* [9fans] Welcome Plan 9 community @ 2014-03-02 22:16 Szymon Olewniczak 2014-03-03 1:05 ` erik quanstrom ` (2 more replies) 0 siblings, 3 replies; 19+ messages in thread From: Szymon Olewniczak @ 2014-03-02 22:16 UTC (permalink / raw) To: 9fans Hi, I've just registerd to this mailing list, so hello everyone. I've read about Plan 9 several months ago and fascinated with ideas behind this OS. Now I've decided to try the system on my own and although I don't know much about it yet, I believe that it can be something that I would like to work for(I'm an IT student, so if I find myself clever enough to understand the power of Plan 9, I will try to help the project during the GOSC). But to begin with the main issue that brings me to write this message. I know that before I can do anything on Plan 9, I need hardware that cooperate with it. I've read the Supported PC Hardware[0] and realised that there is not much of it. Is there only one reliable motherboard (ASUS A8R32-MVP without NIC) that can run Plan9? I've also read there that there are several laptops pointed in this page without any additional comments in brackets. Does it mean that they are fully supported? I've also read that RaspberryPI can run Plan 9. I have RP rev. 2 so maybe it should be the hardware which I can use to start my Plan 9 adventure. What hardware can you recommend? What hardware do you use? Is there is any PC that can run both Plan 9 and Inferno? [0]http://www.plan9.bell-labs.com/wiki/plan9/Supported_PC_hardware/index.html ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-02 22:16 [9fans] Welcome Plan 9 community Szymon Olewniczak @ 2014-03-03 1:05 ` erik quanstrom 2014-03-03 5:54 ` Grant Mather 2014-03-03 18:05 ` Peter Hull 2 siblings, 0 replies; 19+ messages in thread From: erik quanstrom @ 2014-03-03 1:05 UTC (permalink / raw) To: 9fans > But to begin with the main issue that brings me to write this message. I > know that before I can do anything on Plan 9, I need hardware that > cooperate with it. I've read the Supported PC Hardware[0] and > realised that there is not much of it. Is there only one reliable motherboard > (ASUS A8R32-MVP without NIC) that can run Plan9? I've also read there that > there are several laptops pointed in this page without any additional > comments in brackets. Does it mean that they are fully supported? I've > also read that RaspberryPI can run Plan 9. I have RP rev. 2 so maybe it > should be the hardware which I can use to start my Plan 9 adventure. i've had good luck with plan 9 on a wide variety of hardware. i've probablly run it on 20-30 motherboards in the last 5-6 years. everything from little soekris to dell/ibm/hp blade servers. but there are a few little changes that i made, esp. to the 82563 (intel gigabit) and ahci drivers. - erik ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-02 22:16 [9fans] Welcome Plan 9 community Szymon Olewniczak 2014-03-03 1:05 ` erik quanstrom @ 2014-03-03 5:54 ` Grant Mather 2014-03-03 18:05 ` Peter Hull 2 siblings, 0 replies; 19+ messages in thread From: Grant Mather @ 2014-03-03 5:54 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs > I've also read that RaspberryPI can run Plan 9. I have RP rev. 2 so maybe it > should be the hardware which I can use to start my Plan 9 adventure. > > What hardware can you recommend? What hardware do you use? Is there is > any PC that can run both Plan 9 and Inferno? If you have a Raspberry Pi, I would just recommend running it on that. This is currently the machine that I run Plan 9 on, and it runs fast and very stable. Installing is simply a matter of using dd to copy it to a SD card. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-02 22:16 [9fans] Welcome Plan 9 community Szymon Olewniczak 2014-03-03 1:05 ` erik quanstrom 2014-03-03 5:54 ` Grant Mather @ 2014-03-03 18:05 ` Peter Hull 2014-03-03 19:32 ` Lyndon Nerenberg 2 siblings, 1 reply; 19+ messages in thread From: Peter Hull @ 2014-03-03 18:05 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs It’s not as exciting as real hardware but you could always run it on a virtual machine. I’ve got it running fine on VirtualBox, with networking (internet and between VMs) Pete On 2 Mar 2014, at 22:16, Szymon Olewniczak <szymon.olewniczak@rid.pl> wrote: > Hi, > I've just registerd to this mailing list, so hello everyone. > > I've read about Plan 9 several months ago and fascinated with ideas > behind this OS. Now I've decided to try the system on my own and although > I don't know much about it yet, I believe that it can be something that > I would like to work for(I'm an IT student, so if I find myself clever > enough to understand the power of Plan 9, I will try to help the project > during the GOSC). > > But to begin with the main issue that brings me to write this message. I > know that before I can do anything on Plan 9, I need hardware that > cooperate with it. I've read the Supported PC Hardware[0] and > realised that there is not much of it. Is there only one reliable motherboard > (ASUS A8R32-MVP without NIC) that can run Plan9? I've also read there that > there are several laptops pointed in this page without any additional > comments in brackets. Does it mean that they are fully supported? I've > also read that RaspberryPI can run Plan 9. I have RP rev. 2 so maybe it > should be the hardware which I can use to start my Plan 9 adventure. > > What hardware can you recommend? What hardware do you use? Is there is > any PC that can run both Plan 9 and Inferno? > > [0]http://www.plan9.bell-labs.com/wiki/plan9/Supported_PC_hardware/index.html > > ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 18:05 ` Peter Hull @ 2014-03-03 19:32 ` Lyndon Nerenberg 2014-03-03 20:28 ` Alexandru Gheorghe 0 siblings, 1 reply; 19+ messages in thread From: Lyndon Nerenberg @ 2014-03-03 19:32 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs On Mar 3, 2014, at 10:05, Peter Hull <peterhull90@gmail.com> wrote: > It’s not as exciting as real hardware but you could always run it on a virtual machine. I’ve got it running fine on VirtualBox, with networking (internet and between VMs) Please post *actual* *working* config files to the wiki! There is much anecdotal talk of 9 under various VMs, but almost no actual evidence of how to make it work. FWIW, I have QEMU configs coming in a day or two. --lyndon ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 19:32 ` Lyndon Nerenberg @ 2014-03-03 20:28 ` Alexandru Gheorghe 2014-03-03 20:37 ` erik quanstrom 0 siblings, 1 reply; 19+ messages in thread From: Alexandru Gheorghe @ 2014-03-03 20:28 UTC (permalink / raw) To: 9fans [-- Attachment #1: Type: text/plain, Size: 758 bytes --] Networking for VBox was covered in some older posts. A search in the ml's archive should find them. On 03/03/2014 09:32 PM, Lyndon Nerenberg wrote: > > On Mar 3, 2014, at 10:05, Peter Hull <peterhull90@gmail.com> wrote: > >> It’s not as exciting as real hardware but you could always run it on a virtual machine. I’ve got it running fine on VirtualBox, with networking (internet and between VMs) > > Please post *actual* *working* config files to the wiki! There is much anecdotal talk of 9 under various VMs, but almost no actual evidence of how to make it work. > > FWIW, I have QEMU configs coming in a day or two. > > --lyndon > > -- ; Alexandru Gheorghe ; alghe.global {at} gmail {dot} com ; OpenPGP key ID 0xCAF985D2 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 853 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 20:28 ` Alexandru Gheorghe @ 2014-03-03 20:37 ` erik quanstrom 2014-03-03 20:52 ` Alexandru Gheorghe 2014-03-03 21:06 ` Lyndon Nerenberg 0 siblings, 2 replies; 19+ messages in thread From: erik quanstrom @ 2014-03-03 20:37 UTC (permalink / raw) To: 9fans On Mon Mar 3 15:30:02 EST 2014, alghe.global@gmail.com wrote: > Networking for VBox was covered in some older posts. A search in the > ml's archive should find them. vbox networking changes with every minor release, and interacts with the local physical hardware, and os version. so the archives are not necessarly helpful. - erik ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 20:37 ` erik quanstrom @ 2014-03-03 20:52 ` Alexandru Gheorghe 2014-03-03 20:53 ` Lyndon Nerenberg 2014-03-03 21:50 ` Peter Hull 2014-03-03 21:06 ` Lyndon Nerenberg 1 sibling, 2 replies; 19+ messages in thread From: Alexandru Gheorghe @ 2014-03-03 20:52 UTC (permalink / raw) To: 9fans [-- Attachment #1: Type: text/plain, Size: 817 bytes --] On 03/03/2014 10:37 PM, erik quanstrom wrote: > On Mon Mar 3 15:30:02 EST 2014, alghe.global@gmail.com wrote: > >> Networking for VBox was covered in some older posts. A search in the >> ml's archive should find them. > > vbox networking changes with every minor release, and interacts with > the local physical hardware, and os version. so the archives are not > necessarly helpful. > > - erik > should we gather some configuration steps/examples for known stable builds of vbox and post them in a wiki somewhere(?) at least people could resort to those and omit the minor releases,until a major (for which we write yet another entry in wiki if necessary and breaks plan9). is this reasonable? -- ; Alexandru Gheorghe ; alghe.global {at} gmail {dot} com ; OpenPGP key ID 0xCAF985D2 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 853 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 20:52 ` Alexandru Gheorghe @ 2014-03-03 20:53 ` Lyndon Nerenberg 2014-03-03 22:19 ` Alexandru Gheorghe 2014-03-03 21:50 ` Peter Hull 1 sibling, 1 reply; 19+ messages in thread From: Lyndon Nerenberg @ 2014-03-03 20:53 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs On Mar 3, 2014, at 12:52, Alexandru Gheorghe <alghe.global@gmail.com> wrote: > should we gather some configuration steps/examples for known stable > builds of vbox and post them in a wiki somewhere(?) Yes! That's what the wiki is for. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 20:53 ` Lyndon Nerenberg @ 2014-03-03 22:19 ` Alexandru Gheorghe 2014-03-05 20:23 ` Alexandru Gheorghe 0 siblings, 1 reply; 19+ messages in thread From: Alexandru Gheorghe @ 2014-03-03 22:19 UTC (permalink / raw) To: 9fans [-- Attachment #1: Type: text/plain, Size: 1472 bytes --] On 03/03/2014 10:53 PM, Lyndon Nerenberg wrote: > > On Mar 3, 2014, at 12:52, Alexandru Gheorghe <alghe.global@gmail.com> wrote: > >> should we gather some configuration steps/examples for known stable >> builds of vbox and post them in a wiki somewhere(?) > > Yes! That's what the wiki is for. > sure, I agree. I am only enquiring so as to brainstorm if we should actually (and be better of) providing a sort of how-to in debugging network setup on plan9 (besides what is already on the net). i.e., even if somebody runs into trouble (ultimately), it is better off posting his output of: cat /net/ndb ls /net | grep ether (optional) ls /net/ether* ip/ipconfig -DGP in case he/she is running in recv timeout for 15 secs; shortcut: ppid=`{ps | grep ipconfig | awk '{print $2}'} echo kill > /proc/$ppid/note sorry for the ` as I am writing from GNU/Linux this may not fully represent what is needed, but this is what I could gather in few minutes of man pages and some trial and error, after only 30 minutes of Plan9 experience. so I am sure far more experienced users from the mailinglist can contribute to the article I will try to tackle it this weekend from this approach/point of view, maybe I can come up with something rather useful, if not, at least networking setup for the build I use of vbox/os/version etc. -- ; Alexandru Gheorghe ; alghe.global {at} gmail {dot} com ; OpenPGP key ID 0xCAF985D2 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 853 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 22:19 ` Alexandru Gheorghe @ 2014-03-05 20:23 ` Alexandru Gheorghe 2014-03-05 20:43 ` Peter Hull ` (2 more replies) 0 siblings, 3 replies; 19+ messages in thread From: Alexandru Gheorghe @ 2014-03-05 20:23 UTC (permalink / raw) To: 9fans [-- Attachment #1: Type: text/plain, Size: 3221 bytes --] On 03/04/2014 12:19 AM, Alexandru Gheorghe wrote: > On 03/03/2014 10:53 PM, Lyndon Nerenberg wrote: >> >> On Mar 3, 2014, at 12:52, Alexandru Gheorghe <alghe.global@gmail.com> wrote: >> >>> should we gather some configuration steps/examples for known stable >>> builds of vbox and post them in a wiki somewhere(?) >> >> Yes! That's what the wiki is for. >> > > sure, I agree. I am only enquiring so as to brainstorm if we should > actually (and be better of) providing a sort of how-to in debugging > network setup on plan9 (besides what is already on the net). > > i.e., even if somebody runs into trouble (ultimately), it is better off > posting his output of: > > cat /net/ndb > > ls /net | grep ether (optional) > ls /net/ether* > > ip/ipconfig -DGP > > > in case he/she is running in recv timeout for 15 secs; shortcut: > > ppid=`{ps | grep ipconfig | awk '{print $2}'} > echo kill > /proc/$ppid/note > > sorry for the ` as I am writing from GNU/Linux > > > this may not fully represent what is needed, but this is what I could > gather in few minutes of man pages and some trial and error, after only > 30 minutes of Plan9 experience. so I am sure far more experienced users > from the mailinglist can contribute to the article > > I will try to tackle it this weekend from this approach/point of view, > maybe I can come up with something rather useful, if not, at least > networking setup for the build I use of vbox/os/v ersion etc. > Hmm, actually related to this, I encounter dhcprecv read timed out. I searched and seems there are some interrupt related "issues", this happens with VirtualBox (4.1.18_Debian r78361) for me, not on bare metal. NIC is in NAT, tried with a second NIC in bridged; definitely not the NIC as the below code also points out in !0 and !1 dhcp.c: ------- void dhcprecv(void) { [...] uchar buf[8000], vopts[256], taddr[IPaddrlen]; [...] memset(buf, 0, sizeof buf); alarm(1000); !0 n = read(conf.fd, buf, sizeof buf); alarm(0); if(n < 0){ rerrstr(err, sizeof err); !1 if(strstr(err, "interrupt") == nil) warning("dhcprecv: bad read: %s", err); else DEBUG("dhcprecv: read timed out"); return; n <- ipconfig.h: ---------------- typedef struct Conf Conf; [...] struct Conf { [...] /* dhcp specific */ int fd; Any ideas? I don't seem to find plan9.ini to try the fix Akshat Kumar pointed out in [1]; all the other answers from erik and ron are bare metal hardware related (like the original post). How to deal with this in VirtualBox? Chipset is PIIX3 [2] References: [1] https://groups.google.com/forum/?_escaped_fragment_=topic/comp.os.plan9/9nlmIoY4-C8#!topic/comp.os.plan9/9nlmIoY4-C8 [2] https://www.virtualbox.org/manual/ch03.html#settings-motherboard (under Chipset section) -- there is another option "ICH9" and the MSI seems a plus; not sure how this will interact with Plan9 but I'll give it a go -- ; Alexandru Gheorghe ; alghe.global {at} gmail {dot} com ; OpenPGP key ID 0xCAF985D2 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 853 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-05 20:23 ` Alexandru Gheorghe @ 2014-03-05 20:43 ` Peter Hull 2014-03-05 20:48 ` Alexandru Gheorghe 2014-03-05 20:45 ` Alexandru Gheorghe 2014-03-05 20:46 ` Peter Hull 2 siblings, 1 reply; 19+ messages in thread From: Peter Hull @ 2014-03-05 20:43 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs On Wed, Mar 5, 2014 at 8:23 PM, Alexandru Gheorghe <alghe.global@gmail.com> wrote: > On 03/04/2014 12:19 AM, Alexandru Gheorghe wrote: >> On 03/03/2014 10:53 PM, Lyndon Nerenberg wrote: >>> >>> On Mar 3, 2014, at 12:52, Alexandru Gheorghe <alghe.global@gmail.com> wrote: >>> >>>> should we gather some configuration steps/examples for known stable >>>> builds of vbox and post them in a wiki somewhere(?) I've got some instructions for running Plan 9 on Virtual Box, I was going to post them on the wiki as Alexandru Gheorghe suggested. I got onto the wiki and tried to edit the sandbox as a first step but got a curious error when I tried to Put: Wiki commit 1028330739 12 -1: '/sys/lib/wiki/d/2.hist' permission denied. Anyway here are the instructions for future reference. PLAN9 INSTALL ============= VirtualBox ---------- Set up VM in Virtual Box v4.3.8, OS X 9 host, recent (2014-03-02) CD Plan9.iso 64MB RAM 2GB hard disk NAT network, Intel PRO/1000 MT Server (82545EM) PIIX3 chipset PS/2 Mouse No USB No Serial No Sound VT-x/AMD-V enabled Storage PIIX4 IDE controller Install from CD --------------- Monitor: 1024x768x8 VESA Mouse: PS2INTELLIMOUSE Accept all defaults Location of archives: / Plan 9 boot, install MBR Remove the virtual CD from the virtual drive Reboot (type CTRL-T CTRL-T R) Login ----- Accept default on 'Root is from:' User: glenda Get familiar with rio/acme Net Access ---------- Open /rc/bin/termrc in acme Uncomment the lines # if (! test -e /net/ipifc/0/ctl) # ip/ipconfig and reboot. ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-05 20:43 ` Peter Hull @ 2014-03-05 20:48 ` Alexandru Gheorghe 0 siblings, 0 replies; 19+ messages in thread From: Alexandru Gheorghe @ 2014-03-05 20:48 UTC (permalink / raw) To: 9fans [-- Attachment #1: Type: text/plain, Size: 303 bytes --] On 03/05/2014 10:43 PM, Peter Hull wrote: > NAT network, Intel PRO/1000 MT Server (82545EM) so it seems this nic model works best with Plan9 within VirtualBox > PIIX3 chipset and this as well thanks! -- ; Alexandru Gheorghe ; alghe.global {at} gmail {dot} com ; OpenPGP key ID 0xCAF985D2 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 853 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-05 20:23 ` Alexandru Gheorghe 2014-03-05 20:43 ` Peter Hull @ 2014-03-05 20:45 ` Alexandru Gheorghe 2014-03-05 20:46 ` Peter Hull 2 siblings, 0 replies; 19+ messages in thread From: Alexandru Gheorghe @ 2014-03-05 20:45 UTC (permalink / raw) To: 9fans [-- Attachment #1: Type: text/plain, Size: 3748 bytes --] On 03/05/2014 10:23 PM, Alexandru Gheorghe wrote: > On 03/04/2014 12:19 AM, Alexandru Gheorghe wrote: >> On 03/03/2014 10:53 PM, Lyndon Nerenberg wrote: >>> >>> On Mar 3, 2014, at 12:52, Alexandru Gheorghe <alghe.global@gmail.com> wrote: >>> >>>> should we gather some configuration steps/examples for known stable >>>> builds of vbox and post them in a wiki somewhere(?) >>> >>> Yes! That's what the wiki is for. >>> >> >> sure, I agree. I am only enquiring so as to brainstorm if we should >> actually (and be better of) providing a sort of how-to in debugging >> network setup on plan9 (besides what is already on the net). >> >> i.e., even if somebody runs into trouble (ultimately), it is better off >> posting his output of: >> >> cat /net/ndb >> >> ls /net | grep ether (optional) >> ls /net/ether* >> >> ip/ipconfig -DGP >> >> >> in case he/she is running in recv timeout for 15 secs; shortcut: >> >> ppid=`{ps | grep ipconfig | awk '{print $2}'} >> echo kill > /proc/$ppid/note >> >> sorry for the ` as I am writing from GNU/Linux >> >> >> this may not fully represent what is needed, but this is what I could >> gather in few minutes of man pages and some trial and error, after only >> 30 minutes of Plan9 experience. so I am sure far more experienced users >> from the mailinglist can contribute to the article >> >> I will try to tackle it this weekend from this approach/point of view, >> maybe I can come up with something rather useful, if not, at least >> networking setup for the build I use of vbox/os/v > > ersion etc. >> > > Hmm, actually related to this, I encounter dhcprecv read timed out. > I searched and seems there are some interrupt related "issues", this > happens with VirtualBox (4.1.18_Debian r78361) for me, not on bare > metal. NIC is in NAT, tried with a second NIC in bridged; definitely not > the NIC as the below code also points out in !0 and !1 > > dhcp.c: > ------- > void > dhcprecv(void) > { > [...] > uchar buf[8000], vopts[256], taddr[IPaddrlen]; > [...] > memset(buf, 0, sizeof buf); > alarm(1000); > !0 n = read(conf.fd, buf, sizeof buf); > alarm(0); > > if(n < 0){ > rerrstr(err, sizeof err); > !1 if(strstr(err, "interrupt") == nil) > warning("dhcprecv: bad read: %s", err); > else > DEBUG("dhcprecv: read timed out"); > return; > > > n <- ipconfig.h: > ---------------- > typedef struct Conf Conf; > [...] > struct Conf > { > [...] > /* dhcp specific */ > int fd; > > > Any ideas? I don't seem to find plan9.ini to try the fix Akshat Kumar > pointed out in [1]; all the other answers from erik and ron are bare > metal hardware related (like the original post). How to deal with this > in VirtualBox? > > Chipset is PIIX3 [2] > > > References: > [1] > https://groups.google.com/forum/?_escaped_fragment_=topic/comp.os.plan9/9nlmIoY4-C8#!topic/comp.os.plan9/9nlmIoY4-C8 > > [2] https://www.virtualbox.org/manual/ch03.html#settings-motherboard > (under Chipset section) -- there is another option "ICH9" and the MSI > seems a plus; not sure how this will interact with Plan9 but I'll give > it a go > OK, bad idea. I got it fixed finally. Chipset for motherboard certainly: PIIX3 NIC info: - Attached: NAT - Adapter type (changing this made it working): Intel PRO/1000 MT Server (82545EM) - Promisc. mode: Deny - No port forwarding Can ping IPs (Google dns: 8.8.8.8 for example), now I have to setup dns. -- ; Alexandru Gheorghe ; alghe.global {at} gmail {dot} com ; OpenPGP key ID 0xCAF985D2 [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 853 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-05 20:23 ` Alexandru Gheorghe 2014-03-05 20:43 ` Peter Hull 2014-03-05 20:45 ` Alexandru Gheorghe @ 2014-03-05 20:46 ` Peter Hull 2 siblings, 0 replies; 19+ messages in thread From: Peter Hull @ 2014-03-05 20:46 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs On Wed, Mar 5, 2014 at 8:23 PM, Alexandru Gheorghe <alghe.global@gmail.com> wrote: > Hmm, actually related to this, I encounter dhcprecv read timed out. I got those kind of errors for every type of network card apart from 'Intel PRO/1000 Server (82545EM)' Which one are you using? Pete ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 20:52 ` Alexandru Gheorghe 2014-03-03 20:53 ` Lyndon Nerenberg @ 2014-03-03 21:50 ` Peter Hull 1 sibling, 0 replies; 19+ messages in thread From: Peter Hull @ 2014-03-03 21:50 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs On 3 Mar 2014, at 20:52, Alexandru Gheorghe <alghe.global@gmail.com> wrote: > should we gather some configuration steps/examples for known stable > builds of vbox and post them in a wiki somewhere(?) at least people > could resort to those and omit the minor releases,until a major (for > which we write yet another entry in wiki if necessary and breaks plan9). I will try and reinstall my setup and note down the configurations for the wiki. Pete ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 20:37 ` erik quanstrom 2014-03-03 20:52 ` Alexandru Gheorghe @ 2014-03-03 21:06 ` Lyndon Nerenberg 1 sibling, 0 replies; 19+ messages in thread From: Lyndon Nerenberg @ 2014-03-03 21:06 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs On Mar 3, 2014, at 12:37, erik quanstrom <quanstro@quanstro.net> wrote: > vbox networking changes with every minor release, and interacts with > the local physical hardware, and os version. so the archives are not > necessarly helpful. I have a Labs kernel still running in a Parallels VM I created in 2010. But I have been unable to install a new Plan9 in any 2011 or later version of Parallels (including the 9front or the many 9atom variants). This is why it is important to document the explicit versions of the host OS, the VM software, and the 9 kernel, of *working* configurations. --lyndon ^ permalink raw reply [flat|nested] 19+ messages in thread
* [9fans] Welcome Plan 9 community @ 2014-03-03 17:15 Szymon Olewniczak 2014-03-03 17:23 ` Szymon Olewniczak 0 siblings, 1 reply; 19+ messages in thread From: Szymon Olewniczak @ 2014-03-03 17:15 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs Hi, I've just registerd to this mailing list, so hello everyone. I've read about Plan 9 several months ago and fascinated with ideas behind this OS. Now I've decided to try the system on my own and although I don't know much about it yet, I believe that it can be something that I would like to work for(I'm an IT student, so if I find myself clever enough to understand the power of Plan 9, I will try to help the project during the GOSC). But to begin with the main issue that brings me to write this message. I know that before I can do anything on Plan 9, I need hardware that cooperate with it. I've read the Supported PC Hardware[0] and realised that there is not much of it. Is there only one reliable motherboard (ASUS A8R32-MVP without NIC) that can run Plan9? I've also read there that there are several laptops pointed in this page without any additional comments in brackets. Does it mean that they are fully supported? I've also read that RaspberryPI can run Plan 9. I have RP rev. 2 so maybe it should be the hardware which I can use to start my Plan 9 adventure. What hardware can you recommend? What hardware do you use? Is there is any PC that can run both Plan 9 and Inferno? [0]http://www.plan9.bell-labs.com/wiki/plan9/Supported_PC_hardware/index.html ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [9fans] Welcome Plan 9 community 2014-03-03 17:15 Szymon Olewniczak @ 2014-03-03 17:23 ` Szymon Olewniczak 0 siblings, 0 replies; 19+ messages in thread From: Szymon Olewniczak @ 2014-03-03 17:23 UTC (permalink / raw) To: Fans of the OS Plan 9 from Bell Labs > Hi, > I've just registerd to this mailing list, so hello everyone. > > I've read about Plan 9 several months ago and fascinated with ideas > behind this OS. Now I've decided to try the system on my own and although > I don't know much about it yet, I believe that it can be something that > I would like to work for(I'm an IT student, so if I find myself clever > enough to understand the power of Plan 9, I will try to help the project > during the GOSC). > > But to begin with the main issue that brings me to write this message. I > know that before I can do anything on Plan 9, I need hardware that > cooperate with it. I've read the Supported PC Hardware[0] and > realised that there is not much of it. Is there only one reliable motherboard > (ASUS A8R32-MVP without NIC) that can run Plan9? I've also read there that > there are several laptops pointed in this page without any additional > comments in brackets. Does it mean that they are fully supported? I've > also read that RaspberryPI can run Plan 9. I have RP rev. 2 so maybe it > should be the hardware which I can use to start my Plan 9 adventure. > > What hardware can you recommend? What hardware do you use? Is there is > any PC that can run both Plan 9 and Inferno? > > [0]http://www.plan9.bell-labs.com/wiki/plan9/Supported_PC_hardware/index.html > Sorry for post duplicate. ^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2014-03-05 20:48 UTC | newest] Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-03-02 22:16 [9fans] Welcome Plan 9 community Szymon Olewniczak 2014-03-03 1:05 ` erik quanstrom 2014-03-03 5:54 ` Grant Mather 2014-03-03 18:05 ` Peter Hull 2014-03-03 19:32 ` Lyndon Nerenberg 2014-03-03 20:28 ` Alexandru Gheorghe 2014-03-03 20:37 ` erik quanstrom 2014-03-03 20:52 ` Alexandru Gheorghe 2014-03-03 20:53 ` Lyndon Nerenberg 2014-03-03 22:19 ` Alexandru Gheorghe 2014-03-05 20:23 ` Alexandru Gheorghe 2014-03-05 20:43 ` Peter Hull 2014-03-05 20:48 ` Alexandru Gheorghe 2014-03-05 20:45 ` Alexandru Gheorghe 2014-03-05 20:46 ` Peter Hull 2014-03-03 21:50 ` Peter Hull 2014-03-03 21:06 ` Lyndon Nerenberg 2014-03-03 17:15 Szymon Olewniczak 2014-03-03 17:23 ` Szymon Olewniczak
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).