From: jnc@mercury.lcs.mit.edu (Noel Chiappa)
Subject: [TUHS] /dev/drum
Date: Mon, 23 Apr 2018 18:01:11 -0400 (EDT) [thread overview]
Message-ID: <20180423220111.1F99A18C07E@mercury.lcs.mit.edu> (raw)
> From: Clem Cole
> To be honest, I really don't remember - but I know we used letters for
> the different partitions on the 11/70 before BSD showed up.
In V6 (and probably before that, too), it was numbers:
http://minnie.tuhs.org/cgi-bin/utree.pl?file=V6/usr/man/man4/rp.4
So on my machine which had 2 x 50MB CalChomps, with a Diva controller, which
we had to split up into two partition each (below), they were dv00, dv01, dv10
and dv11. Letters for the partitions made it easier...
> The reason for the partition originally was (and it must have been 6th
> edition when I first saw it), DEC finally made a disk large enough that
> number of blocks overflowed a 16 bit integer. So splitting the disk
> into smaller partitions allowed the original seek(2) to work without
> overflow.
No, in V6 filesystems, block numbers (in inodes, etc - also the file system
size in the superblock) were only 16 bits, so a 50MB disk (100K blocks) had to
be split up into partitions to use it all. True of the RP03/04 in V6 too (see
the man page above).
Noel
next reply other threads:[~2018-04-23 22:01 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-23 22:01 Noel Chiappa [this message]
2018-04-23 22:09 ` Warner Losh
[not found] <mailman.1.1525744802.16322.tuhs@minnie.tuhs.org>
2018-05-08 22:39 ` Johnny Billquist
-- strict thread matches above, loose matches on Subject: below --
2018-05-07 15:36 Noel Chiappa
2018-05-06 13:07 Noel Chiappa
2018-05-06 15:57 ` Johnny Billquist
2018-05-05 13:06 Noel Chiappa
2018-05-05 20:53 ` Johnny Billquist
2018-05-03 11:39 Noel Chiappa
2018-05-03 21:22 ` Johnny Billquist
2018-04-30 15:05 Noel Chiappa
2018-04-30 16:43 ` Paul Winalski
2018-04-30 21:41 ` Johnny Billquist
2018-05-03 2:54 ` Charles Anthony
2018-04-28 20:40 Noel Chiappa
2018-04-29 15:37 ` Johnny Billquist
2018-04-29 16:34 ` Steve Nickolas
2018-04-29 16:48 ` Warner Losh
2018-04-28 0:19 Noel Chiappa
2018-04-28 10:41 ` Johnny Billquist
2018-04-28 12:19 ` Rico Pajarola
2018-04-27 23:01 Noel Chiappa
2018-04-27 23:10 ` Johnny Billquist
2018-04-27 23:39 ` Warner Losh
[not found] <mailman.1.1524708001.6296.tuhs@minnie.tuhs.org>
2018-04-27 22:41 ` Johnny Billquist
2018-04-26 1:53 Noel Chiappa
[not found] <mailman.143.1524696952.3788.tuhs@minnie.tuhs.org>
2018-04-25 23:08 ` Johnny Billquist
2018-04-25 22:55 Noel Chiappa
[not found] <mailman.139.1524690859.3788.tuhs@minnie.tuhs.org>
2018-04-25 22:54 ` Johnny Billquist
2018-04-25 22:46 Noel Chiappa
[not found] <mailman.137.1524667148.3788.tuhs@minnie.tuhs.org>
2018-04-25 21:43 ` Johnny Billquist
2018-04-25 22:24 ` Johnny Billquist
2018-04-26 5:51 ` Tom Ivar Helbekkmo
2018-04-25 22:37 ` Johnny Billquist
2018-04-24 7:10 Rudi Blom
[not found] <mailman.125.1524526228.3788.tuhs@minnie.tuhs.org>
2018-04-23 23:44 ` Johnny Billquist
2018-04-23 23:57 ` Steve Nickolas
2018-04-24 0:24 ` Ronald Natalie
2018-04-24 0:25 ` Warren Toomey
2018-04-24 0:31 ` Dave Horsfall
2018-04-24 1:02 ` Lyndon Nerenberg
2018-04-24 4:32 ` Grant Taylor
2018-04-24 4:49 ` Bakul Shah
2018-04-24 4:59 ` Warner Losh
2018-04-24 6:22 ` Bakul Shah
2018-04-24 14:57 ` Warner Losh
2018-04-24 6:46 ` Lars Brinkhoff
2018-04-23 18:41 Noel Chiappa
2018-04-23 19:09 ` Clem Cole
2018-04-23 23:01 ` Dave Horsfall
2018-04-23 23:49 ` Dave Horsfall
2018-04-24 0:26 ` Ronald Natalie
2018-04-22 18:06 Norman Wilson
2018-04-20 16:45 Noel Chiappa
2018-04-20 16:53 ` Charles Anthony
2018-04-20 17:16 ` William Pechter
2018-04-20 23:35 ` Dave Horsfall
2018-04-22 11:48 ` Steve Simon
2018-04-20 15:02 Tim Bradshaw
2018-04-20 15:58 ` Clem Cole
2018-04-20 16:00 ` David Collantes
2018-04-20 16:12 ` Dan Cross
2018-04-20 16:21 ` Clem Cole
2018-04-20 16:33 ` Warner Losh
2018-04-20 19:17 ` Ron Natalie
2018-04-20 20:23 ` Clem Cole
2018-04-20 22:10 ` Dave Horsfall
2018-04-22 17:01 ` Lars Brinkhoff
2018-04-22 17:37 ` Clem Cole
2018-04-22 19:14 ` Bakul Shah
2018-04-22 20:58 ` Mutiny
2018-04-22 22:37 ` Clem cole
2018-04-22 21:51 ` Dave Horsfall
2018-04-25 1:27 ` Dan Stromberg
2018-04-25 12:18 ` Ronald Natalie
2018-04-25 13:39 ` Tim Bradshaw
2018-04-25 14:02 ` arnold
2018-04-25 14:59 ` tfb
2018-04-25 14:33 ` Ian Zimmerman
2018-04-25 14:46 ` Larry McVoy
2018-04-25 15:03 ` ron minnich
2018-04-25 20:29 ` Paul Winalski
2018-04-25 20:45 ` Larry McVoy
2018-04-25 21:14 ` Lawrence Stewart
2018-04-25 21:30 ` ron minnich
2018-04-25 23:01 ` Bakul Shah
2018-04-23 16:42 ` Tim Bradshaw
2018-04-23 17:30 ` Ron Natalie
2018-04-23 17:51 ` Clem Cole
2018-04-23 18:30 ` Ron Natalie
2018-04-25 14:02 ` Tom Ivar Helbekkmo
2018-04-25 14:38 ` Clem Cole
2018-04-23 20:47 ` Grant Taylor
2018-04-23 21:06 ` Clem Cole
2018-04-23 21:14 ` Dan Mick
2018-04-23 21:27 ` Clem Cole
2018-04-23 22:07 ` Tim Bradshaw
2018-04-23 22:15 ` Warner Losh
2018-04-23 23:30 ` Grant Taylor
2018-04-24 9:37 ` Michael Kjörling
2018-04-24 9:57 ` Dave Horsfall
2018-04-24 13:01 ` Nemo
2018-04-24 13:03 ` Arthur Krewat
2018-04-23 23:45 ` Arthur Krewat
2018-04-24 8:05 ` tfb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180423220111.1F99A18C07E@mercury.lcs.mit.edu \
--to=jnc@mercury.lcs.mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).