* [9fans] Parallels 5
@ 2011-05-06 5:46 Daniel Lyons
2011-05-06 7:36 ` Anthony Sorace
0 siblings, 1 reply; 13+ messages in thread
From: Daniel Lyons @ 2011-05-06 5:46 UTC (permalink / raw)
To: 9fans
I have a rather old VM that I made under Parallels 3 that seems to work under Parallels 5. I think I installed that one in late 2009 or early 2010. As an experiment, I tried installing the current release under Parallels 5. It installs, and pretty quickly (<5 min), but there are two small issues:
1. ps2intellimouse: scrolling works if you're scrolling down, but if you make the scroll up gesture, the mouse skitters off to the right and really doesn't scroll back up. Anyone seen this or have a tricky solution?
2. Ethernet card is not detected. I am not 100% sure there's nothing different in the configuration, but I've made the plan9.ini look the same in both VMs and still it fails to detect the NE2000 emulated ethernet card. There are also ominous messages about usbd: no hub during bootup that don't happen under the old one.
Is there a boot log somewhere I can examine for messages I may not have seen, or any other debugging information I can go looking for?
I'm downloading 9atom to compare tomorrow.
Thanks,
--
Daniel Lyons
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2011-05-06 5:46 [9fans] Parallels 5 Daniel Lyons
@ 2011-05-06 7:36 ` Anthony Sorace
2011-05-06 13:36 ` Daniel Lyons
2011-05-07 4:46 ` [9fans] Parallels 6 Daniel Lyons
0 siblings, 2 replies; 13+ messages in thread
From: Anthony Sorace @ 2011-05-06 7:36 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 1315 bytes --]
I have a VM that I created under Parallels 5 and am currently running under 6. It's several months old.
> 1. ps2intellimouse: scrolling works if you're scrolling down, but if you make the scroll up gesture, the mouse skitters off to the right and really doesn't scroll back up. Anyone seen this or have a tricky solution?
I saw this for the first time today. In my case, scrolling up *also* creates occasional b2 presses. Weird. I haven't used the GUI on Parallels much for two years, so I can't help with when it was introduced.
> 2. Ethernet card is not detected. I am not 100% sure there's nothing different in the configuration, but I've made the plan9.ini look the same in both VMs and still it fails to detect the NE2000 emulated ethernet card. There are also ominous messages about usbd: no hub during bootup that don't happen under the old one.
Ethernet works here (and did under Parallels 5, as well), and I've got nothing in plan9.ini to trick it. You don't see the device at all (not just no data or whatnot)?
> Is there a boot log somewhere I can examine for messages I may not have seen, or any other debugging information I can go looking for?
/dev/kmesg will give you the console prints so far; /dev/kprint will wait for new ones (and prevent them going to your actual console).
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 210 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2011-05-06 7:36 ` Anthony Sorace
@ 2011-05-06 13:36 ` Daniel Lyons
2011-05-07 4:46 ` [9fans] Parallels 6 Daniel Lyons
1 sibling, 0 replies; 13+ messages in thread
From: Daniel Lyons @ 2011-05-06 13:36 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
On May 6, 2011, at 1:36 AM, Anthony Sorace wrote:
> I have a VM that I created under Parallels 5 and am currently running under 6. It's several months old.
I seem to have gotten my version numbers mixed up. It's Parallels 6 over here as well.
>> 1. ps2intellimouse: scrolling works if you're scrolling down, but if you make the scroll up gesture, the mouse skitters off to the right and really doesn't scroll back up. Anyone seen this or have a tricky solution?
>
> I saw this for the first time today. In my case, scrolling up *also* creates occasional b2 presses. Weird. I haven't used the GUI on Parallels much for two years, so I can't help with when it was introduced.
>
>> 2. Ethernet card is not detected. I am not 100% sure there's nothing different in the configuration, but I've made the plan9.ini look the same in both VMs and still it fails to detect the NE2000 emulated ethernet card. There are also ominous messages about usbd: no hub during bootup that don't happen under the old one.
>
> Ethernet works here (and did under Parallels 5, as well), and I've got nothing in plan9.ini to trick it. You don't see the device at all (not just no data or whatnot)?
There's no /net/ether0, so I can't run ip/ipconfig to get any further.
>> Is there a boot log somewhere I can examine for messages I may not have seen, or any other debugging information I can go looking for?
>
> /dev/kmesg will give you the console prints so far; /dev/kprint will wait for new ones (and prevent them going to your actual console).
I don't see anything interesting there, except that it couldn't initialize usbd. Does usbd work for you?
—
Daniel Lyons
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 6
2011-05-06 7:36 ` Anthony Sorace
2011-05-06 13:36 ` Daniel Lyons
@ 2011-05-07 4:46 ` Daniel Lyons
1 sibling, 0 replies; 13+ messages in thread
From: Daniel Lyons @ 2011-05-07 4:46 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
On May 6, 2011, at 1:36 AM, Anthony Sorace wrote:
>> 2. Ethernet card is not detected. I am not 100% sure there's nothing different in the configuration, but I've made the plan9.ini look the same in both VMs and still it fails to detect the NE2000 emulated ethernet card. There are also ominous messages about usbd: no hub during bootup that don't happen under the old one.
>
> Ethernet works here (and did under Parallels 5, as well), and I've got nothing in plan9.ini to trick it. You don't see the device at all (not just no data or whatnot)?
No device at all. In frustration, I added the following to my plan9.ini:
*noetherprobe=1
ether0=ne2000
This had no effect either. I didn't have to do anything interesting for the old image either, I don't think.
>> Is there a boot log somewhere I can examine for messages I may not have seen, or any other debugging information I can go looking for?
>
> /dev/kmesg will give you the console prints so far; /dev/kprint will wait for new ones (and prevent them going to your actual console).
OK, so after so many bytes free, I get this:
cpu0: 2671MHz GenuineIntel Core i5 (cpuid: AX 0x20655 DX 0x1F8BFBFF)
ELCR: 0E80
256M memory: 105M kernel data, 151M user, 574M swap
usbinit...usbd..../boot/usbd: /dev/usb: no hubs
no usbd...no usb disk...auth...usbinit...usbd.../boot/usbd: /dev/usb: no hubs
no usbd...no usb disk...mount usbd...boot: can't open /srv/usb: '/srv/usb' file does not exist
time...
fossil(#S/sdC0/fossil)...version...time...
can't stat /srv/parts.sdXX: '/srv/partfs.sdXX' file does not exist
init: starting /bin/rc
And that's it, nothing particularly interesting. What else can I do to debug this?
Thanks,
—
Daniel Lyons
^ permalink raw reply [flat|nested] 13+ messages in thread
* [9fans] Recommended emulators/VMs for P9 install
@ 2010-04-15 17:11 Joel C. Salomon
2010-04-15 18:56 ` Federico G. Benavento
0 siblings, 1 reply; 13+ messages in thread
From: Joel C. Salomon @ 2010-04-15 17:11 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
My computer died, so I'm in the market for a new one. I figure I'd
like to get back into hacking on Plan 9 so I plan to install it
beneath a VM in whatever machine I buy. I'm even considering Windows
7 Pro with Virtual PC, but I think I'd prefer Xen or one of the
Linux-based things (VirtualBox, etc.).
Ease of installation is important, as is the ability to run a somewhat
normal (Windows or Linux) host OS. Are there any recommendations?
—Joel
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Recommended emulators/VMs for P9 install
2010-04-15 17:11 [9fans] Recommended emulators/VMs for P9 install Joel C. Salomon
@ 2010-04-15 18:56 ` Federico G. Benavento
2010-04-16 6:19 ` Rodolfo (kix)
0 siblings, 1 reply; 13+ messages in thread
From: Federico G. Benavento @ 2010-04-15 18:56 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
vmware, the rest just suck, qemu and virtual box being
the slowest
On Thu, Apr 15, 2010 at 2:11 PM, Joel C. Salomon <joelcsalomon@gmail.com> wrote:
> My computer died, so I'm in the market for a new one. I figure I'd
> like to get back into hacking on Plan 9 so I plan to install it
> beneath a VM in whatever machine I buy. I'm even considering Windows
> 7 Pro with Virtual PC, but I think I'd prefer Xen or one of the
> Linux-based things (VirtualBox, etc.).
>
> Ease of installation is important, as is the ability to run a somewhat
> normal (Windows or Linux) host OS. Are there any recommendations?
>
> —Joel
>
>
--
Federico G. Benavento
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Recommended emulators/VMs for P9 install
2010-04-15 18:56 ` Federico G. Benavento
@ 2010-04-16 6:19 ` Rodolfo (kix)
2010-04-16 19:00 ` James Chapman
0 siblings, 1 reply; 13+ messages in thread
From: Rodolfo (kix) @ 2010-04-16 6:19 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
[-- Attachment #1: Type: text/plain, Size: 380 bytes --]
I am agreed with Federico,
vmware. Do not spend time with other emulators.
El 15 de abr de 2010, 9:02 p.m., "Federico G. Benavento" <
benavento@gmail.com> escribió:
vmware, the rest just suck, qemu and virtual box being
the slowest
On Thu, Apr 15, 2010 at 2:11 PM, Joel C. Salomon <joelcsalomon@gmail.com>
wrote: > My computer died...
--
Federico G. Benavento
[-- Attachment #2: Type: text/html, Size: 687 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Recommended emulators/VMs for P9 install
2010-04-16 6:19 ` Rodolfo (kix)
@ 2010-04-16 19:00 ` James Chapman
2010-04-16 19:51 ` [9fans] Parallels 5 Lyndon Nerenberg
0 siblings, 1 reply; 13+ messages in thread
From: James Chapman @ 2010-04-16 19:00 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
This afternoon I downloaded a trial version of VM Fusion (Version
3.0.2 (232708)) and a fresh plan9.iso.bz2 and installed it on my core
2 due macbook running OS X Leopard (Version 10.5.8).
It works quite nicely, graphics and networking are both working. The
only things that tripped me up were I had to delete the IDE emulating
hard disk image and create a SCSI emulating before installation and
choose xga instead of the usual vesa for the screen.
I have had parallels working on several occasions in the past but a
recent attempt to get it working again failed. I couldn't even get it
to boot the installer.
James
On Fri, Apr 16, 2010 at 9:19 AM, Rodolfo (kix) <kix@kix.es> wrote:
> I am agreed with Federico,
>
> vmware. Do not spend time with other emulators.
>
> El 15 de abr de 2010, 9:02 p.m., "Federico G. Benavento"
> <benavento@gmail.com> escribió:
>
> vmware, the rest just suck, qemu and virtual box being
> the slowest
>
> On Thu, Apr 15, 2010 at 2:11 PM, Joel C. Salomon <joelcsalomon@gmail.com>
> wrote: > My computer died...
>
> --
> Federico G. Benavento
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [9fans] Parallels 5
2010-04-16 19:00 ` James Chapman
@ 2010-04-16 19:51 ` Lyndon Nerenberg
2010-04-16 19:56 ` Lyndon Nerenberg
2010-04-16 20:25 ` erik quanstrom
0 siblings, 2 replies; 13+ messages in thread
From: Lyndon Nerenberg @ 2010-04-16 19:51 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> I have had parallels working on several occasions in the past but a
> recent attempt to get it working again failed. I couldn't even get it
> to boot the installer.
I just did a Parallels 5 on Snow Leopard a few days ago. To get anywhere
you have to use a 9atom ISO. I have a terminal instance installed but
haven't had time to do any serious banging on it. I have noticed that
twice now 9pcf has panicked while the VM instance was sitting idle. I
don't remember the panic message, but I should be able to reproduce it
easily enough.
--lyndon
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2010-04-16 19:51 ` [9fans] Parallels 5 Lyndon Nerenberg
@ 2010-04-16 19:56 ` Lyndon Nerenberg
2010-04-16 20:25 ` erik quanstrom
2010-04-16 20:25 ` erik quanstrom
1 sibling, 1 reply; 13+ messages in thread
From: Lyndon Nerenberg @ 2010-04-16 19:56 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
Also, "echo -n 'accelerated 0' > /dev/mousectl" is required to get the
mouse under control.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2010-04-16 19:56 ` Lyndon Nerenberg
@ 2010-04-16 20:25 ` erik quanstrom
0 siblings, 0 replies; 13+ messages in thread
From: erik quanstrom @ 2010-04-16 20:25 UTC (permalink / raw)
To: 9fans
On Fri Apr 16 15:57:33 EDT 2010, lyndon@orthanc.ca wrote:
> Also, "echo -n 'accelerated 0' > /dev/mousectl" is required to get the
> mouse under control.
>
i've turned off mouse accelleration completely in 9atom. i do
the multplication in the kernel, rather than relying on the
mouse to do it correctly. i've found that kvms tend to screw
this part of the protocol up. and really, why go to the trouble
of programming a mouse to do a multiplication?
- erik
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2010-04-16 19:51 ` [9fans] Parallels 5 Lyndon Nerenberg
2010-04-16 19:56 ` Lyndon Nerenberg
@ 2010-04-16 20:25 ` erik quanstrom
2010-04-16 20:50 ` Lyndon Nerenberg
1 sibling, 1 reply; 13+ messages in thread
From: erik quanstrom @ 2010-04-16 20:25 UTC (permalink / raw)
To: 9fans
> I just did a Parallels 5 on Snow Leopard a few days ago. To get anywhere
> you have to use a 9atom ISO. I have a terminal instance installed but
> haven't had time to do any serious banging on it. I have noticed that
> twice now 9pcf has panicked while the VM instance was sitting idle. I
> don't remember the panic message, but I should be able to reproduce it
> easily enough.
please send the panic message. would like to fix.
- erik
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2010-04-16 20:25 ` erik quanstrom
@ 2010-04-16 20:50 ` Lyndon Nerenberg
2010-04-16 21:04 ` erik quanstrom
2010-04-16 23:35 ` erik quanstrom
0 siblings, 2 replies; 13+ messages in thread
From: Lyndon Nerenberg @ 2010-04-16 20:50 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
> please send the panic message. would like to fix.
panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
dumpstack disabled
cpu0: exiting
(the panic line does print twice)
--lyndon
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2010-04-16 20:50 ` Lyndon Nerenberg
@ 2010-04-16 21:04 ` erik quanstrom
2010-04-16 22:06 ` Francisco J Ballesteros
2010-04-16 23:35 ` erik quanstrom
1 sibling, 1 reply; 13+ messages in thread
From: erik quanstrom @ 2010-04-16 21:04 UTC (permalink / raw)
To: 9fans
On Fri Apr 16 16:55:02 EDT 2010, lyndon@orthanc.ca wrote:
> > please send the panic message. would like to fix.
>
> panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
> panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
> dumpstack disabled
> cpu0: exiting
>
> (the panic line does print twice)
please turn off *nodumpstack. i'll need a full backtrace.
error is being called from an interrupt.
- erik
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2010-04-16 21:04 ` erik quanstrom
@ 2010-04-16 22:06 ` Francisco J Ballesteros
2010-04-19 15:30 ` erik quanstrom
0 siblings, 1 reply; 13+ messages in thread
From: Francisco J Ballesteros @ 2010-04-16 22:06 UTC (permalink / raw)
To: Fans of the OS Plan 9 from Bell Labs
hmm. I'm using parallels 5 on leopard (not snow) and it works just fine with the
std distribution.
On Fri, Apr 16, 2010 at 11:04 PM, erik quanstrom
<quanstro@labs.coraid.com> wrote:
> On Fri Apr 16 16:55:02 EDT 2010, lyndon@orthanc.ca wrote:
>> > please send the panic message. would like to fix.
>>
>> panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
>> panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
>> dumpstack disabled
>> cpu0: exiting
>>
>> (the panic line does print twice)
>
> please turn off *nodumpstack. i'll need a full backtrace.
> error is being called from an interrupt.
>
> - erik
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [9fans] Parallels 5
2010-04-16 20:50 ` Lyndon Nerenberg
2010-04-16 21:04 ` erik quanstrom
@ 2010-04-16 23:35 ` erik quanstrom
1 sibling, 0 replies; 13+ messages in thread
From: erik quanstrom @ 2010-04-16 23:35 UTC (permalink / raw)
To: 9fans
On Fri Apr 16 16:51:50 EDT 2010, lyndon@orthanc.ca wrote:
> > please send the panic message. would like to fix.
>
> panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
> panic: kernel fault: no user process pc=0xf01f047b addr=0x000002cc
> dumpstack disabled
> cpu0: exiting
>
> (the panic line does print twice)
looks like the vesa emulation barfs on screen blanking.
in parallels. wierd.
the distribution doesn't have vesa screen blanking and
it is called from interrupt context (mouseclock).
here's a fix for that bug
ladd; diffy -c vgavesa.c
/n/dump/2010/0416/sys/src/9/pc/vgavesa.c:167,173 - vgavesa.c:167,176
u.bx = 0x0101;
else
u.bx = 0x0001;
- vbecall(&u);
+ if(!waserror()){
+ vbecall(&u);
+ poperror();
+ }
}
- erik
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2011-05-07 4:46 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-05-06 5:46 [9fans] Parallels 5 Daniel Lyons
2011-05-06 7:36 ` Anthony Sorace
2011-05-06 13:36 ` Daniel Lyons
2011-05-07 4:46 ` [9fans] Parallels 6 Daniel Lyons
-- strict thread matches above, loose matches on Subject: below --
2010-04-15 17:11 [9fans] Recommended emulators/VMs for P9 install Joel C. Salomon
2010-04-15 18:56 ` Federico G. Benavento
2010-04-16 6:19 ` Rodolfo (kix)
2010-04-16 19:00 ` James Chapman
2010-04-16 19:51 ` [9fans] Parallels 5 Lyndon Nerenberg
2010-04-16 19:56 ` Lyndon Nerenberg
2010-04-16 20:25 ` erik quanstrom
2010-04-16 20:25 ` erik quanstrom
2010-04-16 20:50 ` Lyndon Nerenberg
2010-04-16 21:04 ` erik quanstrom
2010-04-16 22:06 ` Francisco J Ballesteros
2010-04-19 15:30 ` erik quanstrom
2010-04-16 23:35 ` erik quanstrom
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).