[9fans] problem with installing plan9

[9fans] problem with installing plan9

[Artem Pylypchuk]

> Date: Tue, 2 Mar 2010 13:21:59 +0100
> From: Rudolf Sykora <rudolf.sykora@gmail.com>
> Subject: [9fans] problem with installing plan9
> To: Fans of the OS Plan 9 from Bell Labs <9fans@9fans.net>
> Message-ID:
> 	<a560a5d01003020421m20aa6ed3ta3338545850fb4f1@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hello,
>
> the day before yesterday I downloaded an iso image of Plan 9 and tried
> to install it. Something went wrong, no idea what...
> Can you help?
> I've attached two photos of my screen.
>
> When I try about 2-year-old plan 9 CD, this doesn't happen...
>
> Thanks
> Ruda

looks like CD read errors..

ps: what is the brand of this monitor?

Re: [9fans] problem with installing plan9

[Rudolf Sykora]

> looks like CD read errors..

Not sure about this. First, I can somehow use the CD (there still are
similar error messages, but finally there is a prompt using which you
can select to install the system from the CD) on another computer.
Second, I tried to read the CD using linux 'dd' command
dd </dev/hdc >/dev/null
and it finished OK twice... (i.e. reading went OK)

> ps: what is the brand of this monitor?

If I can tell it's AOC LM720A, why?

Thanks
R

Re: [9fans] problem with installing plan9

[Alexander Sychev]

Hello!

> looks like CD read errors..

This is not CD read errors.

"bios 0: drive 0x80: 80.026,361,856 bytes, type 3" - drive 0x80 is the  
hard drive, isn't it?
"biosdiskcall: int 13 op 0x42 drive 0x80 failed, ah error 0x80"
"sectread: bios failed to read 512  @ sector 0 of 0x80" - an error with  
reading of the first sector of the drive 0x80

-- 
Best regards,
   santucco

Re: [9fans] problem with installing plan9

[erik quanstrom]

> "bios 0: drive 0x80: 80.026,361,856 bytes, type 3" - drive 0x80 is the
> hard drive, isn't it?
> "biosdiskcall: int 13 op 0x42 drive 0x80 failed, ah error 0x80"
> "sectread: bios failed to read 512  @ sector 0 of 0x80" - an error with
> reading of the first sector of the drive 0x80

if you can just use the 9load at
http://ftp.quanstro.net/other/9load
try that, otherwise, try the cd image at
http://ftp.quanstro.net/other/9atom.iso.bz2

- erik

Re: [9fans] problem with installing plan9

[Alexander Sychev]

[-- Attachment #1: Type: text/plain, Size: 711 bytes --]

Thanks, Erik!

At least I have found the iso image
ftp://ftp.quanstro.net/other/plan9.iso.bz2 works quite correctly (even with
venti!).

On Wed, Mar 3, 2010 at 6:07 AM, erik quanstrom <quanstro@quanstro.net>wrote:

> > "bios 0: drive 0x80: 80.026,361,856 bytes, type 3" - drive 0x80 is the
> > hard drive, isn't it?
> > "biosdiskcall: int 13 op 0x42 drive 0x80 failed, ah error 0x80"
> > "sectread: bios failed to read 512  @ sector 0 of 0x80" - an error with
> > reading of the first sector of the drive 0x80
>
> if you can just use the 9load at
> http://ftp.quanstro.net/other/9load
> try that, otherwise, try the cd image at
> http://ftp.quanstro.net/other/9atom.iso.bz2
>
> - erik
>
>

[-- Attachment #2: Type: text/html, Size: 1299 bytes --]

Re: [9fans] problem with installing plan9

[erik quanstrom]

> Thanks, Erik!
>
> At least I have found the iso image
> ftp://ftp.quanstro.net/other/plan9.iso.bz2 works quite correctly (even with
> venti!).

you're welcome.

- erik

[9fans] problem with installing plan9

[Rudolf Sykora]

[-- Attachment #1: Type: text/plain, Size: 272 bytes --]

Hello,

the day before yesterday I downloaded an iso image of Plan 9 and tried
to install it. Something went wrong, no idea what...
Can you help?
I've attached two photos of my screen.

When I try about 2-year-old plan 9 CD, this doesn't happen...

Thanks
Ruda

[-- Attachment #2: IMG_2245_1.JPG --]
[-- Type: image/jpeg, Size: 89874 bytes --]

[-- Attachment #3: IMG_2246_1.JPG --]
[-- Type: image/jpeg, Size: 83234 bytes --]

Re: [9fans] problem with installing plan9

[Alexander Sychev]

Hello!

I have the same problem on my IBM ThinkPad T42 with ISO images at least  
since 20 Feb 2010.
But after some waiting, the installation menu appears.
After the installation Plan9 starts without the errors with sectors  
reading.

Actually, in my installation rio can't start due an error printed by  
aux/vga: '"type radeon" is wrong command' or something like this (can't  
say exactly for now).

With "Boot Plan from this CD" rio doesn't work with the same error.
But with "Install Plan9 from this CD" rio works quite well.

All these problems didn't have a place in the january.

On Tue, 02 Mar 2010 15:21:59 +0300, Rudolf Sykora  
<rudolf.sykora@gmail.com> wrote:

> Hello,
>
> the day before yesterday I downloaded an iso image of Plan 9 and tried
> to install it. Something went wrong, no idea what...
> Can you help?
> I've attached two photos of my screen.
>
> When I try about 2-year-old plan 9 CD, this doesn't happen...
>
> Thanks
> Ruda


-- 
Best regards,
   santucco

Re: [9fans] problem with installing plan9

[erik quanstrom]

> Hello,
>
> the day before yesterday I downloaded an iso image of Plan 9 and tried
> to install it. Something went wrong, no idea what...
> Can you help?
> I've attached two photos of my screen.
>
> When I try about 2-year-old plan 9 CD, this doesn't happen...

looks like biosload (or bios) is screwing up and making further
drive detection impossible.  if you aren't booting from
usb, you could try 9atom. (ftp://ftp.quanstro.net/other/9atom.iso.bz2)

- erik

Re: [9fans] problem with installing plan9

[Rudolf Sykora]

[-- Attachment #1: Type: text/plain, Size: 614 bytes --]

On 2 March 2010 14:39, erik quanstrom <quanstro@quanstro.net> wrote:
> looks like biosload (or bios) is screwing up and making further
> drive detection impossible.  if you aren't booting from
> usb, you could try 9atom. (ftp://ftp.quanstro.net/other/9atom.iso.bz2)
>
> - erik

Hello,

I tried 9atom and got much further, but again hit something...
Everything goes well until about 50 % in the 'copydist' installation
task. Then I start getting messages caught in the attached pictures...
Finally I get the prompt saying 'Task to do [copydist]:'
Can anybody tell what's going on now?

Thanks
Ruda

[-- Attachment #2: IMG_2261.JPG --]
[-- Type: image/jpeg, Size: 47882 bytes --]

[-- Attachment #3: IMG_2263.JPG --]
[-- Type: image/jpeg, Size: 62972 bytes --]

[-- Attachment #4: IMG_2264.JPG --]
[-- Type: image/jpeg, Size: 52688 bytes --]

Re: [9fans] problem with installing plan9

[erik quanstrom]

> On 2 March 2010 14:39, erik quanstrom <quanstro@quanstro.net> wrote:
> > looks like biosload (or bios) is screwing up and making further
> > drive detection impossible.  if you aren't booting from
> > usb, you could try 9atom. (ftp://ftp.quanstro.net/other/9atom.iso.bz2)
> >
> > - erik
>
> Hello,
>
> I tried 9atom and got much further, but again hit something...
> Everything goes well until about 50 % in the 'copydist' installation
> task. Then I start getting messages caught in the attached pictures...
> Finally I get the prompt saying 'Task to do [copydist]:'
> Can anybody tell what's going on now?

this is my fault.  fortuantely these messages should be
harmless.

the problem is that i put some impossible permissions on the cd.
and replica is warning that it can't replicate these permissions.

let me know if things really don't work.

- erik

Re: [9fans] problem with installing plan9

[Rudolf Sykora]

[-- Attachment #1: Type: text/plain, Size: 1406 bytes --]

On 2 March 2010 21:07, erik quanstrom <quanstro@quanstro.net> wrote:
>> I tried 9atom and got much further, but again hit something...
>> Everything goes well until about 50 % in the 'copydist' installation
>> task. Then I start getting messages caught in the attached pictures...
>> Finally I get the prompt saying 'Task to do [copydist]:'
>> Can anybody tell what's going on now?
>
> this is my fault.  fortuantely these messages should be
> harmless.
>
> the problem is that i put some impossible permissions on the cd.
> and replica is warning that it can't replicate these permissions.
>
> let me know if things really don't work.
>
> - erik
>

Ok.
So those errors are also only warnings? (there were two types of
messages, one starting with 'warning', other with 'error')

Anyway, after running 'copydist' for the first time the installation
program promted, as I said, 'copydist' again. I hit enter, then after
it has finished (it actually as if tries to do the same as it did for
the first time; producing the same or at least very similar messages)
it offers to configure the boot loader, then finish. After reboot I
saw what is attached as a picture. :(
When I rebooted again, it didn't stop, spat a lot other error messages
and now I am getting trillion messages as depicted in the second
picture...
Endless today :)

Any suggestion now?

Thanks for help!
R

[-- Attachment #2: IMG_2266.JPG --]
[-- Type: image/jpeg, Size: 71689 bytes --]

[-- Attachment #3: IMG_2267.JPG --]
[-- Type: image/jpeg, Size: 110351 bytes --]

Re: [9fans] problem with installing plan9

[erik quanstrom]

> Any suggestion now?

i'd guess the vlong divide-by-zero is caused by a
sector size of 0 somewhere in the kernel. but
that's a wild guess.  hard to grep for that easily.
try unplugging your cdrom.

boot the cd.  use it to edit your plan9.ini.
set "*nodumpstack=0".  set "*idemaxio=64".
you might also consider either turning on ahci
mode in bios, or setting "*sdXXdma=on".
where XX is your drive letter.

- erik

Re: [9fans] problem with installing plan9

[Rudolf Sykora]

[-- Attachment #1: Type: text/plain, Size: 1298 bytes --]

On 2 March 2010 22:19, erik quanstrom <quanstro@quanstro.net> wrote:
> i'd guess the vlong divide-by-zero is caused by a
> sector size of 0 somewhere in the kernel. but
> that's a wild guess.  hard to grep for that easily.
> try unplugging your cdrom.
>
> boot the cd.  use it to edit your plan9.ini.
> set "*nodumpstack=0".  set "*idemaxio=64".
> you might also consider either turning on ahci
> mode in bios, or setting "*sdXXdma=on".
> where XX is your drive letter.
>
> - erik

I tried a few things but still no victory.

Btw. Before installation I had to manually 'randomize' my disk
otherwise the installation program would claim there are some tasks
already done (e.g. when 1st trying to use only fossil and then
restarting the installation and wanting venti as well, it was somehow
satisfied with the previous partition division, though there was not
arenas...).

Anyway, I could install the system and boot, but after a short time
(say 20 s) I get a lot of messages and the system freezes. I am
sending a picture depicting this.
I really don't understand what's wrong...

Is it ok to use an old installation (which, if I remember, worked for
me) disk and then simply run pull?
Do I get the same system then as with the new installation disk?

Thanks
Ruda

[-- Attachment #2: IMG_2269.JPG --]
[-- Type: image/jpeg, Size: 126900 bytes --]

Re: [9fans] problem with installing plan9

[Rudolf Sykora]

On 2 March 2010 22:19, erik quanstrom <quanstro@quanstro.net> wrote:
>> Any suggestion now?
>
Now it seems that as long as I don't try to back up fossil with venti
(i.e. I choose just fossil and not fossil+venti in the installation
process), I can use the 9atom CD.

Any attempt to use venti too resulted in a failure sooner or later, as
was depicted in my posts. No hint why...

But at least I have some plan 9 running now...

Ruda

Re: [9fans] problem with installing plan9

[kokamoto]

> Any attempt to use venti too resulted in a failure sooner or later, as
> was depicted in my posts. No hint why...

Is your error messages indicate (1)cannot connected to venti server
or (2)write error to some area in arenas?

Kenji

Re: [9fans] problem with installing plan9

[erik quanstrom]

On Mon Mar  8 08:28:37 EST 2010, kokamoto@hera.eonet.ne.jp wrote:
> > Any attempt to use venti too resulted in a failure sooner or later, as
> > was depicted in my posts. No hint why...
>
> Is your error messages indicate (1)cannot connected to venti server
> or (2)write error to some area in arenas?

it was a write error.  it's likely that there just wasn't
enough memory on a 128mb machine for venti.

- erik

Re: [9fans] problem with installing plan9

[Rudolf Sykora]

On 8 March 2010 16:20, erik quanstrom <quanstro@labs.coraid.com> wrote:
> On Mon Mar  8 08:28:37 EST 2010, kokamoto@hera.eonet.ne.jp wrote:
>> > Any attempt to use venti too resulted in a failure sooner or later, as
>> > was depicted in my posts. No hint why...
>>
>> Is your error messages indicate (1)cannot connected to venti server
>> or (2)write error to some area in arenas?
>
> it was a write error.  it's likely that there just wasn't
> enough memory on a 128mb machine for venti.
>
> - erik

Actually, how much memory do I have to have to be able to run venti?
And why so much?

Thanks!
Ruda

Re: [9fans] problem with installing plan9

[kokamoto]

> it was a write error.  it's likely that there just wasn't
> enough memory on a 128mb machine for venti.

I see.
Another point I'd like to say is that the installer doesn't set
memory parameters for venti, such as mem, bcmem...etc,
which caused very huge use of memory in my case.

Kenji

Re: [9fans] problem with installing plan9

[David du Colombier]

> Any suggestion now?

I had this error when I accidentally turned on IDE mode, instead of
AHCI mode in the BIOS of my Supermicro X7SLA-H.

--
David du Colombier

Re: [9fans] problem with installing plan9

[Rudolf Sykora]

On 3 March 2010 08:27, David du Colombier <0intro@gmail.com> wrote:
>> Any suggestion now?
>
> I had this error when I accidentally turned on IDE mode, instead of
> AHCI mode in the BIOS of my Supermicro X7SLA-H.

Hmm,
my disk is not a SATA one (so then I believe AHCI is out of consideration)
R

Re: [9fans] problem with installing plan9

[David Leimbach]

[-- Attachment #1: Type: text/plain, Size: 678 bytes --]

That's because the new 9load is broken in some way for a large class of
hardware (it was for me too, and older ISOs worked just fine).  Erik's 9atom
iso seems to have the problem fixed, and no one has merged the changes back
yet for one reason or another that I've not come to understand.

Dave

On Tue, Mar 2, 2010 at 4:21 AM, Rudolf Sykora <rudolf.sykora@gmail.com>wrote:

> Hello,
>
> the day before yesterday I downloaded an iso image of Plan 9 and tried
> to install it. Something went wrong, no idea what...
> Can you help?
> I've attached two photos of my screen.
>
> When I try about 2-year-old plan 9 CD, this doesn't happen...
>
> Thanks
> Ruda
>

[-- Attachment #2: Type: text/html, Size: 975 bytes --]