Re: [9fans] CDROM boot failed, how can i do?

Re: [9fans] CDROM boot failed, how can i do?

[River He]

Thank for your help.

I burn plan9.iso to a CDROM, when it prompt "boot form:"
I typed as below:
sdD0!cdboot!9pccd.gz
but it display:
unknown partition sdD0!cdboot
and return to
"boot from:"

why?

----- Original Message ----- 
From: "Jim Choate" <ravage@einstein.ssz.com>
To: "River He" <hehaiyang@msn.com>
Sent: Thursday, July 31, 2003 7:47 PM
Subject: Re: [9fans] CDROM boot failed, how can i do?


> 
> On Thu, 31 Jul 2003, River He wrote:
> 
> > (Q1)
> > My harddisk is empty and not formatted, could I boot from CDROM and install
> > it?
> 
> Yes, you will need to get a copy of the relevant files and burn them to a
> CD as well as making a boot floppy.
> 
> > (Q2)
> > Sorry, I don't know what "sdD0!cdboot!9pccd.gz" mean?
> > Does "sdD0" mean second master IDE? and sdC0? and others IDE device?
> > What "cdboot" mean here?
> 
> sdD0 is the -second controller- (ie sdD) and the first device (ie sdD0).
> Your first device. cdboot is what you're doing. 9pccd.gz is the image
> you're going to boot on that device.
> 
> > (Q3)
> > Another question: I search my cdrom, there is a file name 9pccd.gz. But I
> > found file 9pc.gz, 9pcdisk.gz and 9pccpu.gz, which should I use?
> > these file locate in directory 386. Should add directory name in boot
> > command line like "sdD0!cdboot!/386/9pccd.gz"?
> 
> Use 9pccd.gz, though I personally use a different approach.
> 
> > (Q4)
> > Where are these documents about install and hardware setting?
> 
> You can find them on the Bell Labs Plan 9 site, be advised they have
> errors and holes, as well as being very poorly organized with respect to
> what needs done first.
> 
> The Hangar 18 group is working on a new document, you can find it at;
> 
> http://einstein.ssz.com/hangar18/Plan9Intro.txt
> 
> You might also want to look over and perhaps joing the Hangar 18 main list
> (hangar18-general@open-forge.org) at,
> 
> http://open-forge.org
> 
> Good luck on your install!
> 
> 
>  --
>     ____________________________________________________________________
> 
>       We are all interested in the future for that is where you and I
>       are going to spend the rest of our lives.
> 
>                               Criswell, "Plan 9 from Outer Space"
> 
>       ravage@ssz.com                            jchoate@open-forge.org
>       www.ssz.com                               www.open-forge.org
>     --------------------------------------------------------------------
> 
> 

Re: [9fans] CDROM boot failed, how can i do?

[andrey mirtchovski]

because 9load cannot find your cdrom drive. as others suggested:

	- try switching its place -- if it's on the second ide slot move it to
	  the first, if on the first -- move it to the second
	- try it without the hard drive in
	- try a floppy disk

experiment.

the documentation is on the plan9.bell-labs.com/plan9dist web page, see
Papers, Man pages and Wiki.


On Thu, 31 Jul 2003, River He wrote:

> Thank for your help.
>
> I burn plan9.iso to a CDROM, when it prompt "boot form:"
> I typed as below:
> sdD0!cdboot!9pccd.gz
> but it display:
> unknown partition sdD0!cdboot
> and return to
> "boot from:"
>
> why?
>

[9fans] Re: CDROM boot failed, how can i do?

[Jim Choate]

On Thu, 31 Jul 2003, andrey mirtchovski wrote:

> because 9load cannot find your cdrom drive. as others suggested:
>
> 	- try switching its place -- if it's on the second ide slot move it to
> 	  the first, if on the first -- move it to the second
> 	- try it without the hard drive in
> 	- try a floppy disk
>
> experiment.

I agree with the "experiment" part, my suggestion would be a lot more
organized with your approach than others would suggest. I'd say -never-
put your CD drive as a slave on a EIDE (or IDE for that matter), unless
you're sure you'll -never- want to boot from it. I'd suggest strongly that
if you put your CD on master and your HD on the slave and it still doesn't
see the CD drive then get another CD drive. There are some problems with
some drives (I've got a pile of about four drives that don't work). I just
replaced the drive in saucer.ssz.com with a DVD/CD burner and it worked like
a champ (the 40G drive helped a lot too).

> the documentation is on the plan9.bell-labs.com/plan9dist web page, see
> Papers, Man pages and Wiki.

As an aside, Rob and I have been working on a new install doc that makes a
lot more sense than the stuff on the Bell Labs site, too much work
scattered out over too many documents.

http://einstein.ssz.com/hangar18/Plan9Intro.txt

This doc is -not- finished so don't expect it to solve all your problems,
yet ;) However, you can expect to see new sections added at least weekly
as Rob and I get windows of op to move forward.


 --
    ____________________________________________________________________

      We are all interested in the future for that is where you and I
      are going to spend the rest of our lives.

                              Criswell, "Plan 9 from Outer Space"

      ravage@ssz.com                            jchoate@open-forge.org
      www.ssz.com                               www.open-forge.org
    --------------------------------------------------------------------

Re: [9fans] Re: CDROM boot failed, how can i do?

[Douglas A. Gwyn]

Jim Choate wrote:
> ... I'd say -never-
> put your CD drive as a slave on a EIDE (or IDE for that matter), unless
> you're sure you'll -never- want to boot from it.

There shouldn't be any problem booting from any IDE position.
There can be a significant loss of throughput if the faster
of the two devices on a slot is not the master.

I must say that the whole "PC" disk/boot/partition
situation is one of the ugliest messes I've seen in
my 40 years of computing.  *The* major contributor to
this is the rush to market with "any old solution" no
matter how short-sighted, leading to kludge upon
kludge as newer developments outgrow the older,
unnecessary, limitations of the interface designs.

[9fans] Re: CDROM boot failed, how can i do?

[Jim Choate]

On Fri, 1 Aug 2003, Douglas A. Gwyn wrote:

> Jim Choate wrote:
> > ... I'd say -never-
> > put your CD drive as a slave on a EIDE (or IDE for that matter), unless
> > you're sure you'll -never- want to boot from it.
>
> There shouldn't be any problem booting from any IDE position.

However, the fact is there -is-. I've seen this on Windows, Linux, Plan 9,
Unununium, etc. So have many others over many years, it is not a new
problem by any means.

If you want to minimize the hassles with CD's then always put them in as
the master.


 --
    ____________________________________________________________________

      We are all interested in the future for that is where you and I
      are going to spend the rest of our lives.

                              Criswell, "Plan 9 from Outer Space"

      ravage@ssz.com                            jchoate@open-forge.org
      www.ssz.com                               www.open-forge.org
    --------------------------------------------------------------------

[9fans] CDROM boot failed, how can i do?

[River He]

I download plan9.iso.gz, upzip it, and burn it to CDROM.
I try to boot from CDROM, but monitor display as below:

Boot form CD:
1. FD 2.88MB System Type-(0F)
PBS...Plan 9 from Bell Labs
ELCR: 0A60
apm ax=f000 cx=f000 dx=fdf9 di=0 ebx=694c esi=f03e4
dev A0 port 1F0  config 045A capabilities 2F00 mwdma 0007 udma 203F
pcirouting: South birdge 8086, 24C0 not found
Boot devices: fd0 sdC0!dos
boot from:

Re: [9fans] CDROM boot failed, how can i do?

[Andrey S. Kukhar]

Failed? No, you just prompted to select boot 
device. You should type something like this
	sdD0!cdboot!9pccd.gz
where sdD0 is your CD drive.
Then in the ``root is from'' prompt type
	local!#S/sdD0/data

kyxap

> I download plan9.iso.gz, upzip it, and burn it to CDROM.
> I try to boot from CDROM, but monitor display as below:
>
> Boot form CD:
> 1. FD 2.88MB System Type-(0F)
> PBS...Plan 9 from Bell Labs
> ELCR: 0A60
> apm ax=f000 cx=f000 dx=fdf9 di=0 ebx=694c esi=f03e4
> dev A0 port 1F0  config 045A capabilities 2F00 mwdma 0007
> udma 203F pcirouting: South birdge 8086, 24C0 not found
> Boot devices: fd0 sdC0!dos
> boot from:

Re: [9fans] CDROM boot failed, how can i do?

[Jack Johnson]

Andrey S. Kukhar wrote:
> Failed? No, you just prompted to select boot
> device. You should type something like this
> 	sdD0!cdboot!9pccd.gz
> where sdD0 is your CD drive.
> Then in the ``root is from'' prompt type
> 	local!#S/sdD0/data

If memory serves, this seems to be more prevalent if your CD-ROM is not
in the expected location (i.e. /dev/sdC1 vs. /dev/sdD0 or vice versa).
Entering the path manually always works, but if you happen to have
things plugged in in the "right" location, it all goes pretty smoothly.

I *think* it must expect /dev/sdC1 (primary slave), because I always
have my burner on /dev/sdD0 (secondary master -- alternate IDE
controller often provides better performance) and I think that's why I
always get bit by the boot prompt.

I had a demo(lition) box set up for a while where I just moved the
CD-ROM to keep things simple for testing, which is where I *think* I
noticed the defaults.

Could it be advantageous to change the boot menu to allow selection of
the CD-ROM location, to make it easier for newbies to
investigate/test/install?

-Jack

Re: [9fans] CDROM boot failed, how can i do?

[Fco.J.Ballesteros]

> Could it be advantageous to change the boot menu to allow selection of
> the CD-ROM location, to make it easier for newbies to
> investigate/test/install?

I'd prefer to get the same name for your cd everywhere, like a /dev/cd
for the first cd unit found. I do that by hand by binding under /n.
The price for not doing so is to have some programs look at /dev/sdC1
by default and others look at /dev/sdD1 (both things are wrong, depending
on the pc you're using).

Disks don't use to have that problem, since most boxes have them attached
at sdC0, but cd units...

Re: [9fans] CDROM boot failed, how can i do?

[boyd, rounin]

    From: <9fans-admin@cse.psu.edu>

err, who is 9fans-admin?

Re: [9fans] CDROM boot failed, how can i do?

[Douglas A. Gwyn]

"Fco.J.Ballesteros" wrote:
> Disks don't use to have that problem, since most boxes
> have them attached at sdC0, ...

Except that might not be the disk containing the desired
Plan 9 partition.

Re: [9fans] CDROM boot failed, how can i do?

[River He]

(Q1)
My harddisk is empty and not formatted, could I boot from CDROM and install it?

(Q2) 
Sorry, I don't know what "sdD0!cdboot!9pccd.gz" mean?
Does "sdD0" mean second master IDE? and sdC0? and others IDE device?
What "cdboot" mean here?

(Q3)
Another question: I search my cdrom, there is a file name 9pccd.gz. But I found file 9pc.gz, 9pcdisk.gz and 9pccpu.gz, which should I use?
these file locate in directory 386. Should add directory name in boot command line like "sdD0!cdboot!/386/9pccd.gz"?

(Q4)
Where are these documents about install and hardware setting?

Thank you!


----- Original Message ----- 
From: "Andrey S. Kukhar" <plan9@kp.km.ua>
To: <9fans@cse.psu.edu>
Sent: Thursday, July 31, 2003 9:49 AM
Subject: Re: [9fans] CDROM boot failed, how can i do?


> Failed? No, you just prompted to select boot 
> device. You should type something like this
> sdD0!cdboot!9pccd.gz
> where sdD0 is your CD drive.
> Then in the ``root is from'' prompt type
> local!#S/sdD0/data
> 
> kyxap
> 
> > I download plan9.iso.gz, upzip it, and burn it to CDROM.
> > I try to boot from CDROM, but monitor display as below:
> >
> > Boot form CD:
> > 1. FD 2.88MB System Type-(0F)
> > PBS...Plan 9 from Bell Labs
> > ELCR: 0A60
> > apm ax=f000 cx=f000 dx=fdf9 di=0 ebx=694c esi=f03e4
> > dev A0 port 1F0  config 045A capabilities 2F00 mwdma 0007
> > udma 203F pcirouting: South birdge 8086, 24C0 not found
> > Boot devices: fd0 sdC0!dos
> > boot from: