kokamoto@hera.eonet.ne.jp wrote: >> PS. for rpi3 I have to get a new power supply (larger than 3A). > > Ok, I got 3.1A power supply from TechShare Inc. > Yes, now I'm using rpi3 here, and I can use '日本語も出来るよ' > > I started from the Miller's new image(9pi.img.gz) at sources/contrib/miller, > and replaced/or added files of fixup.data, start.elf start_cd.elf, fixup_cd.dat > etc. 9pif2 was compiled using newton's bcm files. > > Kenji > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-15 13:13 ` Chris McGee @ 2017-01-15 17:54 ` Steve Simon 2017-01-16 0:01 ` kokamoto 1 sibling, 0 replies; 9+ messages in thread From: Steve Simon @ 2017-01-15 17:54 UTC (permalink / raw) To: 9front any plans to port the audio driver? -Steve > On 15 Jan 2017, at 13:13, Chris McGee <sirnewton_01@yahoo.ca> wrote: > > I'm still working out some USB kinks. Have you had any keyboard problems? Did you compile/run with 9front? > > Thanks, > Chris > > On Jan 15, 2017, at 1:16 AM, kokamoto@hera.eonet.ne.jp wrote: > >>> PS. for rpi3 I have to get a new power supply (larger than 3A). >> >> Ok, I got 3.1A power supply from TechShare Inc. >> Yes, now I'm using rpi3 here, and I can use '日本語も出来るよ' >> >> I started from the Miller's new image(9pi.img.gz) at sources/contrib/miller, >> and replaced/or added files of fixup.data, start.elf start_cd.elf, fixup_cd.dat >> etc. 9pif2 was compiled using newton's bcm files. >> >> Kenji >> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-15 13:13 ` Chris McGee 2017-01-15 17:54 ` Steve Simon @ 2017-01-16 0:01 ` kokamoto 2017-01-16 0:11 ` Chris McGee 1 sibling, 1 reply; 9+ messages in thread From: kokamoto @ 2017-01-16 0:01 UTC (permalink / raw) To: 9front > I'm still working out some USB kinks. Have you had any keyboard problems? Did you compile/run with 9front Thank you verry much, Chris. Yes, I'm using the 9pif2 kernel for terminal (now using it) with root from tcp. I'm glad to see 4 cores here! Yes, I have a problem to use Japanese USB keyboard. I can use it for typing '_' '|' by patching by myself (it may not be needed for another country). I have one problem to use it, that is seeing chattering of keyinput, such that secstore: WHC where I did not type anything before that prompt. Kenji ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-16 0:01 ` kokamoto @ 2017-01-16 0:11 ` Chris McGee 2017-01-16 0:38 ` kokamoto 0 siblings, 1 reply; 9+ messages in thread From: Chris McGee @ 2017-01-16 0:11 UTC (permalink / raw) To: 9front Thanks for trying it out. I'm not sure about the Japanese keyboard, but that key input chattering problem is the one I'm currently hunting. If anyone can spot the flaw in the usbdwc.c, trap.c or clock.c it would be a great help. Meanwhile, I'll keep looking at it myself, if slowly. Chris On Jan 15, 2017, at 7:01 PM, kokamoto@hera.eonet.ne.jp wrote: >> I'm still working out some USB kinks. Have you had any keyboard problems? Did you compile/run with 9front > > Thank you verry much, Chris. > > Yes, I'm using the 9pif2 kernel for terminal (now using it) > with root from tcp. I'm glad to see 4 cores here! > > Yes, I have a problem to use Japanese USB keyboard. > I can use it for typing '_' '|' by patching by myself > (it may not be needed for another country). > > I have one problem to use it, that is seeing chattering of keyinput, > such that > secstore: WHC > where I did not type anything before that prompt. > > Kenji > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-16 0:11 ` Chris McGee @ 2017-01-16 0:38 ` kokamoto 2017-01-16 0:45 ` Chris McGee 0 siblings, 1 reply; 9+ messages in thread From: kokamoto @ 2017-01-16 0:38 UTC (permalink / raw) To: 9front The mouse input also freezes some time. When I playes with games/mahjonng, it occures. It may be recovered when I wait some time, and tries it onece again. Probabley usb driver has something problem? Kenji > Thanks for trying it out. I'm not sure about the Japanese keyboard, but that key input chattering problem is the one I'm currently hunting. > > If anyone can spot the flaw in the usbdwc.c, trap.c or clock.c it would be a great help. Meanwhile, I'll keep looking at it myself, if slowly. > > Chris > > On Jan 15, 2017, at 7:01 PM, kokamoto@hera.eonet.ne.jp wrote: > >>> I'm still working out some USB kinks. Have you had any keyboard problems? Did you compile/run with 9front >> >> Thank you verry much, Chris. >> >> Yes, I'm using the 9pif2 kernel for terminal (now using it) >> with root from tcp. I'm glad to see 4 cores here! >> >> Yes, I have a problem to use Japanese USB keyboard. >> I can use it for typing '_' '|' by patching by myself >> (it may not be needed for another country). >> >> I have one problem to use it, that is seeing chattering of keyinput, >> such that >> secstore: WHC >> where I did not type anything before that prompt. >> >> Kenji >> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-16 0:38 ` kokamoto @ 2017-01-16 0:45 ` Chris McGee 2017-01-16 2:15 ` kokamoto 0 siblings, 1 reply; 9+ messages in thread From: Chris McGee @ 2017-01-16 0:45 UTC (permalink / raw) To: 9front [-- Attachment #1: Type: text/plain, Size: 1753 bytes --] Yes, there's something wrong with the USB driver. I'm looking into it but if someone can spot the problem please let me know. https://github.com/sirnewton01/rpi-9front/tree/master/bcm It doesn't seem to be be present with the older single core pis. The problem presents itself as a HID message indicating extra key presses that get sent to kbdfs. It seems that the packet gets corrupted somehow. Thanks, Chris > On Jan 15, 2017, at 7:38 PM, kokamoto@hera.eonet.ne.jp wrote: > > The mouse input also freezes some time. > When I playes with games/mahjonng, it occures. > It may be recovered when I wait some time, and tries it onece again. > Probabley usb driver has something problem? > > Kenji > >> Thanks for trying it out. I'm not sure about the Japanese keyboard, but that key input chattering problem is the one I'm currently hunting. >> >> If anyone can spot the flaw in the usbdwc.c, trap.c or clock.c it would be a great help. Meanwhile, I'll keep looking at it myself, if slowly. >> >> Chris >> >> On Jan 15, 2017, at 7:01 PM, kokamoto@hera.eonet.ne.jp wrote: >> >>>> I'm still working out some USB kinks. Have you had any keyboard problems? Did you compile/run with 9front >>> >>> Thank you verry much, Chris. >>> >>> Yes, I'm using the 9pif2 kernel for terminal (now using it) >>> with root from tcp. I'm glad to see 4 cores here! >>> >>> Yes, I have a problem to use Japanese USB keyboard. >>> I can use it for typing '_' '|' by patching by myself >>> (it may not be needed for another country). >>> >>> I have one problem to use it, that is seeing chattering of keyinput, >>> such that >>> secstore: WHC >>> where I did not type anything before that prompt. >>> >>> Kenji >>> > [-- Attachment #2: Type: text/html, Size: 4254 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [9front] Re: [9fans] New 9front image for raspberry pi 2017-01-16 0:45 ` Chris McGee @ 2017-01-16 2:15 ` kokamoto 0 siblings, 0 replies; 9+ messages in thread From: kokamoto @ 2017-01-16 2:15 UTC (permalink / raw) To: 9front > Yes, there's something wrong with the USB driver. I'm looking into it but if someone can spot the problem please let me know. On mouse problem in more precise words, mouse doesn't freeze, only stop to accept mouse button action for a while sometime. Kenji ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-01-16 2:15 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-01-09 3:17 [9fans] New 9front image for raspberry pi kokamoto 2017-01-15 6:16 ` [9front] " kokamoto 2017-01-15 13:13 ` Chris McGee 2017-01-15 17:54 ` Steve Simon 2017-01-16 0:01 ` kokamoto 2017-01-16 0:11 ` Chris McGee 2017-01-16 0:38 ` kokamoto 2017-01-16 0:45 ` Chris McGee 2017-01-16 2:15 ` kokamoto
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).